Logo

Fastening clip for monograms and bodywork emblems with round fastening studs.

Technical specifications:
- Inside diameter: 3mm

Front logo retainingclip for VW Combi Bay Window from 08/1967 to 07/1972 fitted with metal stamped VW badges.
Front logo retaining clips are small elements used to secure badges to the vehicle body. These clips hold the badge firmly in place, while guaranteeing a discreet, aesthetically pleasing attachment.
The clips hold the sign in place to prevent it from becoming detached or lost on the road, even in the event of vibrations caused by driving. If the retaining clips are damaged or missing, a number of problems can arise: the sign can start to detach or swing, which can be aesthetically unpleasant.A defective clip can cause the sign to fall off, particularly when driving at higher speeds or on rough roads.
This plastic rivet is also suitable for Transporter T25 (mudflap attachment). We advise you to check the type of clip fitted to your model and the quantity required before ordering.
This product is sold individually.

Front bonnet emblem speed nut for all Porsche

This clip allows the fixing and tightening of the Porsche logo. It is identical and can be used on all Porsches and badge generations.

These rivets are therefore suitable for all models with the perforated hood, because some Porsche have a self-adhesive shield.

Quantity needed : 2

Sold individually

Bmw 7 Series E38 front hoodemblem clip :

- Compatible with all Bmw 7 Series E38 versions from 07/1993 to 07/2001.

Quantity required per vehicle: 2

This clip sleeve is used to attach the original BMW logo to the front hood.

This product is sold individually.

Flat design front hoodemblem clip diameter 82mm for BMW.

Quantity required per vehicle: 4

This clip allows you to attach the original BMW logo to the front hood and trunk.

This product is sold individually.

This nylon nipple will fit on the trunk of your Citroën DS and allow you to attach the chevrons or monogram.

This genuine PORSCHE logo is suitable for all Porsche Boxster 986 :

- 986 2.5 Boxster - 204 hp (M96.20) from 1997 to 1999
- 986 2.7 Boxster - 220 hp (M96.22) from 2000 to 2002
- 986 2.7 Boxster - 228 hp (M96.23) from 2003 to 2004
- 986 3.2 Boxster S - 252 hp (M96.21) from 2000 to 2002
- 986 3.2 Boxster S - 260 hp (M96.24) from 2003 to 2004
- 986 3.2 Boxster S550 - 266 hp (M96.24) from 2003 to 2004

Flat design front hood emblem with BMW logo diameter 82mm for BMW X3 E83 and LCI :

- Compatible with phase 1 and phase 2 LCI version

Original BMW part.
2 fixing points on the back (clips not supplied).

This BMW hood plate is not a reproduction, it is an official BMW quality part from the manufacturer.

Flat design front hood emblem with BMW logo for Bmw 7 Series E38 :

- Compatible with all Bmw 7 Series E38 versions from 07/1993 to 07/2001.

Original BMW part.
2 fixing points on the back (clips not supplied).

This BMW hood plate is not a reproduction, it is an official BMW quality part from the manufacturer.

Rear "Transporter" badge for VW Transporter T25 from 08/1983 to 07/1992 from chassis no. 24-E-000001.

VW" black radiator grille 125 mm diameter for VW Transporter T25 / T3, Caravelle from 08/1987 to 07/1992 from chassis n° 24-J-014 530.Original Volkswagen Classic Parts.

Chrome-plated "VW VOLKSWAGEN" sign on rear panel for VW Transporter T25 from 05/1979 to 07/1992.Original Volkswagen Classic Parts

Genuine Mazda front bumper badge for Mazda MX5 NBFL from 2001 to 2005:

- NBFL 1.6 110hp from 2001 to 2005
- NBFL 1.8 146hp from 2001 to 2005

This badge is attached to with reference MX14801.

VW VOLKSWAGEN" sign for rear panel of VW Transporter T25 / T3 since 08/1983.Fits all types of Transporter T25 / T3Dimensions: 317 x 54 mm, black finishOfficial VW Classic Parts reproduction

Self-adhesive tailgate emblem.
Stainless steel 'AIRCOOLED' lettering.

GTI logosilver on black background of front wing right and left for Volkswagen Golf 2 and Jetta 2 GTI:

- All models from 08/1983 to 07/1992

Thislogois to clip into the opening of the side turn signal repeater front.

INFORMATION: This logo was present on the front fenders of models sold on certain markets. foreign (Netherlands etc.).

Technical characteristics:
- Dimensions: 63mm x 44mm
- Finish: chrome
- Back : black
- Original reference: 191853688J GX2

Quantity: required per vehicle: 2

This product is sold at the unit.

Original Volkswagen Classic Parts part.

Sigle EMPI ovale moulé en métal noir et chrome pour VW Combi Split Brésilien de 1957 à 1975.
Dimensions : 56 x 39 x 2 mm
Fixation par double-face fourni.

This monogram clip is designed for Citroën ID logos and emblems with a 4mm tip.
Please check the diameter of the logo tip before ordering the clip.
Compatible with all Citroën ID models.

Self-adhesive bodywork emblem on tailgate.
STREETMACHINE" monogram inscription.