Front & rear panel

Front interior underframe for VW Combi Bay Window from 08/1973 to 07/1979

Steel front apron to weld onto the tip of the long bonnet
Export version with holes for USA bumper reinforcements.

For Beetle 1200 & 1300 USA 1947 ->07/1967
up to chassis no. ->117 999 000.

For VOLKSWAGEN Transporter T5 up to chassis ->7H-9-200000 or ->7J-9-020000

DANSK front panel for Porsche 914-4 and 914-6:
- 914-4 1.7 - 80 hp (022-W) from 1970 to 1973- 914-4 1.7 - 80 hp (022-EA) from 1972 to 1973- 914-4 1.7 - 72 hp (022-EB) from 1972 to 1973- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976- 914-6 2.0 - 110 hp (901.36/37/38/39) from 1970 to 1972
Body parts are delivered in stock paint and must be stripped and primed (epoxy or phosphate) before painting. Adjustment and tacking/welding are always necessary before paint preparation.

Front innerbody panel for VW Beetle from 1953 to 07/1957.

Weld-on rear window bracket plate
This high quality repair part is faithful to the original camper vans.

- For VW Split Window Camper Window T2 pick-up single & double cab
Years: 08/1952 ->07/1965

Front left bracket for Volkswagen Golf 7
For VW Golf 7 all sedan and estate models including Golf GTI, GTD and Golf R
Upper mounting bracketLeft side (driver)

Front panel for Audi A3 :
Audi A3 8P:
- 1.2 TSI- 1.4 TFSI- 1.6 TDI- 1.8 TFSI- 1.9 TDI- 2.0 TDI- 2.0 TFSI- 3.2 V6 Quattro- S3 2.0 Quattro
Please note! Not suitable for models prior to 06/2008.
Original part number :
8P0 805 588 L

This upper front crossmember for Peugeot 504 is a reproduction.
Stamped in Europe, this upper front crossmember is located below the radiator grille. It is compatible with all Peugeot 504 models, sedans, station wagons, station wagons and pick-ups.
Not suitable for Peugeot 504 Coupés and Convertibles!

Top-of-the-range remanufactured rear panel with structure for trunk lock striker for BMW 02 Series E10 phase 2 version Europe or USA from 09/1973 to 07/1977:

Sedan :
- 1602 85hp phase 2 from 09/1973 to 10/1975 (engine code M116)
- 1802 90hp phase 2 from 09/1973 to 05/1975 (engine code M118)
- 1802A auto phase 2 90hp from 07/1974 to 09/1974 (engine code M118)

Cabriolet :
- 1502 1.6l 75hp phase 2 from 11/1974 to 07/1977 (engine code M116)
- 2002 100hp phase 2 from 09/1973 to 11/1975 (engine code M05)
- 2002A auto 100hp phase 2 from 09/1973 to 06/1975 (engine code M05)
- 2002tii 130hp phase 2 from 09/1973 to 11/1975 (engine code M15)

Cabriolet Baur Targa :
- 2002 100hp phase 2 from 09/1973 to 12/1975 (engine code M05)

WARNING: This rear apron is not suitable for 2002Turbo (the position of the exhaust outlet is different)!

Supplied without chrome mouldings or emblem.

INFORMATION: To fit the emblem (top right on phase 2), holes must be drilled to size. These holes are not pre-drilled on the panel, to allow perfect adaptation of the rear panel to each existing E10 model. The mounting holes for the chrome moldings are also present.

Over the course of its life, the rear end of your BMW usually shows signs of rust and various impacts.

The rear panel is delivered bare with black storage paint. Before final painting, it is essential to treat and prepare it to prevent corrosion from reappearing.

Treat your E10 to a high-quality body part!

This metal rear body panel for BMW E10 is "adaptable" because it does not come from the manufacturer.

For 628 x 377 mm radiator for 1 fan

Front metal panel for Mercedes C Class Type W202 Saloon and Type S202 Estate

Front panel for Fiat 500 R (1972-1975)


For R models with the "rectangular" Fiat logo positioned horizontally.

Made in Italy

Part covered with black protective paint, often scratched during transport/storage, must be removed before priming and painting.
Made from old molds, adjustments may be necessary to fit your vehicle perfectly.

Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

Trim for lower partof long front panel, version with radiator grille and round indicators (AC1). Modelwithout headlamp washer hole.

For Transporter T4, Multivan,Caravelle, 01/1996 ->04/2003
chassis no. 70-T-200 000 ->70-3-200 000.

Replacement plate for top of front panel bulkhead below windscreen, to be welded.

For VW Transporter T25/T3, Bus, Van,
Caravelle, Carat, Joker, Syncro (4 x 4)
Years: 05/1979 -> 07/1992
Right-hand drive (RHD) model.

Outer plate to repair the rear left-hand door.

For VW Transporter T4, 09/1990 ->06/2003
All models with swing doors.

Outer plate to repair the right-hand door.

For VW Transporter T4, 09/1990 ->06/2003
All models with swing doors.

Front for Mini :
Mini R55 Clubman:
- Cooper 1.6L 120hp from 10/2006 to 07/2010 (engine code N12B16)- One 1.4L 95hp from 08/2008 to 02/2010 (engine code N12B14)- Cooper 1.6L 122hp from 03/2009 to 08/2010 (engine code N16B16)- One 1.6L 98hp from 03/2009 to 08/2010 (engine code N16B16)
Warning! Not suitable for other engines , including diesel.

Front mounting spacer for Mazda MX-5 NB NBFL

This spacer is placed in the middle and between the two parts (lower and upper) of the front engine bulkhead and takes the bonnet latch

Original MAZDA part

For Mercedes C Class Type W202 Saloon and Type S202 Estate