Clutch kit

SACHS clutch kit for SEAT Ibiza 3
For SEAT Ibiza 3 (6L) :- 1.9 TDI 100hp (ATD, AXR)
228mm clutch kit complete with disc, mechanism and release bearing
Original SACHS quality

For Golf 4:
- 1.4 75hp (AHW, AKQ, APE, AXP, BCA)
- 1.9 SDi 68hp (AGP, AQM)

SACHS Clutch kit for Porsche 911 type 997 S version phase 1 :

- 997 phase 1 3.8 - 355 hp (M97.01) Carrera S from 2005 to 2008
- 997 phase 1 3.8 - 355 hp (M97.01) Carrera 4S from 2005 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera S from 2007 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera 4S from 2007 to 2008

Contains the clutch mechanism, disc and bearing.

Clutch Kit for Mercedes S Class

For Mercedes S Class W116 listed below:
- 280 S (116.020) From chassis No. 104065
- 280 SE (116.024) From chassis No. 117769
- 280 SEL (116.025) From chassis No. 117769

The clutch kit consists of the disc, mechanism and clutch release bearing
Diameter 230mm
German quality

For BMW E36 M3 3.2

This clutch conversion kit for 2cv AZA-AZAM (05/1966- 02/1970)is a conversion kit. It is compatible with 2CV and centrifugal or conventional clutch derivatives.

This clutch conversion kit for 2CV with 18 splines offers the comfort and precision of a diaphragm mechanism.
It offers more precise and progressive selection than the traditional 3-finger system without changing the flywheel.
This conversion kit includes:
- diaphragm mechanism
- release bearing
- clutch disc

Compatible models
- 2CV AZA type AZ-A: 06/1966 to 02/1970
- 2CV AZAM type AZ-AM: 06/1966 to 09/1967

Check for compatibility by counting the number of splines on your clutch disc fitting.

For A4 (B5) from engine N° 170 001->:
- 1.6 100hp (ADP, AHL, ARM, ANA)

Complete SACHS clutch kit diameter 228mm for BMW 3 series E46 :

Sedan :
- 316i 4cyl 1.9L 105hp phase 1 from 06/1998 to 03/2002 (engine code M43B19)
- 316i 4cyl 1.8L 115hp phase 2 from 05/2001 to 08/2003 (engine code N42B18)
- 318i 4cyl 1.9L 118hp phase 1 from 04/1997 to 09/2001 (engine code M43B19)

Compact :
- 316ti 4cyl 1.8L 115hp phase 1 from 01/2001 to 03/2003 (engine code N42B18)
- 316ti 4cyl 1.8L 115hp phase 2 from 04/2003 to 08/2003 (engine code N42B18)

Touring :
- 316i 4cyl 1.8L 115hp phase 2 from 10/2001 to 08/2003 (engine code N42B18)
- 318i 4cyl 1.9L 118hp phase 1 from 05/1998 to 08/2001 (engine code M43B19)

Coupé :
- 318ci 4cyl 1.9L 118hp phase 1 from 03/1999 to 08/2001 (engine code M43B19)

Kit includes :
- 1 10-tooth clutch disc
- 1 clutch mechanism
- 1 clutch release bearing

Supplied without dual mass flywheel (to be checked when replacing the clutch).

For Golf 6 :
- 1.4 80hp (CGGA)

For Polo Classic 6V2:
- 1.4 54hp and 60hp (AEX, AKV, ANX, APQ)

For Polo 6N2:
- 1.4 54hp and 60hp (AKK, AKP, AUD)

SASICclutch kit for Peugeot 206 S16 and RC
French original equipment quality part
Includes clutch disc, mechanism, release bearing and centering device.
Features:Disc diameter: 228mmRelease bearing diameter: 24.5mmNumber of splines: 18
Assignments :- 206 S16 - 2.0 16V 1997cm3 137hp (EW10J4) RFR phase 1 from 08/1999 to 07/2000- 206 S16 - 2.0 16V 1997cm3 138hp (EW10J4) RFN phase 1 from 08/2000 to 07/2002- 206 S16 - 2.0 16V 1997cm3 138hp (EW10J4) RFN phase 2 from 08/2002 to 07/2004- 206 RC - 2.0 16V 1997cm3 177hp (EW10J4S) phase 2 from 01/2003 to 07/2007

Kit d'embrayage pour VW Transporter T5 équipé d'un volant moteur bi-masse :
- 2.5 TDi 163cv (BLJ)
- 2.5 TDi 174cv (AXE, BPC)

For A3 (8L) including Quattro :
- 1.9 TDi 130hp (ASZ)

Clutch kit 220mm SACHS for Audi A3 (8P)
For Audi A3 (8P) :- 1.6 102hp (BGU, BSE, BSF)- 1.6 FSi 115hp (BAG, BLF, BLP)
Quality Original SACHS

Complete clutch kit diameter 228 mm
Mechanism + 23-tooth disc + stop.

For VW LT 28/31/35/40/45/50/55, Campmobil:
Engines:
- 2.4Diesel 75hp (DW), 12/1982 -> 07/1992
- 2.4 Diesel 70hp (1S), 08/1988-> 12/1995
- 2.4 Diesel 95hp (ACL), 08/1991 -> 12/1995
- 2.4 Diesel 70hp (ACT), 08/1992 -> 12/1995
- 2.4 Turbo-Diesel 102hp (DV), 12/1982 -> 07/1992
- 2.4 Turbo-Diesel 92hp (1G), 08/1988 -> 07/1992

For Audi 80 B1:
- 1.5 (YJ, ZB, ZC) 72 ->76
- 1.6 (FS, XX, YG, YH, YN, YP, YS) 72 ->78

For Audi 80 B2:
- 1.3 (EP) 08/81 ->08/86
- 1.6 (DT, JU, SA, RN, YN, YP, YS, YT, YY, YZ, XX) 78 ->08/86
- 1.6 Diesel (CR, JK) 80 ->87

For Audi Coupe 81 1.6 (YN) 80 ->82

This 4-part kit includes a rigid engine flywheel, a mechanism, a 190 disc mm and a clutch push rod. An inexpensive technical alternative to the original mounting, replacing the original clutch and double-mass engine flywheel.

For Lupo (6X/6E):
- 1.7 SDi 60hp (AKU) from 10/98 ->05/03

For Polo 4 (6N):
- 1.7 SDi 57hp and 60hp (AHG and AKU) from 03/98 ->10/99
- 1.9 Diesel 64hp (AEF) from 10/94 ->05/99
- 1.9 SDi 64hp (AGD) from 03/98 ->10/99

For Polo 4 (6N2):
- 1.7 SDi 60hp (AKU, AKW) from 10/99 ->04/00
- 1.9 Diesel 64hp (AEF) from 10/99 ->07/01
- 1.9 SDi 64hp (AGD, ASX) from 10/99 ->09/01

Clutch kit with 26 splines for a VOLKSWAGEN Transporter T5:
- 2.5 TDi 130hp (AXD)
- 2.5 TDi 131hp (BNZ)

Complete 210mm diameter clutch kit from BLUE PRINT for Volkswagen Golf 1 and Jetta 1:

Golf 1 Sedan and Jetta 1 :
- 1.5L, 1.6L, and 1.8L petrol
- GTI 1.8L 112hp (DX) from 1982 to 1983

Golf 1 Cabriolet :
- 1.8L (DX, EX, JH, 2H, JJ, KT) from 1982 onwards

Caddy :
- All gasoline engines

Kit includes :
- mechanism and screws
- Clutch disc
- Pressure plate and clip

Supplied without clutch release bearing (to be ordered separately).

The clutch transmits power from the engine to the gearbox. If it slips, the disc is probably too worn and needs to be replaced.

For E36 320 i without air conditioning:
- Saloon from 09/90 ->02/98
- Coupé from 03/92 ->04/99
- Cabriolet from 12/93 ->04/99