Floor

DANSK right rear seat pan repair sheet for Porsche 911 type F from 1965 to 1971 :

- 911 2.0 from 1965 to 1967
- 911 2.0 S from 1967
- 911 2.0 T / L / S from 1968
- 911 2.0 T / E / S from 1969
- 911 2.2 T / E / S from 1970 to 1971

DANSK repair sheet for left rear seat pan for Porsche 911 F type from 1965 to 1971 :

- 911 2.0 from 1965 to 1967
- 911 2.0 S from 1967
- 911 2.0 T / L / S from 1968
- 911 2.0 T / E / S from 1969
- 911 2.2 T / E / S from 1970 to 1971

Partition panel for fuel tank compartment for VW Combi Split Brazilian Pick-up from 03/1955 to 07/1967.

DANSK front bulkhead for Porsche 911 type F from 1965 to 1967 :

- 911 2.0 from 1965 to 1967
- 911 2.0 S from 1967

Floor plate between front wheel arches for VW Combi Split from 03/1955 to 07/1967

Underfloor frame composed of side and cross beams.
Also includes the 4 corner pieces.
This complete framework saves you time when restoring your camper van.
It includes everything in the picture.

For VW Combi Split Brazil (1957-1975)

Please note: there is a minimum supplier lead time of 12 weeks if the lead time displayed on the website is more than 1 week.

Weld-on right rear crossmember plate for half floor pan.
Right side

For VW Beetle all models

Driver's side quarter floor for welding to chassis.
Standard quality, supplied without seat rail.

For VW Kübel, 181 (08/1968-)

1/2 Front apron, set of inner and outer plates forming the lower bulkhead on the tunnel behind the pedals. To be welded. Brazil repro quality model.

For Beetle 1200, 1300, 1500, up to ->07/1967
up to chassis N°->117 999 000.

Rear seat support for VW Combi Split pick-up double cab up to 07/1963

Rear seat bracket for VW Combi Split pick-up double cab from 08/1963 to 07/1967

Rear seat bracket for VW Combi Bay Window pick-up double cab from 08/1967 to 07/1979

Chassis kit for VW Combi Split from 03/1955 to 07/1959.
All parts shown on the diagram are part of the kit, which includes the main structural parts

Chassis kit for VW Combi Split from 08/1959 to 07/1967.
All parts shown on the diagram are part of the kit, which includes the main structural parts

Frame support under load bed for VW Combi Split up to 07/1967
This complete frame will save you time when restoring your bus.

Suitable for:
- Golf 1 Saloon and Cabriolet
- Caddy
- Jetta
- Sirocco

Complete left half floor on driver's side for BMW 02 series E10 Sedan:

- All models 1502 to 2002Turbo from 03/1966 to 07/1977

ATTENTION: For the LHD left-hand drive version, the opening for the pedal box must be made (a marking is present on the part), the floor being full without a hole so that it can also be adapted to the RHD right-hand drive version!

Enclosed by insulation and carpeting, the BMW E10's floorboards are showing the effects of time, with perforating rust and various impacts underneath. Replacing them in their entirety will enable the body to be restored to its original dimensions.

This half-floor, comprising in 1 piece the front and rear sections (from the firewall to the rear seats), is delivered bare in black storage paint. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.

Give your E10 a high-quality body part!

This metal repair plate is called "adaptable" because it does not come from the manufacturer.

This left-hand floor repair panel for Dyane cars and Acadiane - interior is superior quality.
Made of electro-galvanised steel and is higher quality than the original sheet metal.
For neatly repairing a damaged floor without having to replace it completely.

This three pedal suspended floor panel for 2cvs after 1978 is high quality.

From 1978 onwards, 2CV saloon cars gradually received a suspended accelerator pedal.
The dual body carburettor is now connected by a cable instead of a rod.

This single heater socket on bulkhead for 2cv is compatible with 2cv4 and 2cv6 cars.
Made in Europe and is manufactured of electro-galvanised steel and is welded to the bulkhead and enables you to connect the heating duct.