Windscreen bay

This front right - rear left convertible top attachment for 2cvs before 1970 - on windscreen bay is high quality.
The front right convertible top mounting bracket is located on the windscreen opening.
This electro-galvanised steel sheet is also used on the left rear to secure long tops.

This front left - rear right convertible top attachment for 2cvs before 1970 - on windscreen bay is high quality.
The left front convertible top mounting bracket is located on the windscreen bay.
This electro-galvanised steel sheet is also used at the right rear for securing long tops.

Complete air vent for 2cv vans from 1962 onwards - with gasket, cover and screws - faithful to the original.

This complete 2CV air damper enables you to replace this part which is very exposed to corrosion.

This set includes:
- the electro-galvanised steel shutter that needs painting
- the air damper gasket
- the polished aluminium hubcap and its nuts.

This air damper for 2cv vans from 1962 onwards is higher quality than the original.

Made of electro-galvanised steel, it has been given an electrolytic treatment for good protection against corrosion.

This air damper gasket only for 2cv vans keeps the air damper airtight.

it is compatible with all 2cv saloons and vans.

This control knob for 2cv vans - black is made of plastic.

Compatible with all 2cv saloon cars and vans, it controls the the ventilation flap opening, the manual windscreen wiper mechanism until 1962, as well as the height adjustment of the AMI6 and AMI8 cars headlights.

5 windshield bay clips for Mazda MX5 NA, NB and NBFL from 1998 to 2005.

This vent damper nut - M3 has a metric thread.

This vent damper nut - M3 has a metric thread.

This vent damper nut 2cv vans - M3 has a metric thread.

Tôle de réparation de baie de pare-brise inférieure pour Volkswagen Golf 1 Berline, Cabriolet et Caddy :

- Tous modèles du 02/1974 au 07/1993

Le bas de la baie de pare-brise est fortement soumis à la rouille au fil des années. Rares sont les modèles ne nécessitant pas son remplacement. Sa restauration demande de découper l'ancienne tôle.

INFORMATION : Cet embouti en métal permet la remise en état de la partie sous le pare-brise. Il n'est plus du tout disponible sur le marché. La pièce que nous livrons nécessite des ajustements et des corrections afin d'améliorer la finition et de s'adapter parfaitement à votre véhicule. Elle vous évite la reconstruction complexe de cette partie de carrosserie à partir de zéro.

This bonnet and windscreen bulkhead hinge for 2cv vans from 1961 onwards is higher quality than the original.

This electro-galvanised steel repair part enables you to repair the lower section of the windscreen bulkhead for 2CV saloons and vans.

It is excellent quality and includes the bonnet hinge on the body.

Small windscreen bay cover attachment for MX5 NA NB NBFL

- You need 5 small circular covers for the windscreen bay
- Original MAZDA part

DANSK Complete front windshield frame for Porsche 911, 912 e 930 :

-> Porsche 912 :
- 912 1.6 from 1966 to 1969
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.0 from 1965 to 1967
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989

For the 911 G series, adjustments will have to be made to the washer nozzles

DANSK Lower left corner of the windshield bay for Porsche 911, 912 and 930 :

-> Porsche 912 :
- 912 1.6 from 1966 to 1969
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.0 from 1965 to 1967
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989

DANSK Lower right corner of the windshield bay for Porsche 911, 912 and 930 :

-> Porsche 912 :
- 912 1.6 from 1966 to 1969
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.0 from 1965 to 1967
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989

DANSK lower frame of front windshield for Porsche 911, 912 and 930 :


-> Porsche 912 :
- 912 1.6 from 1965 to 1969
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.0 from 1965 to 1968
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989

This 2CV van bonnet and windscreen bulkhead hinge is higher quality than the original.

This electro-galvanised steel repair part enables you to repair the lower section of the windscreen bulkhead for 2CV saloons and vans.

It is excellent quality and includes the bonnet hinge on the body.

This 2cv bonnet and windscreen bulkhead hinge is higher quality than the original.

This electro-galvanised steel repair part enables you to repair the lower section of the windscreen bulkhead for 2CV saloons and vans.

It is excellent quality and includes the bonnet hinge on the body.

This bonnet hinge on bulkhead for Dyane cars and Acadianes is a quality remanufacture.

This electro-galvanised steel repair panel enables you to repair the boot hinge on all models of Dyanes and Acadianes.