Complete carburetor kit

Weber 34 ICH carburettor replacing the Solex 35 PDSIT

Weber 34 ICH carburettor replacing the Solex 35 PDSIT

Weber 34 ICH carburettor replacing the Solex 35 PDSIT

Weber carburetor kitfor Land Rover

For Land Rover and Range Rover all models withV8 Rover 3.5L or 3.9L:
- Range Rover Classic
- Land Rover 90 and 110
- Land Rover Defender

Gain reliability, performance and fuel economy by replacing your stock carburetor with a true 4-body Weber carburetor.

A benchmark for over 20 years, this carburetor conversion kit designed by Weber improves low-end torque, offers better throttle response as well as a power gain of up to 30hp, ideal for off-road use.

This kit comes complete with mounting kit for easy installation :
- Brand new Weber carburetor
- Intake manifold
- Air filter and canister
- Control linkage
- Venting
- Hose fittings
- Fuel filter
- Gaskets and hardware

For vehicles with automatic transmissions, the UC60024 control linkage
needs to be ordered in addition.

Weber carburetor kit for Rover V8

For Rover V8 engine all models 3.5L or 3.9L
This engine has been fitted to many British cars such as Land Rover, MGB, Triumph, TVR, Morgan, Ginetta, as well as small production vehicles such as AC Cobra Replicas

Gain in reliability, performance and fuel economy by replacing the original carburetor on your Rover V8 engine with a true 4-body Weber carburetor.
A benchmark for over 20 years, this carburetor conversion kit designed by Weber improves low-end torque, offers better throttle response as well as a power gain of up to 30hp

This kit comes complete with mounting kit for easy installation :
- New Weber carburetor
- Specific intake manifold
- Air filter and canister
- Control linkage
- Venting
- Hose fittings
- Fuel filter
- Gaskets and hardware

For vehicles with automatic transmissions, the UC60024 kickdown control linkage must be ordered as an additional item.

Complete Weber 34 ICH carburretor kit replacing the original Solex 35 PDSIT

For the following versions:

Audi 80

- 1297 cc 1972-78
- 1272 cc 1978-79
- 1471 cc 1974-75
- 1588 cc 1975-79

Volkswagen Passat

- 1297 cc 1974-77
- 1272 cc 1978-80
- 1471 cc 1972-75
- 1588 cc 1975-81

Complete Weber 32/36 DGV carburettor kit with manual starter specially designed for:
- Volvo B18 and B20 engines

This kit contains:
- Carburettor 32/36 DGV
- Inlet pipe
- Air filter
- Linkage

Weber carburettor kit for MGB 1800

This kit entirely designed by Weber enables you to replace the original SU carburettor by a Weber 45 DCOE, the benchmark carburettor in terms of reliability and performance

Kit contents:
- A pre-configured Weber 45 DCOE Carburettor for MGB
- A specially designed intake pipe for the DCOE
- A choke cable
- Complete linkage

2 Weber 44 IDF carburetors conversion kit for Porsche 914-4 :

- 914-4 1.7 - 80 hp (022-W) from 1970 to 1973
- 914-4 1.7 - 80 hp (022-EA) from 1972 to 1973
- 914-4 1.7 - 72 hp (022-EB) from 1972 to 1973
- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976
- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976
- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974
- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976
- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976

This set includes :

- 2 real Weber 44IDF carburettors
- 2 intake manifolds
- 2 air filters
- The linkage, gaskets, screws, nuts and agreements

This Weber MGB V8 3.5 500 CFM carburettor kit replaces the original carburettor.

Weber 32/34 DMTL carburetor kit for Volkswagen Golf 2
For VW Golf 2 from 1983 to 1990:- All 1.3 models fitted with a Pierburg 2E3 carburetor
The WEBER 32 / 34DMTL twin-barrel progressive carburetor is more reliable and more efficient than the original Pierburg 2E3.
This version with manual choke lets you forget about the vagaries of the automatic choke, which no longer activates or constantly enriches the mixture. It's the perfect way to make sure you pass your next roadworthiness test so you can enjoy the warm weather!
In addition to the twin-barrel carburetor, this complete kit includes an adapter plate for the original intake manifold, plus all the gaskets and nuts and bolts required for installation.
Original WEBER parts

Gain in performance and reliability by opting for the benchmark in horizontal carburetors! Carburetor kit specially designed for Jaguar XK 3.8L and 4.2L 6-cylinder engines as fitted to the Jaguar Type-E.

The carburetors are configured and adjusted for open road use. The carburetors are configured and tuned for open-road use, and feature 4 progressive holes for excellent driveability.

The carburetors are supplied with 62mm long cones.
Once assembled, the width of this kit with intake pipe, carburetors and horns is 297mm.

The intake manifold is designed to fit the water thermostat housing of the Jaguar E-Type Series 3 (1971-1975). Installation on other 3.8L and 4.2L models is also possible, but it will be necessary to opt for the UC61350 thermostat housing in order for the intake pipe to fit properly.

Kit includes:
3 x 45 DCOE 152G Weber (4 progression holes)
1 x inlet pipe
1 x Linkage kit

This Weber 32/36 DGEV x 2 carburettor kit replaces the original carburettor.

Complete set of 2 Weber 45 DCOE carburettors enabling you to replace the original Solex carburettors in your BMW 2002.

The conversion to a Weber 45 DCOE carburettor enables you to optimise the performance and reliability of your E10.

The kit includes:
- 2 Weber 45 DCOE carburettors
- 1 intake pipe
- 1 complete linkage kit
- 2 flanges for carburettor
- An adjustment manual

This Weber DGAV x 1 carburettor kit replaces the original carburettor.

Weber 32/36 DGV carburetor kit for MG Midget 1500

For MG Midget 1500 (1493cm3) from 1974 to 1979

This Weber 32/36 DGV carburetor is specifically developed by Weber to replace the original carburetor and is fitted without any modification using the specific intake pipe supplied.

The carburettor conversion kit saves fuel and torque.

Supplied with everything needed for easy installation:
- Pre-configured Weber 32/36 DGV carburettor
- Specific intake pipe
- Air filter
- Gaskets and assembly kit

Carburetor with manual choke

Weber 32/36 DGV carburetor kit for Triumph Spitfire 1500

For Spitfire 1500 (1493cm3) from 1974 to 1980

This Weber 32/36 DGV carburettor is specifically developed by Weber to replace the original carburettor and is fitted without any modification using the specific intake pipe supplied.

The carburettor conversion kit saves fuel and torque.

Supplied with everything needed for easy installation:
- Pre-configured Weber 32/36 DGV carburettor
- Specific intake pipe
- Air filter
- Gaskets and assembly kit

Carburetor with manual choke (cable supplied)

This Weber DGAV x 1 carburettor kit replaces the original carburettor.

Weber 34 IBF carburettor replacing the Ford VV - Model fitted with a manual gearbox

Weber 32/36 DGAV carburettor replacing the Weber 32/36 DGAV - Model fitted with an automatic choke