Front & rear panel

Jupe avant extérieure de réparation en tôle pour VW Combi Split Brésilien de 1957 à 1975.
Modèle hauteur 18 cm.
Pièce de tôlerie de qualité supérieure.

Front upper skirt for a sheet metal repair.
This model includes the "nose" and a height up to half the headlights.
Height: 350 mm
Thickness: 1 mm

Superior quality sheet metal part

For VW Split Bus T1, Bully
Years: 1950 ->07/1967

WARNING: not suitable for Audi S6 and Quattro

Right headlight mounting surround,
for Mercedes C Class Type W202 Saloon and Type S202 Estate

For Audi 80 09/91->07/95

WARNING: not suitable for Audi S6 and Quattro

Interior front crossmember reinforcement under front end panel nose.

For VW Kombi Bay Windows,
Years: 08/1972 -> 07/1979

Quality part, referred to as adaptable" as it is not provided by the vehicle manufacturer"

Sheet metal panel for bottom of the boot of the front compartment.
This sheet metal panel is flat and runs from below the front apron to the fuel tank.
Sheet metal to be welded, this work should be done by a professional.
For VW Beetle since 1958. (not suitable for 1302 & 1303)

Front upper skirt for a sheet metal repair.
This model includes the "nose".
Height: 200 mm
Thickness: 1 mm

Superior quality sheet metal part

For VW Split Bus T1, Bully
Years: 1950 ->07/1967

NOTE: not suitable for Avant (Estate)

This rear panel crossmember for Renault 4 (10/1961-01/1994) is of superior quality to the original.
Specific to sedans, this rear panel underbody for Renault 4 is located under the trunk edge. Made in Europe from electro-galvanized sheet steel, it offers superior corrosion resistance to the original sheet.
Not compatible with F4 and F6 vans.

WARNING: not suitable for Audi S6 and Quattro

Front frame to which the radiator is attached,

For Ibiza (6L):
- All Petrol models without air conditioning

This rear skirt for Renault 4L (10/1961-01/1994) is actually higher quality than the original.

This 4L rear skirtis made in Europe and has higher corrosion resistance compared to the original metal panelling thanks to the use of electro-galvanised steel.

Suitable for all E39 Saloon and Touring models (including M5)

Front panel for Volkswagen Golf 5 GTI, R32 and GT, GT-SPORT trim levels:

- GTI 2.0 TFSI 200hp from 09/2004 to 06/2008 (engine code AXX)
- GTI 2.0 TFSI 200hp from 09/2004 to 06/2008 (engine code BPY)
- GTI 2.0 TFSI 200hp from 09/2004 to 06/2008 (engine code BWA)
- GTI 2.0 TFSI 200hp from 09/2004 to 06/2008 (engine code CAWB)
- GTI 2.0 TFSI 200hp from 09/2004 to 06/2008 (engine code CBFA)
- GTI 2.0 TFSI 200hp from 09/2004 to 06/2008 (engine code CCTA)
- GTI 2.0 TFSI 230hp from 11/2006 to 06/2008 (BYD engine code)
- R32 3.2L FSI V6 4Motion 250hp from 08/2005 to 06/2008 (BDB engine code)
- R32 3.2L FSI V6 4Motion 250hp from 08/2005 to 06/2008 (engine code BMJ)
- R32 3.2L FSI V6 4Motion 250hp from 08/2005 to 06/2008 (engine code BUB)
- R32 3.2L FSI V6 4Motion 250hp from 08/2005 to 06/2008 (engine code CBRA)
- 1.4L TSI 140hp from 07/2007 to 11/2008 (engine code BMY) --> GT-SPORT finish
- 1.4L TSI 170hp from 11/2005 to 06/2007 (engine code BLG) --> GT finish
- 1.4L TSI 170hp from 07/2007 to 11/2008 (engine code BLG) --> GT-SPORT trim level
- 1.9L TDI 105hp from 07/2007 to 11/2008 (engine code BXE) --> GT-SPORT finish
- 1.9L TDI 4Motion 105hp from 07/2007 to 11/2008 (engine code BXE) --> GT-SPORT finish
- 1.9L TDI 105hp from 07/2007 to 11/2008 (engine code BKC) --> GT-SPORT finish
- 1.9L TDI 4Motion 105hp from 07/2007 to 11/2008 (engine code BKC) --> GT-SPORT finish
- 1.9L TDI 105hp from 07/2007 to 10/2008 (engine code BLS) --> GT-SPORT finish
- 1.9L TDI 4Motion 105hp from 07/2007 to 10/2008 (engine code BLS) --> GT-SPORT finish
- 2.0L TDI 140hp from 07/2007 to 10/2008 (BKD engine code) --> GT-SPORT finish
- 2.0L TDI 4Motion 140hp from 07/2007 to 10/2008 (engine code BKD) --> GT-SPORT finish
- 2.0L TDI 140hp from 07/2007 to 10/2008 (engine code BMM) --> GT-SPORT finish
- 2.0L TDI 4Motion 140hp from 07/2007 to 10/2008 (engine code BMM) --> GT-SPORT finish
- 2.0L TDI 170hp from 05/2006 to 06/2007 (engine code BMN) --> GT finish
- 2.0L TDI 170hp from 07/2007 to 11/2008 (engine code BMN) --> GT-SPORT finish

ATTENTION: Not suitable for Volkswagen Golf 5 Plus!

This part is "adaptable" because it does not come from the manufacturer.

Suitable for all Audi A4 models without air conditioning but with 4-cylinder Petrol engine and manual gearbox

This quality lower front valance located under the bumper is compatible for BMW 5 series E28 diesel phase 2 from 09/1984:
- 524d 6cyl 84hp from 05/1986 to 12/1987 (engine code M21D24)- 524td 6cyl 115hp from 09/1984 to 12/1987 (engine code M21D24T)
WARNING: Not suitable for petrol version or M-Technic!
Over the course of its life, the front end of your BMW usually suffers from rust, impacts and various shocks.
The front valance is supplied bare, with black storage paint. It will need to be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.
This metal front body panel is called "adaptable" because it does not come from the manufacturer.

Outer plate to repair the rear left-hand door.

For VW Transporter T4, 09/1990 ->06/2003
All models with swing doors.