Coupling and portage

7 pin female base. To be fastened to the car.
Black plastic.
Screw connection.
Voltage : 12V.

This 5-meter extension cord is ideal for connecting caravans or trailers to the vehicles towing them.

Length: 5 meters.
2-conductor extension lead (section 1.5mm²).
Connection: 7 studs.
Black plastic.
Voltage: 12V.

Roadloisirs has selected for you a BOISNIER trailer hitch with a gooseneck ball joint that can be removed with tools. Perfect if you want to equip your oldtimer at the best price.

For MAZDA 121 (Type JASM, JBSM) Sedan with hatchback
Dates of manufacture: From 03/1996 to 04/2003

Hitch specifications :

- Maximum towable load: 900 kg
- Maximum weight on ball joint: 50 kg
- Average assembly time: 90 min
- Weight: 14.51 kg
- Bumper removal: No
- Chassis drilling : Yes
- Bumper cut-out: Non-visible cut-out

Made in France,
Ball removal with tools,
Fittings and socket remain visible in front of your bumper.
Delivered complete with hook, fittings, mounting kit with screws and bolts, plug holder and mounting instructions.

Tow hook for caravan, trailer or bike carrier.Quality product complete with tow ball and fixing bolts.Does not include wiring harness.Product designed for VW Combi Bay Window T2B from 08/1972 to 07/1979 and compatible with the maximum towing weight 1200kg for a vehicle equipped with a Type 1 engine and 1800kg with a Type 4.The maximum vertical hitch weight is 75kg.Please check vehicle documents for towable weight.TUV-certified trailer hitch.
Only for models with original exhaust system.Does not fit with USA specific exhaust.

Protect the towbars of your trailers and caravans from frost, snow, rain and wind! With the Hindermann cover, you'll keep your hitch heads and drawbar in good condition for a long time to come.
Its pocket shape makes it easy to assemble.
Attractive braid finish.
Supplied with a rubber turnbuckle for better fastening.
Color: silver.

Ref Hindermann 8012-4450SB

Soft Ball universal red ball cover.
Made from rubber.
Colour: red
UV resistant.
Universal installation.
Compatible with 50 mm diameter balls.

Al-Ko: 247095

Roadloisirs has selected for you, a trailer hitch from the WESTFALIA brand with a standard removable ball joint with tools.

For CITROËN towable: 1500 kg
- Maximum weight on the ball joint: 85 kg
- Average assembly time: 120 min
- Weight: 22 kg
- Removal of the bumper: No
- Cutting the bumper: No

European manufacturing,
Removal of the ball with tools on a 2-hole plate,
The fittings and the socket support remain visible in front of your bumper.
Supplied complete with the hook, the fittings, the mounting kit with screws, the socket support and the assembly instructions.

Tonneau cover hook for VW Combi Bay Window from 08/1967 to 07/1979.

Tipper cover hook for VW Combi Split from 08/1952 to 07/1967.

Tow hook for caravan, trailer or bike carrier.
Quality product complete with wiring harness, tow ball and mounting bolts.
Designed for VW Combi Bay Window T2A and compatible with maximum towing weight.
TUV-certified trailer hitch.

Only for models with original exhaust system.
Does not fit with USA specific exhaust

Towing tool for Beetle 1200, 1300, 1500, Buggy, 181.Special model for front axle shortened by 2 inches (+/- 5 cm).Attaches to the lower tube of the front axle (with pivots or ball joints). Easy assembly.
Distance between mountings: 616 mm.
Not approved for road use.

For TowBox V3;
Set of stops that prevent the TowBox from touching the ground in the "tilt" position when the height of the car is too low.

Black universal Soft Ball cover.
Made of rubber.
Color: black.
U.V. resistant.
Universal mounting.
Compatible with 50 mm diameter ball joints.

Plastic black towball cover.

Towing tool for Beetle 1302, 1303 with sprung front axle (MacPherson). Easy to assemble.
2-piece model: the bar is attached to the chassis nose using existing fixing points (screws not supplied), the tongue is attached to the connecting bar using pins and cotter pins (supplied).

Not approved for road use.

This straight, screw-on hitch ball is ideal if you need to replace your worn ball joint.

This part is only suitable for hitches, drawbars of caravans, trailers and/or farm machinery which have a slot for this accessory.

Easy to install and ready to use. Suitable for all your daily needs.

Mecatechnic has selected for you, a trailer hitch with an angled ball joint that can be removed with tools. Perfect, if you want to fit out your vintage car at the best price.

For BMW 5 SERIES (type E34)
Production dates: from 1988 to 1997

Except M5

Towbar specifications:

- Maximum towable load: 1500 kg
- Maximum weight on the tow ball: 50 kg
- Average assembly time: 200 min
- Weight: 15.91 kg
- Bumper removal: yes
- Chassis drilling: Yes
- Bumper cut-out: visible cut-out

Made in France,
Ball joint fixed on a 2-hole plate. This allows you to install a combination hook,
Tools required to remove the ball.
The fittings and the socket holder remain visible under your bumper.
Delivered complete with hook, fittings, mounting kit with screws and bolts, socket holder and assembly instructions.

The Boisnier hitch for Volkswagen Transporter T4 with a tool-removable angled head is perfect, if you want a multipurpose accessory for your work sites, jobs and your daily.

For VW Transporter T4 van (type 70 and 7D) including California, Caravelle, Multivan and 4Motion
Manufacturing dates: From 09/1990 to 06/2003

Except for T4 chassis cab, dump and/or rear-wheel drive

ALKO coupler head cover for AKS1300 AKS2004 & AKS3004
For trailers and caravans.
Protects coupler heads from wind and rain.
- Storm-resistant.
- Colour: black
- Suitable for ALKO AKS1300 AKS2004 & AKS3004 coupler heads only.

Thecover is suitable for stabilizers of hitch head ALKO AKS1300 AKS2004 mounted for towing caravans and trailers. It provides protection against rain and wind.

Thewaterproofhigh quality anti-fouling coating protects against UV rays, corrosion, dirt and wear.

Features:
- Weather resistant material.
- Composition: polyester.
- Color: black.
- Fits only ALKO AKS1300 hitch heads