Suspension ball joints

Upper ball joint with bearing and shims, for Citroën traction 11cv.
Dimension: 52mm
Compatible models:- Traction Avant 11A Berline 4 portes 11CV, type 11A de 11/1934 à 02/1937, Moteur, type 11cv 1911cc (46cv)- Traction Avant 11A Faux-Cabriolet (Coupé) 11HP, type 11A from 11/1934 to 02/1937, Engine, type 11hp 1911cc (46hp)- Traction Avant 11A Roadster (convertible) 11HP, type 11A from 11/1934 to 02/1937, Engine, type 11hp 1911cc (46hp)- Traction Avant 11A Conduite intérieure 11CV rallongée, type 11A de 11/1934 à 02/1937, Moteur, type 11cv 1911cc (46cv)- Traction Avant 11A Familiale 11CV extended, type 11A from 11/1934 to 02/1937, Engine, type 11cv 1911cc (46cv)- Traction Avant 11A coupé de ville 11CV rallongée, type 11A de 11/1934 à 02/1937, Moteur, type 11cv 1911cc (46cv)- Traction Avant 11A Commercial 11CV extended, type 11A from 11/1934 to 02/1937, Engine, type 11cv 1911cc (46cv)- Traction Avant 11B Berline 4 portes 11CV, type 11B de 02/1937 à 02/1939, Moteur, type 11cv 1911cc (46cv)- Traction Avant 11B Faux-Cabriolet (Coupé) 11HP, type 11B from 02/1937 to 02/1938, Engine, type 11hp 1911cc (46hp)- Traction Avant 11B Roadster (Cabriolet) 11HP, type 11B from 02/1937 to 02/1939, Engine, type 11hp 1911cc (46hp)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 02/1939 à 1941, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 02/1939 à 1941, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 02/1945 à 01/1955, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 02/1945 à 01/1955, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11C Commercial 11 "Performance", type 11B from 03/1954 to 1957, Engine, type 11cv D 1911cc (59hp)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 02/1955 à 02/1956, Moteur, type 11cv D 1911cc (59cv)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 02/1955 à 07/1957, Moteur, type 11cv D 1911cc (59cv)

Lower suspension ball joint for Renault Clio 1 from 1990 to 1997. The ball joint comes with the screws

For right or left-hand side.

Compatible with Clio I:
- All models

Suspension ball jointleft or right on outer pivot bearing for MINI II R50, R53 Sedan and R52 Convertible:

R50 Sedan :
- Cooper 1.6L 116hp from 09/2000 to 11/2006 (engine code W10B16)
- One 1.6L 90hp from 09/2000 to 11/2006 (engine code W10B16)
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

R52 Cabriolet :
- Cooper 1.6L 116hp from 11/2002 to 07/2008 (engine code W10B16)
- Cooper S manu. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2008 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2008 (engine code W11B16)
- One 1.6L 90hp from 01/2003 to 07/2008 (engine code W10B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 10/2000 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 09/2006 (engine code W11B16)

Dimensions :
- M12 x 1.5 external thread

This ball joint is located on the right front passenger side or left front driver side.

This product is sold individually.

Upper front suspensionball joint for Citroën ID from 1965.
This front axle part will allow you to restore the hub of your Citroën ID.
Compatible models:Series A Sedan type ID19 - DE, ID19 (P) from 1966ID 19/20 Sedans (1985cc) - (1967-1971)ID 19/20 Estate (1985cc) - (1966-1969)ID 21 Estate (2175cc) - (1966-1969)

Suitable for Golf 3 GTi & VR6 (5x 100)

For Audi 80 and 90 with powersteering:
- 2.3 20V 7A (including Quattro)

Upper front suspension ball joint for Mercedes SL

For Mercedes SL R107:
- 280 SL (107.042) from 09/1974 to 08/1985
- 350 SL (107.043) from 02/1971 to 02/1980
- 380 SL (107.045) from 03/1980 to 08/1985
- 450 SL (107.044) from 03/1973 to 02/1980
- 500 SL (107.046) from 03/1980 to 08/1985

For Mercedes SLC Coupé C107 :
- 280 SLC (107.022) from 09/1974 to 09/1981
- 350 SLC (107.023) from 09/1971 to 03/1980
- 380 SLC (107.025) from 03/1980 to 09/1981
- 450 SLC (107.024) from 03/1973 to 10/1980
- 500 SLC (107.026) from 03/1980 to 09/1981

This original-quality front wishbone ball joint is located on the upper left or right wishbone on the wheel side. This ball joint is not available at retail from the manufacturer.

Sold individually
Original MEYLE quality

For Transporter T4 since 09/90->06/03
Mounted on upper arm
Higher quality: reinforced ball joint
Sold individually

For A3 (8L) All models including Quattro

Suitablefor:
- Golf 4 all models including 4-Motion (4 x 4) except R32 V6 3.2
- Bora all models including 4-Motion (4 x 4)
- New Beetle all models except RSi V6 3.2

For Audi 80 and 90 from chassis 89-J-373 599->:
- 4 cylinders without power steering

Support washer for Citroën Traction 11hppivot ball spring.
Dimension: 24x31x1mm
Sold individually.

Left or righteccentric bush essential for camber adjustment at the upper suspension ball joints, you'll need two bushes for the front axle to fit VW Combi Bay Window all models from 08/1967 to 07/1979.
Sold individually, remember to order two.

For Roadster:
- 1.8 M43
- 1.9 M43 & M44
- 2.0 M52
- 2.2i M54
- 2.8 M52
- 3.0i M54

For Coupé:
- 2.8 M52
- 3.0i M54

For safety reasons, it is advisable to change the suspension ball joint stop each time it is removed.

For left or right-hand side, sold individually

Compatible with Seat Leon type 1M all models including 4 wheel drive

Upper suspension knuckle for right or left side for Renault 4.
Compatible with Renault 4 :- 0.7L (680-702) type R1120 from chassis n°468775 to 954000- 0.8L (800-701) type R1123 from chassis n°212515 to 627131- 0.8L (800-701) type R2106 up to chassis n°024876

Lower suspension ball joint joint castle nut for Mazda MX-5 NB and NBFL

- For NB and NBFL all models

Enables you to attach the lower suspension ball joint to the hub carrier

Genuine Mazda part

Washer for upper suspension ball joint
For suspension ball joint with M10 thread (old version)
Check before ordering
Sold individually, 1 required per side

- For VW Beetle 1200, 1300, 1500 (except 1302/1303) & Karmann-Ghia with ball joint front suspension
Years: since 08/1965-> 11/1965

Rear wishbone ball joint for left or right sides, sold individually.

For:
- Audi 80/90 Quattro, 08/1982 ->03/1988
Chassis: no. 85-D-000 001 ->89-J-350 000.
- Audi Quattro, 08/1982 ->07/1991
Chassis no. 85-D-900 001 ->85-M-000 999.
- Audi Coupé Quattro, 12/1984 ->12/1987
Chassis: N° 85-F-000 001 ->85-J-010 000.

Front lower suspension ball joint joint replacement boot for Mazda MX-5 NA

- For NA all models

Suitable for left or right-hand
Sold individually

Genuine Mazda part