Shock absorbers accessories

Mounting bolt on rear suspension arm. Left or right-hand. 4 required per vehicle, each.
Dimensions: M12 x 1.5 x 110 mm. Soldper unit.

For VW Transporter T25/T3, 05/1979 ->07/1992
All models including Syncro version (4 x 4).

Sold individually
For Transporter T25 / T3 from 05/79 to 07/92

Upper and lower rubber silent block
For shock absorbers
Sold individually. Requires 2 per shock absorber
Original VOLKSWAGEN part (Brazil).

For VW Beetle, Karmann-Ghia type14, Combi Bay window, Split

Suitable for:
- Golf 1 Saloon, Cabriolet and Caddy
- Scirocco

Upper damper spacer sleeve ring.
Left or right side, sold individually.

For VW Beetle 1303 Saloon & Cabriolet
Years: 08/1973 ->01/1980
Chassis:from no. 134 / 154 2000 001->

Insert bushing on upper and lower silent block of the shock absorber.
For the front or rear, sold individually.
Diameter: 12 mm
Length: 32 mm

For VW Beetle, Karmann Ghia, Split Bus & Bay Window

Centre mounting needle screw for front axle with spindles or ball joints blades onupper or lower suspension arms.
6 required per vehicle, sold per unit.

For:
- Beetle 1200, 1300, 1500 (except 1302, 1303)
- Karmann-Ghia Type 14 & 34
- Type 3 (3 parts required)
-Kübel 181
- Combi Split & Bay Window

Lock nut on centre mounting needle screw for blades on front axle with spindles or ball and upper and lower suspension arms. 6 required per vehicle, sold per unit.

For:
- Beetle 1200, 1300, 1500 (except 1302, 1303)
- Karmann-Ghia Type 14 & 34
- Type 3 (3 parts required)
- Kübel 181
-Combi Split & Bay Window

Nut on fixing screw M12 x 1.5 for front or rear lower suspension arm for VOLKSWAGEN Transporter T25 / T3 from 05/1979 to 07/1992
all models including Syncro (4x4).

Suitable for:
- Golf 1 saloon, cabriolet and Jetta 1
- Scirocco
- Golf 2 and Jetta 2
- Corrado
- Golf 3 and Vento
- Polo 6N1, 6N2 and 6V2
- Passat 3 (35i)

Metal ring on left or right rear shock absorber rod.
Fits under the upper spring cup.

Compatible with Seat Ibiza type 6K all models

Rear shock absorber rubber for Mazda MX-5 NC and NCFL

For NC and NCFL all models
Left or right-hand side
Protects from dust and used as a baseplate for the shock absorber spring

Genuine Mazda part

This washer for 2cvs, Dyanes and Meharis - M12X36X2mm is faithful to the original.

The 12mm shock absorber axle washer is compatible with all models with small suspension cylinders.
It keeps the suspension dampers aligned.

FORST strut mounting eccentric screw for Porsche 924 from 1976 to 1988 :
- 924 2.0 - 125 hp (XJ/XK) from 1976 to 1985- 924 2.5 S - 150 hp (M44.07/M44.08) from 1986 to 1987- 924 2.5 S - 160 hp (M44.09/M44.10) from 1988- 924 2.0 Turbo - 170 hp (M31.01) from 1979 to 1980- 924 2.0 Turbo - 177 hp (M31.03) from 1981 to 1985- 924 2.0 Carrera GT - 210 hp (M31.50) from 1981
Technical specifications :- Diameter: 12mm- Thread pitch: 1.5- Total length: 62mm- Thread length: 25mm- Original reference: 171 407 265
Sold individually

This right front shock absorber support plate for Dyane (08/1967-07/1975) is a quality fabrication.

This right front suspension plate for Dyane allows conversion of a friction front suspension system to a shock absorber system. The plate is fitted in place of the right-hand front wiper, and allows a shock absorber to be mounted on its 12mm threaded axle. Make sure you have the necessary washers and nuts.

Compatible models:

- DYANE (425) type AYA: 08/1967 to 01/1969
- DYANE 4 type AYA2: 03/1968 to 08/1975
- DYANE D6 type AYA3: 01/1968 to 04/1968
- DYANE 6 type AYA3/AYB/AY-CB: 05/1968 to 07/1975

This left front shock absorber support plate for 2CV A-AZ-AZAM (07/1949-02/1970 ) is a quality manufacture.

This left front suspension plate for vintage 2CVs allows conversion of a friction front suspension system to a shock absorber system. The plate is fitted in place of the left front wiper and allows a shock absorber to be mounted on its 12mm threaded axle. Make sure you have the necessary washers and nuts.

Compatible models:

- 2CV A type A: 07/1949 to 03/1961
- 2CV AZ type AZ: 10/1954 to 03/1963
- 2CV AZL type AZ: 12/1956 to 03/1963
- 2CV AZLP type AZ: 09/1957 to 03/1963
- 2CV AZA type AZ-A: 03/1963 to 02/1970
- 2CV AZAM type AZ-AM: 03/1963 to 09/1967

Upper nut cover for Carat shock absorber head or headlight mount for VW Transporter T25 from 05/1979 to 07/1992.

Cover for upper bearing on strut

For VW Cox 1303 all models from 08/1973 onwards

This suspension coffee pot retaining ring for Citroën ID (1958/1975 ) is a quality remanufacture.

This small suspension bellows protection ring for ID is complementary to the replacement of front or rear suspension coffee pots and ball kit.

Inside diameter: 25mm

Upper suspension thrust bearing for VOLKSWAGEN Transporter T5, Multivan, Caravelle, from 04/2003 to 07/2008.All petrol & diesel models, including 4-Motion (4x4) version