Bumper seal

Rear bumper gasket for VW Type 34.Sold individually.

These base gaskets hold and join the corners of the rear
between the corners of the rear bumper and the fenders.

For Karmann-Ghia type 14 all models 56 ->71

ForFront bumper 1958->1971

Horn grille seal for the Porsche 911 and 912 :

-> Porsche 912 :
- 912 1.6 from 1965 to 1969

-> Porsche 911 :
- 911 2.0 from 1965 to 1968
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973

Suitable for the right or left side

Sold individually

Protective rubber seal, between the horn grille and the bodywork, for Porsche 356 pre-A from 1954 and 356 A :

-> Porsche 356 pre-A :
- 356 1100 - 40 hp (369) of 1954
- 356 1300 - 44 hp (506 and 506/2) from 1954 to 1955
- 356 1300 S - 60 hp (589 and 589/2) from 1954 to 1955
- 356 1500 - 55 hp (546 and 546/2) from 1954 to 1955
- 356 1500 S - 70 hp (528 and 528/2) from 1954 to 1955

-> Porsche 356 A :
- 356 A 1300 - 44 hp (506/1) from 1956 to 1957
- 356 A 1300 S - 60 hp (589/2) from 1956 to 1957
- 356 A 1600 - 60 hp (616/1) from 1956 to 1959
- 356 A 1600 S - 75 hp (616/2) from 1956 to 1959

Suitable for the left or right side.

Sold individually

Front bumper wedge for VW Cox USA since 08/1974.Sold individually.

Hexagonal joint between bodywork and square front bumper bracket with shock absorbers. Rear, left and right sides, sold individually.
For VW Beetle 1303 specific USAYears: 08/1974 ->01/1980- Sedan, chassis since N° 135 2000 001->- Convertible, chassis since N°155 2000 001->

Mudguards between rear corner and bumper for VW Combi Split from 08/1959 to 07/1967.
Sold in pairs.

Protective rubber seal cover for horn
For Karmann Ghia type 14 from 56->74

ForRear bumper 1958->1969

Nervure Deluxe rubber bumper protection on square front bumper.
L = 186 mm

For VW Combi T2 BayWindow
Years : 08/1972 ->07/1979
Chassis : since N° 213 2000 001->

Front bumper stop ring for :- 911 from 1965 to 1973
Length: 1030mmWidth: 9.5mm
Sold individually.

Left seal between the left rear bumper and the left rear fender for Porsche 911 and 912 :

-> Porsche 912 :
- 912 1.6 of 1969

-> Porsche 911 :
- 911 2.0 T / E / S of 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973

German made gasket of the same quality as the original Porsche gasket.

Rear bumper central seal for Porsche 911, 912 and 930 :

-> Porsche 912 :
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989

Mounts under the central reflective PORSCHE covering.

Made from rubber,for European Beetles

Front bumper gasket for VW Type 34.Sold individually.

For a vehicle, U-shaped joint

For Beetle :
- 1200 08/1973 ->07/1974
- 1300 08/1967 ->07/1974
- 1500 08/1967 ->07/1970
- 1302 08/1970 ->07/1972
- 1303 08/1972 ->07/1974

Vertical seal for front mudguard sheet metal (screwed).
Seals between the mudguard and the body.
Left orright side, sold individually.

For VW Karmann-Ghia Type 14 Coupé and Cabriolet
Years: 1955 -> 1974

Rear bumper central seal for Porsche 911 and 912 :

-> Porsche 912 :
- 912 1.6 from 1965 to 1969
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.0 from 1965 to 1968
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973

This seal is located at the rear centre steel plate.

German made gasket of the same quality as the original Porsche gasket.