Ignition harness

BERU ignition wire for Porsche 924 Turbo from 1981 :

- 924 2.0 Turbo - 177 hp (M31.03) from 1981 to 1985

This clamp is used to secure the spark-plug lead-through tube to the intake pipe.
Sold individually, 2 required

For VW Beetle, Karmann-Ghia and Combi Split with type 1 25 / 30 HP "cast foot" engine
Up to engine no.: 2 938 463

For A6 (C4) Saloon and Avant:
- 2.8 V6 193hp (ACK) including Quattro

BERU Spark plug wire bundle for Porsche 911 G-series :

-> Porsche 911:
- 911 3.0 SC from 1978 to 1983

-> Porsche 930:
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989

BOUGICORD spark plug wires for 2cv (1970-1983) are of the same quality as the original.

Until 1983, spark plug shafts required a blanking plate to ensure that the spark plug connection was water and dust tight.
This Bougicord quality 2cv ignition wire set adheres completely to the performance and look of the original.

Genuine Mazda MX-5 NA ignition wiring set

- MX5 NA 1.6 and 1.8 all models

An ageing coil/wiring/exhaust manifold assembly can quickly alter the quality of your ignition and affect the fuel consumption and the pollution created by your MX-5.
Mazda recommends replacing the wiring wiring every 30,000 km or 24 months

Includes the 4 wires connecting the spark plugs to the coil
German Quality

This BOUGICORD ignition wire set for Citroën DS (09/1965-1975) - Carburetor is of superior quality.

This high-voltage harness for DS includes the 4 spark plug wires and the coil wire. It is compatible with all carburetor models produced from 1966 onwards.

For E36:
- 316 i 01/93-> engine M43
- 318 i 01/93-> engine M43

Spark plug wires for 2CV Fourgonnette are a reproduction of the original.

Until 1983, spark plug shafts required a blanking plug to ensure water and dust tightness of the spark plug connector.
The quality of this ignition wire set offers good performance and respect for the original look.

M5 10/88-> engine S38

For A4 (B5) Saloon and Avant:
- 2.4 V6 163hp (AJG, AMM, APZ)
- 2.4 V6 165hp (AGA, ALF, AML, APS, ARJ)
- 2.8 V6 193hp (ACK, ALG, APR, AQD)
(including Quattro)

Suitable for :
- Golf 1 Cabriolet 1.6 & 1.8 Carbu & GLi 08/84 ->07/93

Spark plug wire harness for BMW 7 Series E32:

Bmw 7 Series E32 :

- 730i 6cyl 197hp from 02/1988 to 09/1988 (engine code m30b30)
- 730iL 6cyl 197hp from 02/1988 to 09/1988 (engine code m30b30)
- 735i 6cyl 220hp from 02/1988 to 09/1988 (engine code m30b35)
- 735iL 6cyl 220hp from 02/1988 to 09/1988 (engine code m30b35)

Technical specifications :
- 7 angled spigots on distributor side.
- Rigid plastic coil protector, diameter 3cm, exiting on N°3 spark plug wire.

Supplied with 3-pin plug.

ATTENTION: Not suitable for all m30 engines, please check year and month of production.

German qualityharness .

Singleanti-parasite plug, length 98 mm, to be mounted on the spark plug ignition wires of cylinders 2 or 4 on type 4 engines only for VW Transporter T25 from 05/1979 to 12/1982.Sold individually.

The interference suppression plug usually contains a resistor that limits the flow of electrical current to prevent the creation of interference. This resistor is often made of ceramic or metal, and may vary according to motor type and manufacturer's specifications.It is important to check the interference suppression plugs regularly when servicing the motor. If the resistor fails or the plug is worn, this can lead to ignition problems, engine misfiring or electromagnetic interference.
This single interference suppression plug, length 109 mm, is to be fitted to the spark plugs of cylinders 2 or 4 on Type 2 and Type 4 engines, and is suitable for VW Combi, Transporter T25 / T3 from 08/1967 to 12/1982.- engines: 1600, 1700, 1800, 2000 ccSold individually

For all models up to ->07/06

Valeoignition wire set for Mercedes E-Class 240-280-320 W210
Complete set of ignition wires to connect the coil to the spark plugs, original quality.
SAE connector
M4 diameter ignition coil connector.
Fits sedan and station wagon
Assignments :E 240 2.4 (210.261), Year of manufacture 06.1997 - 03.2003, 2398 ccm, 170 HPE 240 2.6 (210.262), build year 08.2000 - 03.2003, 2597 ccm, 170 HPE 280 2.8 (210.263), Year of construction 12.1996 - 03.2003, 2799 ccm, 204 HPE 280 2.8 4-matic (210.281), build year 12.1996 - 03.2003, 2799 ccm, 204 HPE 320 3.2 (210.265), build year 12.1996 - 03.2003, 3199 ccm, 224 HPE 320 3.2 4-matic (210.282), Year of construction 12.1996 - 03.2003, 3199 ccm, 224 HP

Blue cover on ignition wire set for Volkswagen Passat 6
For VW Passat B6 :- 3.6 299hp (BWS)
Only for cylinders 1, 3 and 5
Genuine Volkswagen part

Spark plug wire kit for Mercedes 300SL-24 R129
Complete harness with 6 spark plug wires and wire connecting igniter and coil
Quality silicone parts resistant up to 220°c
Assignments :- Mercedes 300 SL -24 129.061 03/1989 to 07/1993 6 cylinders 3.0L 231hp (M 104.981) Convertible

Assignments :

For Passat 5 Saloon (3B3) and Avant (3B6):
- 2.8 V6 190hp (BBG)
- 2.8 V6 193hp (AMX, ATQ)
(including 4Motion)