Ignition harness

BOUGICORD spark plug wires for 2cv Van (1951-1978) are of the same quality as the original.

Until 1983, spark plug shafts required a blanking plate to ensure that the spark plug connection was water and dust tight.
This Bougicord quality 2cv ignition wire set adheres completely to the performance and look of the original.

Red high performance ignition wire set for Mazda MX-5 NB and NBFL

NB all models (1998-2000)
NBFL 1.6L only (2001-2005)

High quality red silicon wire set with Beru connectors, withstands temperature over 260°C
A perfect alternative to the fragile OEM wire set

Spark plug wires for Mehari up to 1983 are a reproduction of the original.

Up to 1983, spark plug shafts require a plug to ensure water and dust tightness of the spark plug connector.
The quality of this ignition wire set offers good performance and respect for the original look.

SASIC spark plug wire kit for Peugeot 106 1.6 XSI and 1.6 Rallye
Genuine French parts
Complete kit including the 4 spark plug wires and the wire connecting the coil to the igniter.
Assignments :-106 Rallye - 1.6 TU5J2 (NFW) 1994 - 1996 -103hp-106 XSI - 1.6 TU5J2 (NFY) 1994 - 1996 -105hp

Spark plug wire kit for Mercedes 300-24 W124
Complete harness with 6 spark plug wires and wire connecting igniter and coil
Quality silicone parts resistant up to 220°c
For Sedan, Coupé, Cabriolet and Estate
Assignments :- Mercedes 300 E-24 124.031 08/1989 to 10/1992 6 cylinders 3.0L 231hp (M 104.980) Sedan phase 2- Mercedes 300 TE-24 124.091 09/1989 to 10/1992 6 cylinders 3.0L 231hp (M 104.980) Estate phase 2- Mercedes 300 CE-24 Coupé 124.051 08/1989 to 11/1992 6 cyl 3.0L 231hp (M 104.980) Coupé phase 2 - Mercedes 300 CE-24 Convertible 124.061 03/1992 to 07/1993 6 cyl 3.0L 231hp (M 104.980) phase 2

For a VOLKSWAGEN Transporter T5:
- 2.0 Petrol engine 115hp (AXA)

Blackignition wire diameter 7 mm.Original BOSCH MEXICO quality.
For VW Cox, Karmann-Ghia, Type 3, Combi with Type 1 engines: 1200, 1300, 1500, 1600cc

Spark plug wires for 2CV A-AZ-AZAM are a reproduction of the original.

Until 1983, spark plug shafts required a blanking plug to ensure water and dust tightness of the spark plug connector.
The quality of this ignition wire set offers good performance and respect for the original look.

For Polo 86 / 86C:
- 1.05 45hp (AAK, AAU, ACM)
- 1.05 50hp (HZ)
- 1.3 54hp and 55hp (2G, AAV, MH, NZ)
- 1.3 75/78hp (3F)
- 1.3 G40 115hp (PY)

The spark plug shaft plug for Mehari until 1983 - HNBR is installed directly on the spark plug wire and plugs the spark plug shaft.

It insulates the spark plug from dust and moisture, making it easier to start. Its HNBR (Hydrogenated Nitrile Rubber) elastomer material offers superior resistance to engine heat and allows it to last longer than standard rubber.

Cylinder head mountedspark plug wire holder for Citroën DS.
This ignition wire holder will tidy up the engine bay.
Compatible with all Citroën DS models.

Set of spark plug wires for CB Perf Magnaspark II ignition distributor.

For Golf4:
- 1.4 75hp (AHW, AKQ, APE, AXP, BCA)
- 1.6 105hp (AZD, AUS, ATN)

For New Beetle:
- 1.6 100hp (AWH)

The small nozzle screwed into the end of the spark plugs is to be kept for connection with this spark plug wiring harness

Sparkplug extension for Citroën ID.
The spark plug extension for Citroën ID is a special part that extends access to the spark plug, which is deeply recessed in the cylinder head.
Compatible with all Citroën ID models.

Complete harness with 6 spark plug wires including the main wire for 5 cylinder petrol engines

For a VOLKSWAGEN Transporter T4 from 1996 to 2003
since chassis 70-T-000 001->

Complete spark plug wire harness for BMW 5 series E28 4 cylinders :
- 518 carburettor manual gearbox 90hp from 11/1980 to 09/1984 (engine code M10B18)- 518i injection 105hp from 05/1981 to 12/1987 (engine code M10B18)
With soft rubber coil protection.German quality wiring harness.
This ignition wire set will replace the original part for optimum performance!

For Polo 6N2 :
- 1.4 75cv (AHW, APE, AUA)

For Golf 3 and Passat 3:
- 2.0 GTi 16s 150hp (ABF)

Spark plug wire kit for Mercedes 200-300 W124
For Sedan, Coupé and Estate
Quality silicone parts, resistant up to 220°c
Assignments :
Sedan :- Mercedes 200 124.020 01/1985 to 08/1989 4 cylinders 2.0L 109hp (M 102.922) Sedan phase 1- Mercedes 200 124.020 09/1989 to 06/1990 4 cylinders 2.0L 109hp (M 102.922) Sedan phase 2- Mercedes 230 E 124.023 01/1985 to 08/1989 4 cylinders 2.3L 136hp (M 102.982) Sedan phase 1- Mercedes 230 E 124.023 09/1989 to 10/1992 4 cylinders 2.3L 136hp (M 102.982) Sedan phase 2
Coupé :- Mercedes 230 CE 124.043 04/1987 to 08/1989 4 cylinders 2.3L 136hp (M 102.982) Coupé phase 1 - Mercedes 230 CE 124.043 09/1989 to 09/1992 4 cylinders 2.3L 136hp (M 102.982) Coupé phase 2
Estate :- Mercedes 200 T 124.080 11/1985 to 08/1989 4 cylinders 2.0L 109hp (M 102.922) Estate phase 1 - Mercedes 200 T 124.080 09/1989 to 05/1990 4 cylinders 2.0L 109hp (M 102.922) Estate phase 2- Mercedes 230 TE 124.083 01/1985 to 08/1989 4 cylinders 2.3L 136hp (M 102.982) Estate phase 1 - Mercedes 230 TE 124.083 09/1989 to 10/1992 4 cylinders 2.3L 136hp (M 102.982) Estate phase 2