Coupling and portage

Mecatechnic has selected for you a harnesswith a 7-pin plug. This allows you to connect your trailer, bike carrierand/or caravan to your vehicle in accordance with your manufacturer's recommendations.

For AUDI A6 C5 (type 4B5) Estate without Check-control (this system allows the on-board computer to tell you if you have a broken bulb)
Production dates: from 1998 to 2005

Except A6 Saloon (type 4B2)

Wiring characteristics:

- Rear connection
- Installation inside boot mandatory: no
- Disabling of reversing system: No
- Average assembly time: 90 minutes

Tow hitch for caravan, trailer or bike carrier.
Complete quality product with electrical harness, towball and mounting bolts.
Product designed for VW T2 Bay Window Bus and compatible with the maximum tow weight.
EU certified tow bar with manufacturer's sticker specifying the identification and E11 certification.

Caution: please note that this tow bar is designed for:

- VW Bay Window Bus
Years: 08/1971 ->07/1972
Chassis: 212 2000 001 ->212 2300 000
Only for models with low front indicators, more recent rear lights, fixed rear skirt and original exhaust.

Hitch with a standard ball joint that can be removed with tools. Delivered complete with standard ball joint, fittings, socket holder, mounting kit with screws and 7-pin universal harness.

For VW T3/T25 with plastic bumpers and original exhausts
Models: 1989 to 1992

Except T3/T25 with steel bumpers, motorhome and 4x4.

- Maximum load that can be towed by the vehicle: 2000 Kg
- Max. permissible weight on the tow ball: 50 kg
- Towbar assembly time: 90 min.
- Hitch weight : 16.00 kg
- Bumper removal necessary: yes
- Bumper cut-out necessary: visible cut-out

Standard ball joint fixed on a 2-hole plate,
The ball joint and socket holder remain visible under the bumper.

Mecatechnic has selected for you a specific harnesswith a 13-pin plug. This allows you to connect your trailer, bike carrierand/or caravan to your vehicle in accordance with your manufacturer's recommendations.

For BMW X5 (type E53) with towbar preparation. You have a connector waiting in your trunk
Production dates: from 07/1999 to 09/2006

Except cars without the connector in the trunk

Wiring characteristics:

- Rear connection
- Installation inside boot mandatory: no
- Disabling of reversing system: yes
- Beam kit (12V power supply from your caravan): Yes
- Average assembly time: 90 minutes

Mecatechnic has selected special hitch wiring with a 7-pin plug for you. This enables you to attach your trailer, bike rack and/or caravan to your vehicle in accordance with your manufacturer's recommendations.

For VW GOLF6 (type 5K1) Saloon, (type 5M_) Plus, (type AJ5) Estate Variant and Convertible
Production dates: From 2008 to 2013

Wiring specs:

- Rear and front connection
- Compulsory to use car diagnostic scanner: Yes
- Turns off reversing sensors: Yes
- Average assembly time: 90 minutes

Mecatechnic has selected special hitch wiring with a 7-pin plug for you. This enables you to attach your trailer, bike rack and/or caravan to your vehicle in accordance with your manufacturer's recommendations.

For SEAT LEON (type 5P1)
Dates of manufacture: From 2005 to 2012

Wiring specs:

- Rear and front connection
- Compulsory baggage check: No
- Turns off reversing sensors: Yes if you use a car diagnostic scanner
- Average assembly time: 90 minutes

Mecatechnic has selected for you a specific harnesswith a 13-pin plug. This allows you to connect your trailer, bike carrierand/or caravan to your vehicle in accordance with your manufacturer's recommendations.

For AUDI A4 B6 (Type 8E2) Saloon, (Type 8E5) Estate Avant and (Type 8E7) Convertible
Production dates: from 2001 to 2004

Wiring characteristics:

- Rear and front connections
- Installation inside boot mandatory: no
- Disabling of reversing system: yes
- Beam kit (12V power supply from your caravan): No
- Average assembly time: 90 minutes

Mecatechnic has selected special hitch wiring with a 7-pin plug for you. This enables you to attach your trailer, bike rack and/or caravan to your vehicle in accordance with your manufacturer's recommendations.

For VW Transporter T6 Van phase 2 without towbar prep (code PR-1D0) including California, Caravelle and Multivan
Production dates: from 04/2015.

Wiring specs:

- Front connection
- Compulsory to use car diagnostic scanner: Yes
- Turns off PDC (parking assistance): Yes
- Average assembly time: 90 minutes

Heavy tow hitch for trailer or caravan.
With TÜV certification papers for Europe.

For VW T1 Split Bus

Heavy towing hook for trailer or caravan up to 800 kg! Designed for Beetle with small or large bumpers, rear axle with trumpets or universal joints. Removable ball.
CE approved hitch, delivered with its certificate.

For VW Beetle Sedan and Cabriolet
Models: 1200, 1300, 1500, 1302, 1303
Also mounts on models before 68 with fine fittings with slight modification of the hitch support.
For versions with "square bumpers" (cox after 68 except 1200): it is necessary to shorten the transverse reinforcement bar joining the bumper fittings.


Heavy hitch fixed at 6 points: on the torsion bars, on the chassis horns and on the rear bumper fittings.
Sold without plug or electrical harness.

Mecatechnic has selected special hitch wiring with a 7-pin plug for you. This enables you to attach your trailer, bike rack and/or caravan to your vehicle in accordance with your manufacturer's recommendations.

For VOLKSWAGEN POLO (model 6N1) including POLO Classic (model 6V2)
Dates of manufacture: From 10/1994 to 09/1999

Except Variant break

Wiring specs:

- Rear connection
- Compulsory to use car diagnostic scanner: No
- Deactivates reversing sensors: No
- Average assembly time: 30 minutes

Mecatechnic has selected for you a harnesswith a 7-pin plug. This allows you to connect your trailer, bike carrierand/or caravan to your vehicle in accordance with your manufacturer's recommendations.

For AUDI A6 C5 (type 4B2) Saloon without Check-control (this system allows the on-board computer to tell you if you have a broken bulb)
Production dates: from 1998 to 2005

Except A6 Estate Avant (model 4B5)

Wiring characteristics:

- Rear connection
- Installation inside boot mandatory: no
- Disabling of reversing system: No
- Average assembly time: 90 minutes