Ignition coil

RIDEX ignition coil for BMW X5 :

Bmw X5 E70 :- 3.0Si 6cyl 272hp from 05/2006 to 03/2010 (engine code n52b30n)
- 4.8i 8cyl 355hp from 05/2006 to 03/2010 (engine code N62N)
- X5 M 8cyl 555hp from 07/2008 to 06/2013 (engine code s63)
Bmw X5 E70 Lci : - 35IX 6cyl 306hp from 04/2009 to 06/2013 (engine code n55 Turbo)
- 40IX 6cyl 306hp from 01/2012 to 06/2013 (engine code n55 Turbo)
- 50iX 8cyl 408hp from 04/2009 to 06/2013 (engine code n63)

For models with connectors with coding in central position, please check on your vehicle before ordering.

Sold individually.
Need oneignition coil per cylinder.

These black coil holders for Citroën AMI6 and AMI8 offer flexibility for easy installation and maintenance of the coil.
The softness of the material partially insulates the coil from vibrations, protecting it from shocks that could damage it.
These brackets, sold in pairs, are compatible with 6V and 12V dry or oil bath coils.
Be careful, these supports are not compatible with Dyanes and Acadianes.

This white reel stand for AMI6 and AMI8 (04/19617-03/1979) is model specific.

This reel stand for AMI6 and AMI8 is stiffer and slightly more angled than conventional stands to accommodate the lower hood lines of the AMI6 and AMI8.

This 6V coil for AMI 6 (04/1961-06/1966) is compatible with the first AMI 6 in 6V.This ignition coil for AMI 6V is oil bath. Fragile it can heat up because of the proximity of the engine. Any good dechuchist will have a spare one to be able to restart hot after a long ride.

Ridexignition coil for Peugeot 306 S16 167cvs (1997-2001)
Pencil coil with spark plug terminal
Assignments :- 306 S16 - 2.0 16V 1998cm3 155hp (XU10J4R) ACAV phase 1 from 1993 to 1994- 306 S16 - 2.0 16V 1998cm3 150hp (XU10J4R) ACAV phase 1 from 1994 to 1997

JP GROUP ignition coil for Volkswagen Golf 6
For VW Golf 6 :- 1.8 TSI 160hp ( CDAA)- GTI 2.0 TSI 211hp (CCZB)- GTI EDITION 35 2.0 TSI 235hp (CDLG)- R 2.0 TSI 4Motion 256hp (CDLC, CRZA)- R 2.0 TSI 4Motion 265hp (CDLA)- R 2.0 TSI 4Motion 270hp (CDLF)
Pencil coil, one per cylinderSold individually

Chrome-plated PERTRONIX FLAME THROWER ignition coil 40000 Volts, 3 Ohms, 12V recommended for Ignitor 1 Kit
High-efficiency coil: 40,000 VoltsResistance: 3 ohmsVoltage: 12 VoltsFinish: chrome-platedDimensions: 150 x 55 mm
Better sparks = performance and fuel economy!Compatible only with IGNITOR 1 kit
Do not use with platinum-plated screws or on special vehicles running at continuously low revs.

NGK ignition coil for Volkswagen Transporter T6
For VW T6 :- 2.0 TSI 150hp (CJKB)- 2.0 TSI 204hp (CJKA)
Pencil coil, one per cylinderSold individually

These black coil supports for Citroën 2cv offer flexibility for easy installation and maintenance of the coil.
The softness of the material partially isolates the coil from vibrations, protecting it from shocks that could damage it.
Sold in pairs, these brackets are compatible with 6V and 12V dry or oil-bath coils.
Please note that they are not compatible with Dyanes and Acadianes.

Bosch type ignition coil holder for Porsche 911 type F and 912 from 1965 to 1968 :

- Porsche 911 type F :

- 911 2.0 from 1965 to 1967
- 911 2.0 S from 1967
- 911 2.0 T / L / S from 1968

- Porsche 912 :

- 912 1.6 - 90 hp (616.36) from 1966 to 1968

Material: galvanized zinc

Bosch type ignition coil holder for Porsche 356 Pre-A, A, B and C from 1950 to 1965 :

- 356 Pre-A from 1950 to 1955
- 356 A from 1956 to 1959
- 356 B T5 and T6 from 1960 to 1963
- 356 C from 1964 to 1965

Material: galvanized zinc

Bosch ignition coil holder for Porsche 914-4 from 1970 to 1976 :

- 914-4 1.7 - 80 hp (022-W) from 1970 to 1973
- 914-4 1.7 - 80 hp (022-EA) from 1972 to 1973
- 914-4 1.7 - 72 hp (022-EB) from 1972 to 1973
- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976
- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976
- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974
- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976
- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976

Material: galvanized zinc

These black coil holders for Citroën 2cv A-AZAM offer flexibility for easy installation and maintenance of the coil.
The softness of the material partially insulates the coil from vibrations, protecting it from shocks that could damage it.
These brackets, sold in pairs, are compatible with 6V and 12V dry or oil bath coils.
Be careful, these supports are not compatible with Dyanes and Acadianes.

Beru 12Vignition coil for Mercedes 280 W116

Assignments :- Mercedes 280 S 116.020 09/1972 to 07/1980 6 cylinders 2.8L 160hp (M 110.922) Sedan - Mercedes 280 SE 116.024 08/1972 to 06/1975 6 cylinders 2.8L 182hp (M110.983) Sedan - Mercedes 280 SE 116.024 07/1975 to 07/1980 6 cylinders 2.8L 177hp (M110.985) Sedan - Mercedes 280 SEL 116.025 08/1972 to 06/1975 6 cylinders 2.8L 182hp (M110.983) Limousine - Mercedes 280 SEL 116.025 07/1975 to 07/1980 6 cylinders 2.8L 177hp (M110.985) Limousine

Beru 12Vignition coil for Mercedes 280 SE W111

Assignments :
W111 :- Mercedes 280 SE Coupé 111.024 11/1967 to 05/1971 6 cylinders 2.8L 160hp (M 130.980) Coupé - Mercedes 280 SE 3.5 Coupé 111.026 11/1969 to 07/1971 6 cylinders 3.5L 200hp (M 116.980) Coupé- Mercedes 280 SE Cabriolet 111.025 11/1967 to 05/1971 6 cylinders 2.8L 160hp (M 130.980) Cabriolet - Mercedes 280 SE 3.5 Cabriolet 111.027 11/1969 to 07/1971 8 cylinders 3.5L 200hp (M 116.980) Cabriolet

These black coil holders for Citroën 2cv Van offer flexibility for easy installation and maintenance of the coil.
The softness of the material partially insulates the coil from vibrations, protecting it from shocks that could damage it.
These brackets, sold in pairs, are compatible with 6V and 12V dry or oil bath coils.
Be careful, these supports are not compatible with Dyanes and Acadianes.

BOSCH ignition coil for Audi A4 B7
For Audi A4 (B7) :- 1.6 102hp (ALZ)
Original BOSCH quality

BERU ignition coil for Porsche Cayenne type 9PA S, Turbo and Turbo S phase 1 from 2003 to 2006 :

- 955 Cayenne S V8 4.5 - 340 hp (M48.00) from 2003 to 2006
- 955 Cayenne Turbo V8 4.5 - 450 hp (M48.50) from 2003 to 2006
- 955 Cayenne Turbo S V8 4.5 - 521 hp (M48.50) from 2006

The coil is sold individually , and 8 quantities are required for the V8.

BERU ignition coil for Porsche Cayenne type 9PA V6 from 2003 to 2010 :

- 955 Cayenne V6 3.2 - 250 hp (M02.2Y) from 2003 to 2006
- 957 Cayenne V6 3.6 - 290 hp (5501) from 2007 to 2010

The coil is sold individually , and 6 quantities are required for the V6.

BOSCH or BERU depending on availability

This coil is also suitable for electronic ignitors