Beam

Motorola alternator regulator harness for Porsche 911 F type from 1965 to 1968 :

- 911 2.0 from 1965 to 1967
- 911 2.0 S from 1967
- 911 2.0 T / L / S from 1968

Comprises 3 wires allowing use of dual filament bulb for side light and indicator

This beam clamp for AMI 6 and AMI 8 - 78mm is identical to the original.

This fabric reinforced rubber strap is a perfect reproduction of the original clamps. It designed to hold the wires for the electrics just like when they left the factory.

Harness with flasher relay connector for Porsche 944 from 1985 to 1991 :
- 944 phase 2 - 2.5 - 163hp (M44.05 to 08) from 1985 to 1987- 944 phase 2 - 2.5 - 160hp (M44.09/M44.10) from 1988- 944 phase 2 - 2.5 S - 190hp (M44.40) from 1987 to 1988- 944 phase 2 - 2.7 - 165hp (M44.11/M44.12) from 1989- 944 phase 2 - 3.0 S2 - 211hp (M44.41) from 1989 to 1991
- 944 2.5 Turbo - 220hp (M44.50/M44.51) from 1986 to 1988- 944 2.5 Turbo S/Cup M578 - 250hp (M44.52) from 1988- 944 2.5 Turbo - 250hp (M44.52) from 1989 to 1991

Sheathed electrical circuit wiring, original USA type, supplied with connectors, grommets and English instructions with diagrams.

This harness is not complete and includes only the main harness.

For VW Beetle Sedan

This beam clamp for 2cv vans - 120mm is identical to the original.

This fabric reinforced rubber strap is a perfect reproduction of the original clamps. It designed to hold the wires for the electrics just like when they left the factory.

Ignition switch harness for Porsche 911 F type from 1970 to 1971 :

- 911 2.2 T / E / S from 1970 to 1971

Engine wiring harness for Porsche 911 type F from 1970 to 1971 with MOTOROLA alternator:

- 911 2.2 T / E / S from 1970 to 1971

This beam clamp for 2CV and derivatives - 120mm is identical to the original.
This fabric-reinforced rubber strap is a perfect reproduction of the original clamps. It holds the wiring harness wires just as they were when they left the factory.

USA original sheathedelectrical circuit wiring, supplied with connectors, grommets and English instructions with diagrams.
For VW Beetle Sedan and Convertible 1302 from 08/1971 to 07/1972

Sheathed main circuit wiring supplied with connectors, cable glands and English instructions with diagrams for VW Combi Bay Window from 08/1969 to 07/1971 from chassis No. 219 000 001 to No. 211 2300 000.

USA original sheathed electrical circuit wiring, delivered with connectors, cable grommets and instructions in English with diagrams.

For VW Beetle Saloon
Years: 08/1957 ->07/1959
Chassis: 1 600 440 ->2 528 667.
Models with directional arrow indicators.

Mecatechnic has selected for you a specific harnesswith a 7-pin plug. This allows you to connect your trailer, bike carrierand/or caravan to your vehicle in accordance with your manufacturer's recommendations.

For BMW 3 SERIES (type E90 E93)
Production dates: from 2004 to 2010

Wiring characteristics:

- Rear and front connections
- Installation inside boot mandatory: no
- PDC deactivation (parking assistance): Yes
- Average assembly time: 90 minutes

USA original sheathed electrical circuit wiring, delivered with connectors, cable grommets and instructions in English with diagrams.

For VW Kombi T2 Bay Window
Years: 08/1967 ->07/1969
Chassis: 218 000 001 ->219 300 000.

This beam clamp for Mehari - 62mm is identical to the original.

This fabric reinforced rubber strap is a perfect reproduction of the original clamps. It designed to hold the wires for the electrics just like when they left the factory.

Engine wiring harness for 1976 Porsche 911 type G :
- 911 / 911 S from 08-1975 to 07-1976
A wiring harness is an often overlooked wear part that tends to oxidize over the years and create resistance, particularly in exposed areas such as an engine compartment. As well as causing a drop in the power supply to electrical components, this can be a source of fire! Make the most of your 911 with a new electrical system.

This beam clamp for 2cvs before 1970 - 46mm is identical to the original.

This fabric reinforced rubber strap is a perfect reproduction of the original clamps. It designed to hold the wires for the electrics just like when they left the factory.

USA original sheathed electrical circuit wiring, delivered with connectors, cable grommets and instructions in English with diagrams.

For VW Karmann-Ghia Type 14 Coupé and Cabriolet
Years: 08/1960 ->07/1965
Chassis: 3192 507 ->145 999 000.

Injector adapter wiring harness for Audi A4 (B7)
For Audi A4 (B7) :- 1.9 TDI 116hp (BKE, BRB)- 2.0 TDI 140hp (BPW)
Complete wiring harness for 4 injectors

Roadloisirs has chosen for you a specific hitch harness with a 7-pin plug. This allows you to connect your trailer, bicycle rack and/or caravan to your vehicle. your vehicle in accordance with the recommendations of your manufacturer.

For BMW SERIES 3 (type E90) Sedan
Manufacturing dates: From 02 /2004 to 09/2008

Characteristics of the wiring:

- Connection to the at the back and at the front the front
- Passage through suitcase required: No
- Deactivation of PDC (parking assistance): Yes
- Average time for assembly: 90 minutes