Side skirt

Short left-hand rocker panel for VW Transporter T25/T3, Bus, Van, Caravelle, Carat, Joker, Syncro (4x4) from 05/1979 to 07/1992.Lower partDimensions: approx. 124 x 12 cmThick top quality as original.

M5 typerocker panel for Bmw 5 Series:
- Compatible with all Bmw 5 Series E34 Sedan and Touring versions from 07/1987 to 06/1996, all engines included.

Porsche 911 Turboleft sill cover decoration :
- 911 Turbo 3.3 from 1978 to 1989
Sheet metal in storage paint, to be sanded and primed before painting.
Obturator (17), rubber strip (8) and screws (on the diagram in the third illustration photo) not supplied.

DANSK exterior left side door sill panel for Porsche 914-4 and 914-6 :

- 914-4 1.7 - 80 hp (022-W) from 1970 to 1973
- 914-4 1.7 - 80 hp (022-EA) from 1972 to 1973
- 914-4 1.7 - 72 hp (022-EB) from 1972 to 1973
- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976
- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976
- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974
- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976
- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976
- 914-6 2.0 - 110 hp (901.36/37/38/39) from 1970 to 1972

M3 look rocker panels for BMW 3 Series E36 Sedan, Touring, Coupé and Cabriolet from 11/1989 to 12/1999:

- All petrol and diesel models (except Compact, M3 and M-Technic)

Kit complete with seals, rivets and jack support covers.

ATTENTION: Clips and eyelets for upper rocker panel attachment are not supplied, but must be ordered separately.

These side skirts are supplied primed. We recommend that you first carry out a "blank assembly" on the vehicle to check that the parts fit properly before final painting.

Quality "adaptable" parts, not supplied by the manufacturer.

High-quality ABS plastic like the original equipment. It will bring a racy , sporty design to your E36!

This product is sold as a pair.

Right front rocker panel with bottom angle, between sliding door and fender. Repair piece for welding.
Suitable for VW Transporter T25/T3, Bus, Van, Caravelle, Joker, Westfalia, Syncro (4x4) from 05/1979 to 07/1992.
Dimensions: approx. 28 x 8 cm

Left side metal sill for Volkswagen Polo 3 6N1 and 6N2:

- All 3-door models from 09/1994 to 10/2001

ATTENTION: Not suitable for 5-door version!

Sheet thickness: 1 mm

The left-hand sill panel is supplied bare or with black stock paint, depending on the availability of our suppliers. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.

This external part of the weld-on door sill is "adaptable", as it does not come from the manufacturer.

Outer plate to repair the front left-hand cab door sill.

For VW Transporter T4, 09/1990 ->06/2003
All models.

Rocker panel opposite sliding door for VW Transporter T25 / T3 from 05/1979 to 07/1992.

Rocker panel stiffener for Porsche 356 pré-A, A and B T5 :

-> Porsche 356 pre-A :
- 356 1100 - 40 hp (369) from 1950 to 1954
- 356 1300 - 44 hp (506 and 506/2) from 1951 to 1955
- 356 1300 S - 60 hp (589 and 589/2) from 1954 to 1955
- 356 1500 Cabriolet - 60 cv (527) from 1952
- 356 1500 - 55 hp (546 and 546/2) from 1953 to 1955
- 356 1500 S - 70 hp (528 and 528/2) from 1953 to 1955

-> Porsche 356 A :
- 356 A 1300 - 44 hp (506/1) from 1956 to 1957
- 356 A 1300 S - 60 hp (589/2) from 1956 to 1957
- 356 A 1600 - 60 hp (616/1) from 1956 to 1959
- 356 A 1600 S - 75 hp (616/2) from 1956 to 1959

-> Porsche 356 B T5 :
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

Suitable for the front right or rear left sides.

Sold individually

Bas de caisse droit côté passager en métal pour BMW série 5 E12 et E28 Berline 4 portes :

- Tous modèles du 02/1972 au 12/1987 (y compris M5 et M535i)

La tôle de seuil droit est livrée nue ou en peinture noire de stockage selon l'arrivage de nos fournisseurs. Avant la mise en peinture définitive, il est essentiel de la traiter et de la préparer dans le but d'éviter que de la corrosion ne réapparaisse.

Cette partie extérieure du bas de porte à souder est dite "adaptable" car elle ne provient pas du constructeur.

Plate to repair the outside of the left step for a VOLKSWAGEN Transporter T5 from 2003 to 2015.

Right side sill for Peugeot 205 - 5 door

This sill for Peugeot 205 is only suitable for the 5 door versions listed below.
Mounts on the right side.

This right-hand sill for 2cvs (04/1970-07/1990) is high quality.

This right-hand rail for 2cv is made of electro-galvanised steel. Since April 1970, in addition to the wing attachment, it includes the seatbelt attachment. Perfectly designed to fit 2cv saloons, it can be adapted to 2cv vans by shortening it.

Straight reinforcement angle for VW Combi Bay Window from 08/1967 to 07/1979.

Rocker panel stiffener for Porsche 356 pré-A, A and B T5 :

-> Porsche 356 pre-A :
- 356 1100 - 40 hp (369) from 1950 to 1954
- 356 1300 - 44 hp (506 and 506/2) from 1951 to 1955
- 356 1300 S - 60 hp (589 and 589/2) from 1954 to 1955
- 356 1500 Cabriolet - 60 cv (527) from 1952
- 356 1500 - 55 hp (546 and 546/2) from 1953 to 1955
- 356 1500 S - 70 hp (528 and 528/2) from 1953 to 1955

-> Porsche 356 A :
- 356 A 1300 - 44 hp (506/1) from 1956 to 1957
- 356 A 1300 S - 60 hp (589/2) from 1956 to 1957
- 356 A 1600 - 60 hp (616/1) from 1956 to 1959
- 356 A 1600 S - 75 hp (616/2) from 1956 to 1959

-> Porsche 356 B T5 :
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

Suitable for the front left or rear right sides.

Sold individually

Complete long left sill from front to rear wheel arch for VW Transporter T25 / T3, Bus, Van, Caravelle, Carat, Joker, Syncro (4x4) from 05/1979 to 07/1992.Length: 165 (bottom) / 176cm (top) x height: 33cmThick top quality as original.

Passenger-side right sill in metal for Volkswagen Passat B3 Sedan and Variant type 35i :

- All models from 02/1988 to 09/1993

Sheet thickness: 1 mm

The right-side sill panel is delivered bare or with black stock paint, depending on the availability of our suppliers. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.

This external part of the weld-on door sill is "adaptable", as it does not come from the manufacturer.

Inner left-hand rocker panel reinforcement. Original quality.

For VW Kombi Bay Window T2
Years: 08/1967 -> 07/1979

Suitable for Golf 1 Cabriolet,
adapts for 2-door Golf 1 Saloon