Shock absorbers accessories

Upperrear shock absorber silentblock for Peugeot 205 all models
Located at the upper shock absorber joint.
Assignments :- 1.0 GL, GE, XL, XE, Junior 954cm3 45hp (XV8) from 02/1983 to 07/1987- 1.0 XL, GL, Junior 954cm3 45hp (TU9) from 08/1987 to 07/1992- 1.0 XE, XR, Junior catalyzed 954cm3 50hp (TU9M/Z) from 08/1992 to 07/1995- 1.1 GL, GR, XL, XR 1124cm3 50hp (XW7) from 02/1983 to 07/1987- 1.1 GL, XL, GR, XR 1124cm3 55hp (TU1) from 08/1987 to 07/1992- 1.1 XE, GE, XL, GL, XR, GR catalysed 1124cm3 60hp (TU1M/Z) from 08/1992 to 07/1995- 1.3 Rallye 1294cm3 103hp (TU24) from 08/1987 to 07/1992- 1.4 GR, SR, XR 1360cm3 60hp (XY7) from 02/1983 to 07/1987- 1.4 GT, XT, XS 1360cm3 80hp (XY8) from 02/1983 to 07/1987- 1.4 GR, SR, XR 1360cm3 65hp (TU3) from 08/1987 to 07/1988- 1.4 GR, SR, XR 1360cm3 69hp (TU3A) from 08/1988 to 07/1990- 1.4 GR, SR, XR 1360cm3 75hp (TU3F2) from 08/1990 to 07/1992- 1.4 GR, SR, XR Catalyzed 1360cm3 75hp (TU3M/Z) from 08/1992 to 12/1998- 1.4 GT, XS 1360cm3 85hp (TU3S) from 08/1987 to 07/1992- 1.6 GT, XS 1580cm3 89hp[lm1] (XU5M) from to 07/1992- 1.6 GT, XS 1580cm3 89hp (XU5M/Z) from 08/1992 to 07/1993- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1985 to 07/1987- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1987 to 07/1993- 1.6 Automatic catalyzed 1580cm3 89hp (XU5M/Z) from 08/1993 to 08/1994- 1.6 GTI 1580cm3 105hp (XU5J) from 03/1984 to 12/1986- 1.6 GTI 1580cm3 115hp (XU5JA) from 03/1986 to 12/1986- 1.6 GTI 1580cm3 115hp (XU5JA) from 01/1987 to 07/1992- 1.8 GLD, GRD, SRD 1769cm3 60hp (XUD7) from 09/1983 to 07/1987- 1.8 XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1984 to 07/1987- 1.8 GLD, GRD, GTD, XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1987 to 12/1998- 1.8 Dturbo 1769cm3 78hp (XUD7T) from 08/1990 to 12/1998- 1.9 D 1905cc 65hp (XUD9)- 1.8 Turbo 16 1775cm3 200hp (XU8T) from 03/1984 to 12/1987- 1.9 GTI 1905cm3 130hp (XU9JA) from 01/1987 to 07/1992- 1.9 GTI Catalyzed 1905cm3 122hp (XU9JA/Z) from 08/1992 to 12/1993- 1.9 Gentry 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993
Peugeot 205 Cabriolet:- 1.1 CJ 1124cm3 55hp (TU1) from 08/1987 to 07/1992- 1.1 CJ Catalysée 1124cm3 60hp (TU1M/Z) from 08/1992 to 07/1995- 1.4 CT 1360cm3 80hp (XY8) from 07/1986 to 07/1987- 1.4 CJ 1360cm3 65hp (TU3) from 08/1987 to 07/1988- 1.4 CJ 1360cm3 69hp (TU3A) from 08/1988 to 07/1990- 1.4 CJ 1360cm3 75hp (TU3F2) from 08/1990 to 07/1992- 1.4 Cabriolet 1360cm3 75hp (TU3M/Z) from 08/1992 to 07/1995- 1.6 CTI 1580cm3 115hp (XU5JA) from 08/1985 to 07/1992- 1.9 CTI Catalyzed 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993

This rear suspension cylinder ball seat for Citroën DS (1956-1975) is a quality remanufacture.

This front suspension ball seat for DS is compatible with all sedan and station wagon models.

Lower shock absorber attachment bolt for Mazda MX-5 NA

Suitable for front and rear
For all models including sport chassis

Used to attach the shock absorber base to the suspension linkage.
Use the MX15485 nut to attach the front shock, the rear one is screwed directly into the lower linkage

Original MAZDA part

Front shock absorber cover for VW Transporter T5 from 2003 to 2015 with code PR-1BVHeight 50 mm

Rubber anti-destruction stop on front shock absorber

For Beetle 1303, all versions from 08/1973->
from chassis no. 134 2000001->/154 2000 001->
with front axle with 2 mounting points.

This washer for Meharis - M12X36X2mm is faithful to the original.

The 12mm shock absorber axle washer is compatible with all models with small suspension cylinders.
It keeps the suspension dampers aligned.

Lower bolt for front shock absorber.
Length: M14 x 175 mm.
Original Volkswagen Classic Parts.

For VW Transporter T4, Multivan
California, Syncro (4 x4)
Years : 09/1990 ->12/1995
Up to chassis N°->70-T-199 999.

This conversion plate for right front shock absorber mounting on 2CV chassis with friction damper (02/1970-07/1975 ) is a quality manufacture.

This shock absorber mounting plate for 2CV allows conversion of a friction front suspension system to a shock absorber system. The plate attaches to the original chassis at the level of the suspension pot anchors and allows a shock absorber to be mounted on its 12mm threaded axle.

Compatible models:

- 2CV 4 type AZ KB/A2: 02/1970 to 07/1975
- 2CV 6 type AZ KA/A2: 02/1970 to 07/1975

This suspension bolt spacer for 2cvs before 1970 - M12 is faithful to the original.

This thick 12mm shock absorber shaft washer is made of bichromated steel.
It is compatible with every model that has small suspension cylinders and is designed to keep the shocks perfectly aligned.

Febi rear suspension sphere for Bmw 5 Series :
- Compatible with all Bmw 5 Series E34 Sedan and Touring versions from 09/1987 to 06/1996 including sport model type M5 E34.
Please note:
- Sphere compatible only with original levelling system.
- Need 2 spheres for 1 vehicle.
- Sold individually.

This ball housing bellows for DS rear suspension (1956/1975) is a quality remanufacture.

This rear suspension upper dust cover for DS is complementary to the rear suspension coffee pot replacement.

Front shock absorber lower bolt nut for Mazda MX-5 NB and NBFL

Suitable for all models including sport chassis

Allows the front shock absorber to be attached to the lower front suspension linkage

Sold individually, one nut required per side
Genuine Mazda part

Left and right rear suspension lower spring plate for VW Transporter T5 from 2005 to 2015.
All versions, all engines.

This left front shock absorber support plate for Mehari (06/1968-07/1975) is a quality fabrication.

This left front suspension plate for Mehari allows conversion of a friction front suspension system to a shock absorber system. The plate is fitted in place of the left front wiper, and allows a shock absorber to be mounted on its 12mm threaded axle. Make sure you have the necessary washers and nuts.

Compatible models:

- Méhari série1 type AY-CA: 10/1968 to 07/1975

This left front shock absorber support plate for 2CV (02/1970-07/1975) is a quality manufacture.

This left front suspension plate for 2CV allows conversion of a friction front suspension system to a shock absorber system. The plate is fitted in place of the left front wiper and allows a shock absorber to be mounted on its 12mm threaded axle. Make sure you have the necessary washers and nuts.

Compatible models:

- 2CV 4 type AZ KB/A2: 02/1970 to 07/1975
- 2CV 6 type AZ KA/A2: 02/1970 to 07/1975

Impergomrubber front shock absorberwasher for Fiat 500 N, D, F, L and R (1957-1975)
4 washers are required per shock absorber, 2 for the lower part and 2 for the upper part. Fits left or right shock absorber.
Original quality part
Sold individually
For models listed below:- Fiat 500 N from 1957 to 1960- Fiat 500 D from 1960 to 1965- Fiat 500 F from 1965 to 1968- Fiat 500 L from 1968 to 1972- Fiat 500 R from 1972 to 1975

Upper bolt for mounting the shock absorber on thefront axle with spindles.
Diameter: 12 mm
Thread: 10 mm
Left or right-hand side, sold per unit.

For Beetle & Karmann-Ghia, 1949 ->07/1962
Chassis no. 117 054 ->4 846 835.

This rear suspension cylinder bracket for Citroën ID (1958-1975 ) is a remanufacture.

This rear suspension cylinder bracket for ID is compatible with all sedan and station wagon models.

This rear suspension cylinder bracket for Citroën DS (1956-1975 ) is a remanufacture.

This front suspension cylinder bracket for DS is compatible with all sedan and station wagon models.

FORST strut mounting eccentric screw for Porsche 944 from 1982 to 1991 :
- 944 phase 1 - 2.5 - 163hp (M44.01 to 04) from 1982 to 1985- 944 phase 2 - 2.5 - 163hp (M44.05 to 08) from 1985 to 1987- 944 phase 2 - 2.5 - 160hp (M44.09/M44.10) from 1988- 944 phase 2 - 2.5 S - 190hp (M44.40) from 1987 to 1988- 944 phase 2 - 2.7 - 165hp (M44.11/M44.12) from 1989- 944 phase 2 - 3.0 S2 - 211hp (M44.41) from 1989 to 1991- 944 2.5 Turbo - 220hp (M44.50/M44.51) from 1986 to 1988- 944 2.5 Turbo S/Cup M578 - 250hp (M44.52) from 1988- 944 2.5 Turbo - 250hp (M44.52) from 1989 to 1991
Technical data :- Diameter: 12mm- Thread pitch: 1.5- Total length: 62mm- Thread length: 25mm- Original reference: 171 407 265
Sold individually