Oil hose

This engine lubrication tube for Mehari is of superior quality.

This cupro-nickel lubrication tube is faithful to the original, it allows the supply of oil to both cylinder heads for all models with 435 or 602cc engines.

This double engine lubrication system gasket for AMI6 and AMI8 cars is true to the original.
It seals the 7mm banjo bolts in the lubrication system on all 2cv models and derivatives with 602cc engines.

This double motor lubrication pipe for AMI 6 and AMI 8 cars is high quality.

This cupro-nickel lubrication pipe is faithful to the original, supplying the oil to both cylinder heads in all models.

Oil line on oil filter holder for 1972 Porsche 911 type F 2.4S :
- 1972 911 2.4 S

Engine oil drain hose for 1974 Porsche 911 type G 2.7 :
- 911 2.7 from 1974

Oiler hose for Porsche 911 2.7 :

- 911 2.7 of 1974
- 911 2.7 S of 1974
- 911 Carrera 2.7 from 1974 to 1976

Between engine and oil regulator.

Rigid oil hose for Porsche :

- 911 2.7 from 1974
- 911 2.7 S from 1974
- 911 Carrera 2.7 from 1974 to 1976

Crankcase hose

This engine lubrication tube for DYANE and Acadiane with 435 and 602cc engines is of superior quality.

This cupro-nickel lubrication tube is faithful to the original, it allows the supply of oil to both cylinder heads for all models with 435 or 602cc engines.

This 2cv engine lubrication system double gasket is true to the original.
It seals the 7mm banjo bolts of the lubrication system for all 2cv models and derivatives with 602cc engine.

This engine lubrication tube for 2cv and derivatives with 435 and 602cc engines is of superior quality.

This cupro-nickel lubrication tube is faithful to the original, it allows the supply of oil to both cylinder heads for all models with 435 or 602cc engines.

Turbooilhose for Mini R55 :
Mini R55 Clubman:
- Cooper S 1.6L 175hp from 10/2006 to 07/2010 (engine code N14B16)- Cooper S JCW 1.6L 211hp from 11/2007 to 07/2010 (engine code N14B16)- Cooper S 1.6L 184hp from 06/2009 to 06/2014 (engine code N18B16)- Cooper S JCW 1.6L 211hp from 01/2010 to 06/2012 (engine code N14B16)- Cooper S JCW 1.6L 211hp from 11/2011 to 06/2014 (engine code N18B16)
Supplied without copper gaskets.
We recommend that you replace the copper gaskets on the banjo fittings of the oil pipe when replacing it, to avoid leaks after reassembly (dimension A12X17-CU, 2 per banjo, i.e. 4 in total).

Rubber bent hose for oil breather
attached between oil filler and dry air filter
(model with rectangular paper cartridge).
Quality equivalent to VW original.

For VW Cox (10/1972-)

Upper oil breather hose between oil pan and connector for Porsche 911 type 993 from 1994 to 1998 :

- 993 3.6 - 272hp (M64.05/06/07/08) Carrera from 1994 to 1995
- 993 3.6 - 272hp (M64.05/07) Carrera 4 from 1995
- 993 3.6 - 285hp (M64.21/22/23/24) Carrera and Carrera S from 1996 to 1998
- 993 3.6 - 285hp (M64.21/23) Carrera 4 and Carrera 4S from 1996 to 1998
- 993 3.8 - 300hp (M64.20) Carrera RS from 1995 to 1996
- 993 3.6 - 408hp (M64.60) Turbo from 1995 to 1998
- 993 3.6 - 450hp (M64.60S) Turbo S from 1997 to 1998
- 993 3.6 - 430hp (M64.60R) GT2 from 1996 to 1998

Breather hose for Porsche 928 from 1987 to 1995 :

- 928 S4 5.0 - 320 hp (M28.41/M28.42) from 1987 to 1991
- 928 GT 5.0 - 330 hp (M28.47) from 1989 to 1991
- 928 GTS 5.4 - 350 hp (M28.49/M28.50) from 1992 to 1995

Breather pipe between oil separator and engine for Porsche 911 type 997 from 2005 to 2008 :

- 997 phase 1 3.8 - 355 hp (M97.01) Carrera S from 2005 to 2008
- 997 phase 1 3.8 - 355 hp (M97.01) Carrera 4S from 2005 to 2008

Suitable for a VOLKSWAGEN Transporter T25:
- 1.6 Turbo-diesel engine 70hp (JX)

Grooved diameter: 12 mm
Thread diameter: 16 mm

Straightunion for interior diameter oil pipe: 12 mm

Flexible oil hose on rigid turbo hose for Porsche 911 type 930 and 964 turbo from 1975 to 1992 :
Porsche 911 type G :
- 911 Turbo 3.0 from 1975 to 1977- 911 Turbo 3.3 from 1978 to 1989
Porsche 964 :
- 964 3.3 - 320hp (M30.69 only) Turbo from 1991 to 1992

Oil hose for Porsche 930 from 1978 to 1989 :
- 911 3.3 Turbo from 1978 to 1989
Hose from engine to oil regulator.

Stainless steel bracket
Can be fitted to engine crankcase studs, engine panel screws, frame screws on side members, or anywhere else you like, thanks to the 8mm center hole.
Holds hoses to external radiators or oil filters, for example.
Inside diameter 20.5 mm.