Inlet manifold

Inlet piperetainer.
Mounting: under carburetor / crankcase.

For VW Cox, Split combi and Karmann Ghia
With 30hp cast foot engine

Pipes for T1 engine with single-intake cylinder heads
Designed to be fitted on Weber 34 ICT type caburettors

CSP (Germany) short aluminum pipes. Specially designed for a Type 4 engine in a Cox with Porsche cooling cap and turbine, also ideal for a 914-4. Optimized maximum flow with a diameter adjusted to 40 mm. Plenty of material available on the staves to allow them to be reworked as required. Supplied with German quality studs, screws and gaskets.

For 2 Weber IDF or Dellorto DRLA 40 mm carburetors
For Type 4 engines with 3 mounting holes on cylinder heads.

CSP (Germany) short aluminum pipes. Specially designed for a Type 4 engine in a Cox with Porsche cooling cap and turbine, also ideal for a 914-4. Optimized maximum flow with a diameter adjusted to 44 mm. Plenty of material available on the staves to allow them to be reworked as required. Supplied with German quality studs, screws and gaskets.

For 2 Weber IDF or Dellorto DRLA 44 mm carburetors
For Type 4 engines with 3 mounting holes on cylinder heads.

CSP (Germany) short aluminum pipes. Specially designed for a Type 4 engine in a Cox with Porsche cooling cap and turbine, also ideal for a 914-4. Optimized maximum flow with a diameter adjusted to 44 mm. Plenty of material available on the staves to allow them to be reworked as required. Supplied with German quality studs, screws and gaskets.

For 2 Weber IDF or Dellorto DRLA 44 mm carburetors
For Type 4 engines with 4 mounting holes on cylinder heads.

CSP (Germany) short aluminum pipes. Specially designed for a Type 4 engine in a Cox with Porsche cooling cap and turbine, also ideal for a 914-4. Optimized maximum flow with a diameter adjusted to 48 mm. Plenty of material available on the staves to allow them to be reworked as required. Supplied with German quality studs, screws and gaskets.

For 2 Weber IDF or Dellorto DRLA 48 mm carburetors
For Type 4 engines with 3 mounting holes on cylinder heads.

CSP (Germany) short aluminum pipes. Specially designed for a Type 4 engine in a Cox with Porsche cooling cap and turbine, also ideal for a 914-4. Optimized maximum flow with a diameter adjusted to 48 mm. Plenty of material available on the staves to allow them to be reworked as required. Supplied with German quality studs, screws and gaskets.

For 2 Weber IDF or Dellorto DRLA 48 mm carburetors
For Type 4 engines with 4 mounting holes on cylinder heads.

PMO 40x36mm intake pipes in standard size for Porsche 911 with K-Jetronic configuration

Dimensions:

- Carburetor-side diameter: 40mm
- Cylinder head diameter: 36mm

Kit contents:

- 2 intake pipes
- 6 gaskets
- 12 mounting studs, bolts and washers

PMO 50x42mm tall intake pipes for Porsche 911 with K-Jetronic configuration

Dimensions:

- Carburetor-side diameter: 50mm
- Cylinder head diameter: 42mm

Kit contents:

- 2 intake pipes
- 6 gaskets
- 12 mounting studs, bolts and washers

PMO 40x32mm intake pipes in standard size for Porsche 911 with carburetor or MFI (mechanical injection) configuration .

Dimensions :

- Carburetor-side diameter: 40mm
- Cylinder head side diameter: 32mm

Kit contents:

- 2 intake pipes
- 6 gaskets
- 12 mounting studs, bolts and washers

PMO 46x35mm intake pipes in standard size for Porsche 911 with K-Jetronic configuration

Dimensions:

- Carburetor-side diameter: 46mm
- Cylinder head diameter: 35mm

Kit contents:

- 2 intake pipes
- 6 gaskets
- 12 mounting studs, bolts and washers

PMO 46x42mm intake manifolds in standard size for Porsche 911 with Motronic configuration

Dimensions:

- Carburetor-side diameter: 46mm
- Cylinder head diameter: 42mm

Kit contents:

- 2 intake pipes
- 6 gaskets
- 12 mounting studs, bolts and washers

PMO 40x36mm intake pipes in standard size for Porsche 911 with carburetor or MFI (mechanical injection) configuration .

Dimensions :

- Carburetor-side diameter: 40mm
- Cylinder head side diameter: 36mm

Kit contents:

- 2 intake pipes
- 6 gaskets
- 12 mounting studs, bolts and washers

PMO 46x42mm tall intake manifolds for Porsche 911 with carburetor or MFI (mechanical fuel injection) configuration .

Dimensions :

- Carburetor-side diameter: 46mm
- Cylinder head side diameter: 42mm

Kit contents:

- 2 intake pipes
- 6 gaskets
- 12 mounting studs, bolts and washers

Pair of intake pipes for VW type 4 engine and WEBER 48 IDA carburettors.
Shape, specially designed for type 4 vertical cooling fans for Type 1 engines.
Sold in pairs.
German quality seals and hardware.

PMO 46x39mm tall intake manifolds for Porsche 911 with carburetor or MFI (mechanical fuel injection) configuration .

Dimensions :

- Carburetor-side diameter: 46mm
- Cylinder head side diameter: 39mm

Kit contents:

- 2 intake pipes
- 6 gaskets
- 12 mounting studs, bolts and washers

PMO 40x37mm tall intake manifolds for Porsche 911 with carburetor or MFI (mechanical fuel injection) configuration .

Dimensions :

- Carburetor-side diameter: 40mm
- Cylinder head side diameter: 37mm

Kit contents:

- 2 intake pipes
- 6 gaskets
- 12 mounting studs, bolts and washers

PMO 46x39mm tall intake pipes for Porsche 911 with K-Jetronic configuration

Dimensions:

- Carburetor-side diameter: 46mm
- Cylinder head diameter: 39mm

Kit contents:

- 2 intake pipes
- 6 gaskets
- 12 mounting studs, bolts and washers

PMO 46x38mm intake manifolds in standard size for Porsche 911 with K-Jetronic configuration

Dimensions:

- Carburetor-side diameter: 46mm
- Cylinder head diameter: 38mm

Kit contents:

- 2 intake pipes
- 6 gaskets
- 12 mounting studs, bolts and washers

PMO 40x37mm tall intake pipes for Porsche 911 with K-Jetronic configuration

Dimensions:

- Carburetor-side diameter: 40mm
- Cylinder head diameter: 37mm

Kit contents:

- 2 intake pipes
- 6 gaskets
- 12 mounting studs, bolts and washers