Screws - Fixations

Nut for the rear lower arm adjustment eccentric screw on cradle for Mazda RX-8

For RX-8 all models from 2003 to 2012

enables you to attach the screw on the lower arm part no.RX02780

One nut required per side
Original MAZDA part

Protective cap on the rear wishbone mounting bolt for VOLKSWAGEN Transporter T25

Rear lower linkage bolt nut for Mazda MX-5 NB and NBFL

For all NB and NBFL models including sport chassis

Enables you to fit:

- The rear lower linkage screw MX15538 (wheel side)
- All front and rear eccentric screws MX10964 (frame side)
- The shock absorber on the lower front linkage
- The suspension ball joint on the lower front linkage

See diagrams
Sold individually

Genuine Mazda part

This rear wheel chock on the chassis for 2cv and derivatives - Aluminium is high quality.

This cast aluminium rear axle spacer raises the rear axle by 1cm to clear the body.

Self-locking nut for securing the suspension cradles of your MX5 NA NB NBFL

For all NA, NB and NBFL models

Allows the front and rear cradle to be attached to the body

4 nuts required per cradle ( 2 per side)

Genuine Mazda part

Outboard left stabilizer bar mounting kit for VW Combi Split up to 07/1967.

Suspension nut no. 88 for MX5 NC NCFL

- Used to attach the links on the MX26154 and MX26156 rear upper suspension arms
- Used at the front to attach the lower linkage ball joint ref: MX26170 and ref: MX26172
- Original MAZDA part

This rear wheel chock on the chassis for 2cvs before 1970 - Aluminium is high quality.

This cast aluminium rear axle spacer raises the rear axle by 1cm to clear the body.

Contents of the kit:
2 screws
Dimensions: M10 x 76mm
- Head diameter: 16mm

1 screw
Dimensions: M12 x 1.5 x 90mm
- Head diameter: 18mm
One per wishbone

Undercarriage fixing screws on the body
8 required per axle, sold individually
For VW Split Window and Bay Window Camper

Original VW Classic Parts unit

Rear lower linkage adjustment washer for Mazda RX-8

For RX-8 all models from 2003 to 2012

This eccentric washer fits on the rear screw of the lower front linkage RX02664
It is used to adjust the geometry of the front axle

One washer required per linkage
Original MAZDA part

Stabilizer bar mounting kit right outer side for VW Combi Split up to 07/1967.

Rear suspension nut no. 85 for MX5 NC NCFL

- Used to attach MX26154 and MX26156 rear upper suspension arms to the chassis
- Also used in conjunction with the MX15571 washer to adjust the longitudinal arms on the rear suspension
- Original MAZDA part
Fits all Mazda MX5 NC NCFL models

Front lower linkage adjustment washer for Mazda RX-8

For RX-8 all models from 2003 to 2012

This eccentric washer fits on the front screw of the front lower linkage RX02660
It is used to adjust the geometry of the front axle

One washer required per linkage
Original MAZDA part

Set of 2 "Cup" eccentrics with axle holes more offset than the original models. Allows fine-tuning to find the ideal camber with factory tolerances on a lowered front axle. Can be fitted in place of the original without modification.

For Beetle 1200, 1300, 1500 since 08/1965-> from chassis no.
from chassis No. 116 000 001->
models with ball joint front axle (supplied without ball joint).

Crossmember reverse lever adjusting screw for:
- 911 from 1965 to 1989
- 912
- 914

This rear wheel chock on the chassis for Dyanes and Acadianes - Aluminium is high quality.

This cast aluminium rear axle spacer raises the rear axle by 1cm to clear the body.

Rear suspension arm fitting nut for Mazda RX-8

For RX-8 all models from 2003 to 2012

enables you to attach the RX02788 eccentric screw and the RX02784 eccentric screw to the rear cradle

Sold individually
Genuine Mazda part

Suspension arm O-ring for Kombi from 08/1963 to 07/1967
Sold individually
Original VW part

Rear axle bolt for:
- 911 from 1974 to 1989
-924 from 1976 to 1988
- 944 from 1982 to 1991
- 968 from 1992 to 1995

Length of the threaded section : 25 mm
Total length: 38 mm
Fitted with a 24 mm spanner