Complete carburetor kit

Weber 32 DGR carburettor replacing the ozone

Weber 32 DGR carburettor replacing the ozone

Weber 32/34 DMTL carburettor replacing the Solex AA3

Weber 32/34 DMTL carburettor replacing the Solex AA3

Weber 32/34 DMTL carburettor kit for Land Rover

For Land Rover all models equipped with 2286cm3 engine:
- Land Rover Series III
- Defender 90 and 110

This Weber 32/34 DMTL 3/101 carburetor has been specifically developed by Weber to replace the original twin-body carburetor, and is fitted without any modification. It is fitted to the standard intake pipe, retaining the original air filter (unless a new filter is supplied).

The carburettor conversion kit brings a gain in fuel consumption and torque.
Supplied with everything you need for easy installation

Please note that if your vehicle is originally fitted with a Zenith 36 IV carburettor, you must choose part no. CAR502 on our website.

Weber 32/34 DMTL 6/1O1 carburettor replacing the OE one

Weber 2x32/36 DGEV carburettor replacing the 2xZenith INAT - Model fitted with an automatic choke

Weber 2x32/36 DGEV carburettor replacing the 2xZenith INAT - Model fitted with an automatic choke

This Weber 45 DCOE x 2 carburettor kit replaces the original carburettor.

This Weber 40 DCOE x 2 carburettor kit replaces the original carburettor.

Triple Weber 40 DCOE carburetor kit for Triumph TR6 PI

For Triumph TR6 PI 150hp with British origin fuel injection
For models with 23mm duct spacing. intake (must be measured beforehand)

This carburetor kit contains everything needed to replace the original Lucas injection with three genuine Weber 40 DCOE.
Installation is easy thanks to the custom intake pipes and the included synchronized linkage control. Weber triple carburetors will enhance the reliability and performance of your TR6.

This carburetor kit comes complete:
- 3 brand new Weber 40 DCOE carburetors
- Custom intake pipes
- Left and right hand drive control linkage
- Gaskets and hardware
- Weber tuning instructions

This Weber 40 DCOE x 3 carburettor kit replaces the original carburettor.

Water thermostat housing for Jaguar E-Type 3.8L and 4.2L produced between 1961 and 1971.

This thermostat housing is required when you change to a 3 carburettor WEBER double body kit (UC61340 kit) and if your engine is a 3.8L or 4.2L XK6. The original thermostat pipe will no longer fit.

For Jaguar:
- E-type 3.8L (1961-1971)
- E-type 4.2L (1961-1971)

Gain in performance and reliability by choosing the benchmark in horizontal carburetors! This complete carburetion kit is specially designed for Jaguars equipped with the XK engine featuring a type B cylinder head. The Weber 45 DCOE carburetors in this kit have 4 progression holes.

This kit will enable you to benefit from enhanced driving pleasure thanks to its flexibility and reliability.

Kit includes:
- 3 Weber 45 DCOE (with 4 progression holes)
- 1 intake manifold
- 1 complete linkage kit

Weber 45 DCOE carburetors are delivered with the following configuration:
- Venturi: 36mm
- Auxiliary venturi: 4.5
- Main jet: 145
- Air correction nozzle: 155
- Emulsion tube: F16
- Idle jet: 55F8
- Return jet: 45

Weber 32/36 DGEV carburettor replacing the Carter 1 BBL - Model fitted with an automatic choke

Complete Weber 32/36 DGV carburettor kit with manual starter specially designed for:
- Volvo B18 and B20 engines

This kit contains:
- Carburettor 32/36 DGV
- Inlet pipe
- Air filter
- Linkage

Weber 32/36 DGV Carburetor Kit for Land Rover

For Land Rover all models with 2.25L (2¼ liter) :
- Land Rover Series II and Series III
- Land Rover 90 and 110

Gain reliability, performance, and fuel economy by replacing your original carburetor with a genuine Weber carburetor.
Improved low-end torque and better acceleration, ideal for off-road use.
Mounts on all engines with a tubular exhaust manifold. If you still have your original exhaust manifold, it will be necessary to plug the unused hole with the new intake pipe (part not included).

This kit comes complete with mounting kit and instructions for aneasy installation.

Weber carburetor kitfor Land Rover

For Land Rover and Range Rover all models withV8 Rover 3.5L or 3.9L:
- Range Rover Classic
- Land Rover 90 and 110
- Land Rover Defender

Gain reliability, performance and fuel economy by replacing your stock carburetor with a true 4-body Weber carburetor.

A benchmark for over 20 years, this carburetor conversion kit designed by Weber improves low-end torque, offers better throttle response as well as a power gain of up to 30hp, ideal for off-road use.

This kit comes complete with mounting kit for easy installation :
- Brand new Weber carburetor
- Intake manifold
- Air filter and canister
- Control linkage
- Venting
- Hose fittings
- Fuel filter
- Gaskets and hardware

For vehicles with automatic transmissions, the UC60024 control linkage
needs to be ordered in addition.

Weber carburetor kit for Rover V8

For Rover V8 engine all models 3.5L or 3.9L
This engine has been fitted to many British cars such as Land Rover, MGB, Triumph, TVR, Morgan, Ginetta, as well as small production vehicles such as AC Cobra Replicas

Gain in reliability, performance and fuel economy by replacing the original carburetor on your Rover V8 engine with a true 4-body Weber carburetor.
A benchmark for over 20 years, this carburetor conversion kit designed by Weber improves low-end torque, offers better throttle response as well as a power gain of up to 30hp

This kit comes complete with mounting kit for easy installation :
- New Weber carburetor
- Specific intake manifold
- Air filter and canister
- Control linkage
- Venting
- Hose fittings
- Fuel filter
- Gaskets and hardware

For vehicles with automatic transmissions, the UC60024 kickdown control linkage must be ordered as an additional item.

Complete Weber 34 ICH carburretor kit replacing the original Solex 35 PDSIT

For the following versions:

Audi 80

- 1297 cc 1972-78
- 1272 cc 1978-79
- 1471 cc 1974-75
- 1588 cc 1975-79

Volkswagen Passat

- 1297 cc 1974-77
- 1272 cc 1978-80
- 1471 cc 1972-75
- 1588 cc 1975-81