Screws - Fixations

Eccentric washer for front lower arm adjustment screw for Mazda RX8

For RX-8 all models from 2003 to 2012

Washer that goes with screw part no.RX02780 for securing the front lower arm of the rear axle


Original MAZDA part

Mazda RX-8 front lower suspension ball joint nut

For RX-8 all models from 2003 to 2012

enables you to attach the ball joint on the lower front linkage to the hub carrier
One nut required per linkage

Sold individually
Genuine Mazda part

This front axle mounting kit is a set of parts designed to properly secure and hold the vehicle's front axle. The kit typically includes various fastening components that are essential to ensure a stable and secure installation of the front axle, which includes suspension arms, shock absorbers, wheel pivots, and other key steering and suspension components.The kit includes 8 shims/spacers, 8 screws and washers for securing the front axle to the body.Suitable for VW Combi Split and Bay Window from 1950 to 07/1979.

This rear wheel chock on the chassis for Meharis - Aluminium is high quality.

This cast aluminium rear axle spacer raises the rear axle by 1cm to clear the body.

Rear upper linkage attachment nut for Mazda MX-5 NA, NB and NBFL

For NA, NB and NBFL all models

Used to attach the rear upper linkage screw

See diagram
3 nuts required per linkage

Sold individually
Genuine Mazda part

This rear wheel chock on the chassis for 2cv vans - Aluminium is high quality.

This cast aluminium rear axle spacer raises the rear axle by 1cm to clear the body.

Upper linkage screw for Mazda RX8

For RX-8 all models from 2003 to 2012

Allows the upper front linkage to be attached to the cradle

2 screws required per linkage
Sold individually

Genuine Mazda part

Suspension screw no. 86 for Mazda MX-5 NC and NCFL

- Suitable for both right and left
- Used to attach the front lower longitudinal arm on the rear suspension ref: MX15589, need two screws
- Used to attach the right rear upper suspension arm ref:MX26154, needs a screw
- Used to attach the left rear upper suspension arm ref:MX26156, needs a screw
Original MAZDA part
- Use nut ref: MX15640 for this

Seal on the upper or lower tube of the front axle body.

For VW Combi Split T1
Years: 1950 ->07/1967

Slant arm mounting bolts for cardan rear axle
Need 2 per car, left or right, sold individually.
Depending on the supplier, this screw can be screwed in with either a flat wrench or a BTR wrench.

Suitable for :
- Beetle 1302, 1303

Rear lower wishbone bolt nut for Mazda MX5 NA

For all MX-5 NA models

See diagram
For fixing the 3 rear lower wishbone bolts (2 frame-side and 1 wheel-side)

Requires 3 quantities per wishbone
Sold individually

Genuine Mazda part

Rear upper linkage bolt for Mazda MX-5 NA

for all MX-5 NA models

See diagram
3 screws required per linkage
Sold individually

Genuine Mazda part

Ball joint slotted nut for:
- 911 from 1969 to 1989
- 930
- 914

Rear suspension nut no. 91 for MX5 NC NCFL

- Used to attach the linkage on the rear suspension upper links ref: 26162 and MX26164
- Suitable for both sides of the car
- Original MAZDA part

Suspension ball joint screw for:
- 911 from 1969 to 1989
- 912 from 1969
- 914 from 1972 to 1976

Suspension ball joint nut for Citroën DS.
This M16x1.50 nylstop nut will tighten your upper and lower suspension ball joints on the front wheel hub of your Citroën DS.

Front lower arm to rear hub carrier clamp screw for Mazda RX-8

For RX-8 all models from 2003 to 2012

enables you to tighten the ball joint on the front lower arm to the rear hub carrier (see diagram)

1 screw required per side
Sold individually

Genuine Mazda part

Mounting bolt on front left or right-hand upper suspension arm. Dimensions: M12 x 1.5 x 105 mm. Soldper unit.

For Transporter T25/T3, 05/1979 ->07/1992
All models including Syncro version (4 x 4).

OE front sway bar clamps in stainless steel with screw closure. Quick and easy to install, these clamps are recommended for mounting original or large-diameter stabilizer bars, with original or urethane silentblocks. CSP quality.

For VW Beetle 1200, 1300, 1500
Buggy

Mazda MX-5 NB and NBFL wheel side lower rear linkage bolt

For all NB and NBFL models

See diagram
One screw required per linkage

Genuine Mazda part