Floor

This adhesive tape between chassis and body for DYANEs and Acadianes - 10m isolates the body from the chassis.

Essential when reassembling the car after dismantling, this adhesive foam strip protects and insulates the body from the chassis, reduces noise and prevents corrosion.

This single heater socket on bulkhead for 2cv vans is compatible with 2cv4 and 2cv6 cars.
Made in Europe and is manufactured of electro-galvanised steel and is welded to the bulkhead and enables you to connect the heating duct.

Straight frontfloor for Mini Austin :
- Compatible with all Mini Austin versions from 06/1959 to 12/1974 including Mini Austin 1300 GT 68hp model.
This body panel is delivered in storage paint. It will need to be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

This pedal floor panel for Dyanes and Acadianes is superior quality.

This pedal floor panel is European made and is higher quality than the original.
Perfectly faithful to the standard floor and is reinforced and its electro-galvanised steel offers excellent resistance to corrosion.

This floor panel under the rear seat for 2cvs after 1962 is superior quality.

Faithful to the original, this floor under the rear seat made of electro-galvanised steel for 2cv saloon cars after 1962 connects the side floors to the box in front of the boot.

DANSK Rear left seat pan for Porsche 911, 912 and 930 from 1973 to 1989 :

-> Porsche 912 :
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989

Ideal for the restoration of the backseat floor

This front bulkhead for 2cvs from 1970 is superior quality.

This bulkhead for 2cvs made of electro-galvanised steel is compatible with 2cv saloons and vans after 1970. It is manufactured in a way that is faithful to the original, using steel that has been given a treatment that guarantees excellent protection against corrosion.

The battery holder, the cable and wire routing, and the ventilation system are all perfectly designed and should not require any adjustments.

This under seat beam for 2CV A-AZ-AZAM (07/1949-02/1970)is a superior quality part.This complete under seat step for 2CV is true to the original. Made of electro-galvanized steel of a higher quality than the original, it allows you to find a solid rear seat support for many years.

Standard quality sheet metal

Rear left-hand quarter floor panel repair panel
with seat rails.

For Beetle, all versions from 08/1972->
Hatchback& Cabriolet: 1200 & 1303
from chassis no. 113 2000 001->

Welded front seat mounting brackets and slides .

For VW Bus Combi Split (08/1962-7/1967)
For left-hand drive without rear passage.

Spare wheel housing without crossbar for Porsche 911 type 964 :

- 964 3.6 Carrera 2 and Carrera 4 from 1989 to 1994
- 964 3.6 Carrera 2 and Carrera 4 Turbo-Look Factory from 1991 to 1994
- 964 3.6 Carrera RS - 260 hp from 1992
- 964 3.3 Turbo - 320 hp from 1991 to 1992
- 965 3.6 Turbo - 360 hp from 1993 to 1994

Original quality straight floor for Porsche 911 type F, G and 912 from 1965 to 1989 :

- Porsche 911 type F :

- 911 2.0 from 1965 to 1967
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973

- Porsche 911 type G :

- 911 2.7 from 1974 to 1977
- 911 S 2.7 from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 SC 3.0 from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989
- 911 Turbo 3.0 from 1975 to 1977
- 911 Turbo 3.3 from 1978 to 1989

- Porsche 912:

- 912 1.6 from 1966 to 1969
- 912 E 2.0 from 1976

For vehicles with left-side steering wheel.

Driver's side rear quarter floor to be welded to the chassis.
Standard quality, supplied without seat rail.

For VW Karmann Ghia type 14 (08/1963-07/1974)

This rubber plug for the gas pedal rod is designed for Citroën Dyane and Acadiane models with 3-pedal suspended crankset (from 1978).
It creates a seal between the engine bay and the passenger compartment.
Compatible models:- 2CV 4 type AZ KB/A2: 09/1977 to 09/1978- 2CV 6 type AZ KA/A2: 09/1977 to 07/1990- 2CV AKS type AK-AK: 09/1977 to 03/1978
- DYANE 6 type AYA3/AYB/AY-CB: 09/1977 to 08/1983- Acadiane type AY-CD: 03/1978 to 03/1987

This 2CV right front floor repair sheet is of superior quality.Compatible with all 2CV sedan and van models.It allows targeted repair of damaged floors, avoiding the need for complete replacement.

This right-hand floor repair panel for Dyane cars and Acadiane - interior is superior quality.
Made of electro-galvanised steel and is higher quality than the original sheet metal.
For neatly repairing a damaged floor without having to replace it completely.

This adhesive tape between chassis and body for AMI 6 and AMI 8 cars - 10m isolates the body from the chassis.

Essential when reassembling the car after dismantling, this adhesive foam strip protects and insulates the body from the chassis, reduces noise and prevents corrosion.

Front right floor for Renault 5 (1972-1984)

For Renault 5 all models from 1972 to 1984

This high-quality right-front floor panel replaces the interior passenger floor pan.

This complete trunk floor with corners for 2cv A-AZ-AZAM (07/1949-02/1970) is of a higher quality than the original.This trunk floor for 2CV is complete. Made of electro-galvanized steel, It integrates the trunk floor, the curve of the spare wheel, the top plate and the right and left corners already assembled. This repair element allows you to find a trunk bottom like new.