Complete carburetor kit

Weber carburettor kit for MGB 1800

This kit entirely designed by Weber enables you to replace the original SU carburettor by a Weber 45 DCOE, the benchmark carburettor in terms of reliability and performance

Kit contents:
- A pre-configured Weber 45 DCOE Carburettor for MGB
- A specially designed intake pipe for the DCOE
- A choke cable
- Complete linkage

Weber 34 ICH carburettor replacing the Ford IV

Weber carburetor kit 32/36 DGV for Suzuki Vitara / Escudo

For Suzuki Vitara / Escudo 1.6 all carbureted models

This Weber 32/36 DGV carburetor is specifically developed by Weber to replace the stock carburetor and mounts without any modifications to the stock intake pipe.

The carburetor conversion kit provides fuel economy and torque gains.
Provided with everything needed for an easyinstallation

Carburator with manual starter (cable provided)
Sold with an air duct for connection to a Snorkel

Weber 32/34 DMTL carburettor replacing the Pierburg 2E2 - Model fitted with an automatic gearbox

Weber 32/34 DMTL carburettor replacing the Pierburg 2E3 - Model fitted with a manual gearbox

Weber 34 ICH carburettor replacing the Ford IV

Weber 32/34 DMTL carburettor replacing the Pierburg 2E3 - Model fitted with a manual gearbox

Weber 32/34 DMTL carburettor replacing the Zenith 2B4 - Model fitted with a manual gearbox

Gain in performance and reliability by opting for the benchmark in horizontal carburetors! Carburetor kit specially designed for Jaguar XK 3.8L and 4.2L 6-cylinder engines as fitted to the Jaguar Type-E.

The carburetors are configured and adjusted for open road use. The carburetors are configured and tuned for open-road use, and feature 4 progressive holes for excellent driveability.

The carburetors are supplied with 62mm long cones.
Once assembled, the width of this kit with intake pipe, carburetors and horns is 297mm.

The intake manifold is designed to fit the water thermostat housing of the Jaguar E-Type Series 3 (1971-1975). Installation on other 3.8L and 4.2L models is also possible, but it will be necessary to opt for the UC61350 thermostat housing in order for the intake pipe to fit properly.

Kit includes:
3 x 45 DCOE 152G Weber (4 progression holes)
1 x inlet pipe
1 x Linkage kit

Weber 32/36 DGAV carburettor replacing the GM Varajet ll - Model fitted with an automatic gearbox

Weber 32/36 DGV carburettor replacing the Zenith 35/40 INAT

This Weber 32/36 DGEV x 2 carburettor kit replaces the original carburettor.

Weber 34 ICH carburettor replacing the Solex 31 PICT
If the carburettor support plate is equipped with 2 dowels.

Weber carburetor kit for Rover V8

For Rover V8 engine all models 3.5L or 3.9L
This engine has been fitted to many British cars such as Land Rover, MGB, Triumph, TVR, Morgan, Ginetta, as well as small production vehicles such as AC Cobra Replicas

Gain in reliability, performance and fuel economy by replacing the original carburetor on your Rover V8 engine with a true 4-body Weber carburetor.
A benchmark for over 20 years, this carburetor conversion kit designed by Weber improves low-end torque, offers better throttle response as well as a power gain of up to 30hp

This kit comes complete with mounting kit for easy installation :
- New Weber carburetor
- Specific intake manifold
- Air filter and canister
- Control linkage
- Venting
- Hose fittings
- Fuel filter
- Gaskets and hardware

For vehicles with automatic transmissions, the UC60024 kickdown control linkage must be ordered as an additional item.

Weber 32/36 DGAV carburettor replacing the Weber 32/36 DGAV - Model fitted with an automatic choke

Weber 32/34 DMTL carburettor replacing the Aisan V - Model fitted with an automatic gearbox

Weber carburettor kit for Land Rover

For all Land Rover models equipped with 2286cm3 engine and original Zenith 36 IV carburettor:
- Land Rover 88/109 Series II, IIA and III


This Weber 34 ICH carburettor has been specifically developed by Weber to replace the Zenith carburettor and can be fitted without any modification. It is fitted to the standard intake pipe, retaining the original air filter (unless a specific filter is supplied).

The carburetor conversion kit provides fuel economy and torque gains.
Supplied with everything needed for easy installation.

Weber 32/34 DMTL carburetor kit for Volkswagen Golf 2
For VW Golf 2 from 1983 to 1990:- All 1.3 models fitted with a Pierburg 2E3 carburetor
The WEBER 32 / 34DMTL twin-barrel progressive carburetor is more reliable and more efficient than the original Pierburg 2E3.
This version with manual choke lets you forget about the vagaries of the automatic choke, which no longer activates or constantly enriches the mixture. It's the perfect way to make sure you pass your next roadworthiness test so you can enjoy the warm weather!
In addition to the twin-barrel carburetor, this complete kit includes an adapter plate for the original intake manifold, plus all the gaskets and nuts and bolts required for installation.
Original WEBER parts

Weber 32/36 DGAV carburettor for Capri Pinto fitted with an automatic choke

Weber 34 DCHD carburettor replacing the Polmo 34 DCMP