Suspension ball joints

Right or left upper suspension ball joint for Renault 16.

Compatible with Renault 16:
- R16 TS: 1.6L (807) type R1151 up to chassis no.24716
- R16 TL: 1.6L (821) type R1152 up to chassis no.2401

Locking pin no. 87 for Mazda MX-5 NC and NCFL

For NC and NCFL all models


Used to lock the castle nut on the suspension ball joint joints

Sold individually
Genuine Mazda part

Front lower suspension ball joint for Mercedes SL

For Mercedes SL R107 and SLC Coupé C107 all models

This front wishbone ball joint is located on the lower left or right wishbone on the wheel side.

Sold individually

Suitable for Seat Ibiza 6K

This rubber bellows for lower and upper ball joints replaces the original leather bellows on your Citroën Traction 11 CV.
The switch to rubber bellows offers greater material elasticity, reducing the risk of damage to the front axle ball joints.
Dimensions: 76 x 20 x 22 mm

Front suspensionball joint for Renault Clio II: Renault Clio II : - 1.2i from 09/1998 to 02/2010 (1149 ccm 58hp)
- 1.2i LPG from 09/1998 to 06/2009 (1149 ccm 58hp)
- 1.2i from 03/1999 to 05/2001 (1149 ccm 60hp)
- 1.5 dCi from 06/2001 until 12/2006 (1461 ccm 57hp)
- 1.5 dCi from 01/2004 to 04/2005 (1461 ccm 100hp)
- 1.5 dCi from 08/2004 to 12/2012 (1461 ccm 68hp)
- 1.5 dCi from 06/2001 until 10/2003 (1461 ccm 80hp)
- 1.5 dCi from 06/2001 until 07/2009 (1461 ccm 65hp)
- 1.5 dCi from 06/2001 until 04/2005 (1461 ccm 82hp)
- 1.5 dCi from 06/2005 to 12/2010 (1461 ccm 64hp)
- 1.5 dCi from 02/2007 to 06/2009 (1461 ccm 84hp)
- 1.9 D from 09/1998 to 05/2005 (1870 ccm 64hp)
Please note! There are 2 models depending on the diameter of the ball joint head.

For Golf 5 all models

For VOLKSWAGEN Transporter T5 for laden weight of 3.2T
MEYLE HD model, reinforced compared with the original.

Left or right, sold individually.

For Golf 6 all models

Suitable for Golf 3 GTi & VR6 (5x 100)

Upper suspension ball joint on front axle.
Mounts on the left or right side. Sold individually.

For VW LT with front axle with helical (spiral) springs.

For Audi 80 from 92 ->96
from chassis 8C-N-000 352 ->8C-N-175 591:
- All except 2.8 V6 174hp (AAH)

For Audi 80 Quattro up to chassis ->8C-R-125 000
- All except 2.2 20V (ABY) and RS2

For Audi Coupé from 89 ->96
from chassis 8B-N-000 256 ->8B-N-009 191:
- All except 2.8 V6 174hp (AAH)

For Audi Coupé Quattro:
- 2.2 20V (ABY) from chassis 8B-N-000 001 ->8B-R-005 000
- 2.2 20V (3B) up to chassis ->8B-M-040 000

For Audi Cabriolet from89 ->00:
- 1.6 (ADP)
- 1.8 (ADR)
- 1.9 TDi 90hp (1Z, AHU)
- 2.0 (ABK, ACE) from chassis 8G-N-001 534->
- 2.3 (NG) from chassis 8G-N-001 534->
- 2.6 V6 150hp (ABC, ACZ) from chassis 8G-R-003 925->
- 2.8 V6 174hp (AAH) from chassis 8G-R-003 925->

FEBI upper control arm ball joint left or right for BMW X3 E83:

- Compatible only with phase 1 models:

- 2.0i 4cyl 150hp from 05/2003 to 07/2006 (engine code N46B20)
- 2.5i 6cyl 192hp from 02/2003 to 07/2006 (engine code M54B25)
- 3.0i 6cyl 231hp from 01/2003 to 07/2006 (engine code M54B30)
- 2.0d 4cyl 150hp from 05/2003 to 07/2006 (engine code M47D20TU)
- 3.0d 6cyl 204hp from 01/2003 to 08/2005 (engine code M57D30TU)
- 3.0d 6cyl 218hp from 03/2005 to 07/2006 (engine code M57D30TU)

ATTENTION! there are 2 different assemblies between the phase 1 and phase 2 models.

This product is sold individually.

Complete set of suspension wishbones with steering knuckles for front axle rebuilding in VAICO quality for VW LT from 1996 to 2006, all versions from LT28 to LT46, with or without motorhome.

TOPRAN suspension ball joint for Porsche 944 from 1982 to 1985 :
- 944 phase 1 - 2.5 - 163hp (M44.01 to 04) from 1982 to 1985
The ball joint is sold individually , and two quantities are required per vehicle.

For A3 (8P) including Quattro version
Not suitable for S3 Quattro 256hp and 265hp (BZC, BHZ)

Mazda RX-8 suspension ball joint pin

For RX-8 all models from 2003 to 2012

Used to lock the upper suspension ball joint nut

Sold individually
Genuine Mazda part

M12 x 1.5 right suspension ball joint, comes with stopper and 3 screws.

Compatible with Skoda Octavia type 1U, all models including 4WD

FEBI left suspension ball joint on inside suspension arm for MINI II R50, R53 Sedan and R52 Convertible:

R50 Sedan :
- Cooper 1.6L 116hp from 09/2000 to 11/2006 (engine code W10B16)
- One 1.6L 90hp from 09/2000 to 11/2006 (engine code W10B16)
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

R52 Cabriolet :
- Cooper 1.6L 116hp from 11/2002 to 07/2008 (engine code W10B16)
- Cooper S manu. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2008 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2008 (engine code W11B16)
- One 1.6L 90hp from 01/2003 to 07/2008 (engine code W10B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 10/2000 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 09/2006 (engine code W11B16)

Supplied with tightening nut.

Dimensions :
- M14 x 1.5 external thread

This ball-and-socket joint is located on the front left of the driver's side.

For all E36 models except M3