Shock absorbers accessories

FORST strut mounting eccentric screw for Porsche 968 from 1992 to 1995 :

- 968 3.0 - 240hp (M44.43/M44.44) from 1992 to 1995- 968 Club Sport 3.0 - 240hp (M44.43) from 1993 to 1995
Technical specifications:- Diameter: 12mm- Thread pitch: 1.5- Total length: 62mm- Thread length: 25mm- Original reference: 171 407 265
Sold individually

Polyurethane lower ring for left or right rear shock absorber spring on all VOLKSWAGEN Transporter T25 models.

Front left or right shock absorber cover for VW LT from 1996 to 2006 from LT28 to LT46 including motorhome versions.

This suspension bolt spacer for Mehari - M12 is faithful to the original.

This thick 12mm shock absorber shaft washer is made of bichromated steel.
It is compatible with every model that has small suspension cylinders and is designed to keep the shocks perfectly aligned.

This washer for for Dyanes - M12X36X2mm is faithful to the original.

The 12mm shock absorber axle washer is compatible with all models with small suspension cylinders.
It keeps the suspension dampers aligned.

This right front shock absorber support plate for 2CV (02/1970-07/1975) is a quality manufacture.

This right front suspension plate for 2CV allows conversion of a friction front suspension system to a shock absorber system. The plate is fitted in place of the right-hand front wiper and allows a shock absorber to be mounted on its 12mm threaded axle. Make sure you have the necessary washers and nuts.

Compatible models:

- 2CV 4 type AZ KB/A2: 02/1970 to 07/1975
- 2CV 6 type AZ KA/A2: 02/1970 to 07/1975

This rear suspension ball pin for Citroën DS (1956-1975 ) is a remanufacture.

This rear suspension ball retaining pin for DS is compatible with all sedan and station wagon models.

This rubber ring for hydraulic return hoses for Citroën DS is placed at the hose attachment points.
Their function is to protect the LHM return hose and prevent premature wear.
dimension: 15x20x16

This washer for 2cvs before 1970 - M12X36X2mm is faithful to the original.

The 12mm shock absorber axle washer is compatible with all models with small suspension cylinders.
It keeps the suspension dampers aligned.

This rear suspension cylinder ball seat for Citroën ID (1958-1975) is a quality remanufacture.

This front suspension ball seat for ID is compatible with all sedan or station wagon models.

The height adjuster automatically regulates the car's ground clearance, so that it remains constant whatever the vehicle's load or road irregularities.
A defective height adjuster can upset the car's entire balance.
This height adjuster repair kit will restore the height adjuster on your Citroën ID.
The kit consists of :2 x diaphragms2 x rings to hold the diaphragms in place2 x dust covers
Designed for LHM correctors.
Compatible with all Citroën ID models.

Set of protective sleeves and 50mm stops for the two front shock absorbers.Fits all VW Transporter T5 with 50mm bumpers from 2003 to 2015 with code PR-1BV.

Front lower control arm tie rod self-tightening nut for VW Transporter T25 from 1979 to 1992.

These two polyurethane stops act like additional springs on the front suspension of the VOLKSWAGEN Transporter T25 from 1979 to 1992.

POWERFLEX brand

This ID (1958/1975) rear suspension ball housing boot is a quality remanufacture.

This ID rear suspension upper dust cover is complementary to the rear suspension coffee pot replacement.

This rubber ring for hydraulic return hoses for Citroën ID is placed at the hose attachment points.
Their function is to protect the LHM return hose and prevent premature wear.
dimension: 15x20x16

Lower shock attachment bolt for MX5 NB and NBFL

Suitable for front and rear
For all models including sport chassis

Used to attach the shock absorber base to the suspension linkage.
Use the MX15486 nut to attach the front shock, the rear one is screwed directly into the lower linkage

Original MAZDA part

Is positioned on the end of the front shock absorber rod.
For VOLKSWAGEN Transporter T25 since chassis 24-E-043404->
Warning: there are 2 lengths, measure your one to make sure it is 26 mm long.

Set of protective sheaths and 70mm stops for both front shock absorbers.Fits all VW Transporter T5 with 70mm bumpers from 2003 to 2015 with PR-K4H + 1BA codes.

This Citroën DS (1956/1975) rear suspension ball replacement kit is a quality remanufacture.

This DS rear suspension ball repair kit allows you to rebuild the interior of DS rear suspensions:
- a ball
- a clip
- dust cover