Logo

MX-5 logo for:
- MX-5 NC and NCFL

Original MAZDA part.

Original BMW part
Flat design

"MX-5" chrome-plated logo in black letters for Mazda NB and NBFL

Located on the left-hand side of the back panel

Original Mazda part

Bodywork logo fitting clip for Mazda MX-5 NA.

Enables you to easily attach the bodywork logos on the front bumper, rear boot, etc.

Genuine Mazda part
Sold individually

Bodywork logo fitting clip for Mazda MX-5 NB and NBFL.

Enables you to easily attach the bodywork logos on the front bumper, rear boot, etc.

Genuine Mazda part
Sold individually

Rear Mazda logo for MX-5 NB and NBFL

Located in the centre of the boot

Original MAZDA part

Speedster front fender emblem for Porsche 356A from 1956 to 1959 :

- 356 A 1300 - 44 hp (506/1) from 1956 to 1957
- 356 A 1300 S - 60 hp (589/2) from 1956 to 1957
- 356 A 1600 - 60 hp (616/1) from 1956 to 1959
- 356 A 1600 S - 75 hp (616/2) from 1956 to 1959

The emblem is sold individually , and two quantities are required per vehicle.

MAZDA front logo for Mazda MX5 NCFL from 2008 to 2014.

Genuine MAZDA part.

Embase chromée de sigle VW en relief sur le nez avant.
Vendue nu sans sigle ni joint.

Pour VW Karmann-Ghia type 14 ou type 34
Années : 08/1962 ->07/1974

Insigne "Karmann Ghia" sur capot moteur

Pour VW Karmann-Ghia :
- Type 14, 08/1962 ->07/1974
Châssis : depuis N° 4 846 836->
- Type 34, 09/1961 ->07/1969

Interior "Karmann Ghia" badge on the dashboard.

For VW Karmann-Ghia:
- Type 14, 08/1966 -> 07/1974
Chassis: from no. 147 000 001 ->
- Type 34, 08/1966 -> 07/1969
Chassis: from no. 347 000 001 ->

Front sign-holding clips are small elements used to secure signs to the vehicle body. The clips hold the sign securely in place, while guaranteeing a discreet, aesthetically pleasing fit.
The clips hold the sign in place to prevent it from becoming detached or lost while driving, even in the event of driving vibrations. If the retaining clips are damaged or missing, a number of problems can arise: the sign may start to come loose or swing about, which can be aesthetically unpleasant.A defective clip can cause the sign to fall off, particularly when driving at higher speeds or on rough roads.
Clip sold individually, you need 3 clips to attach the 18 cm sign to the front panel.Suitable for VW Combi Bay Window from 08/1972 to 07/1979 since chassis no. 213 2000 001.

This monogram on rear trunk for Citroën DS 21 (1966-1975) - 4 pieces is an excellent quality reproduction.

This trunk logo for DS 21 is a faithful reproduction in polished brass.

Compatible models:

- DS21 Sedan type DS21-DX, hydraulic DS21 from 1966 to 1968, Type DX engine 2175cc (109hp), 4-speed hydraulic gearbox
- DS21 Cabriolet type DS21-DX, hydraulic DS21 from 1966 to 1968, Type DX engine 2175cc (109hp), 4-speed hydraulic gearbox
- DS21 Sedan type DS21-DX, hydraulic DS21 from 1969 to 1972, Engine Type DX2 2175cc (115hp), 4-speed hydraulic gearbox
- DS21 Cabriolet type DS21-DX, hydraulic DS21 from 1969 to 1972, Engine Type DX2 2175cc (115hp), 4-speed hydraulic gearbox
- DS21 Sedan type DS21-DX, DS21 automatic from 1972, Engine Type DX2 2175cc (115hp), 3-speed hydraulic gearbox
- DS Serie FA Sedan type DS21-DX, DS21 ie hydraulic from 1970 to 1972, Engine Type DX3 2175cc (139hp), 4-speed hydraulic gearbox
- DS Serie FA Sedan type DS21-DX, DS21 ie automatic from 1972, Engine Type DX3 2175cc (139hp), 3-speed automatic gearbox
- DS21 Serie M Sedan type DS21-DJ, DS21 mechanical from 1966 to 1968, Engine Type DX 2175cc (109hp), 4-speed manual gearbox
- DS21 Série M Cabriolet type DS21-DJ, DS21 mechanical from 1966 to 1968, Engine Type DX 2175cc (109hp), 4-speed manual gearbox
- DS21 Serie M Sedan type DS21-DJ, mechanical DS21 from 1969 to 1970, Engine Type DX2 2175cc (115hp), 4-speed manual gearbox
- DS21 M Series Sedan type DS21-DJ, mechanical DS21 from 1971 to 1972, Engine Type DX2 2175cc (115hp), 5-speed manual gearbox
- DS Serie FB Sedan type DS21-DJ, DS21 ie mechanical from 1970, Engine Type DX3 2175cc (139hp), 4-speed manual gearbox
- DS Série FB Cabriolet type DS21-DJ, DS21 ie mechanical 1970, Engine Type DX3 2175cc (139hp), 4-speed manual gearbox
- DS Série FB Sedan type DS21-DJ, DS21 ie mechanical from 1971 to 1972, Engine Type DX3 2175cc (139hp), 5-speed manual gearbox
- DS21M Sedan type DS21M-DP, DSuper5 from 1973 to 1975, Engine Type DX2 2175cc (115hp), 5-speed manual gearbox

These Chromed chevrons on rear trunk for Citroën DS (1956/1975) are of very good quality.
This DS rear trunk emblem is a faithful reproduction of the original chevrons. In chromed metal, they will restore all the original prestige to the rear face of DS sedans.
Compatible models:All DS sedan models.

This monogram clip is designed for Citroën DS logos and emblems with a 4mm tip.
Please check the diameter of the logo tip before ordering the clip.
Compatible with all Citroën DS models.

This nylon nipple will fit on the trunk of your Citroën ID and allow you to attach the chevrons or monogram.

JETTA GL satin chrome emblem on black background for rear panel of Volkswagen JETTA 2 GL phase 2 finish produced from 08/1987 to 07/1992.

Technical specifications:
- Dimensions: 240mm x 23mm
- 3 mounting points
- Finish: satin chrome
- Background: black

This sign is clipped onto the bodywork.

Original Volkswagen Classic Parts.

Golf GTD chrome adhesive emblem on black background for rear panel of Volkswagen Golf 3:

- GTD 1.9L TD 75hp from 11/1991 to 08/1997 (engine code AAZ)

Technical specifications:
- Dimensions: 183mm x 22mm x 4mm
- Fixing: double-sided adhesive
- Finish: chrome
- Base: black
- Original reference : 1H6853687AEZ10

This logo is to be stuck on the back right side.

Golf GLX adhesive chrome emblem on black background for Volkswagen Golf 3 rear panel:

- Models with GLX finish produced in 1995 (bottom right of rear panel)

Technical specifications:
- Length: 200mm
- Height: 33mm
- Thickness: 4mm
- Finish: chrome-plated
- Fixing: double-sided adhesive
- Original part number : 1H6853687AKGX2

This sign is to be stuck on the bodywork.

Original Volkswagen Classic Parts.