Wing repair

High versionright rear fender arch for Volkswagen Golf 3 Sedan 5 doors and Vento:

- All models from 08/1991 to 08/1998

ATTENTION: Not suitable for Variant!

This repair sheet metal is delivered bare or in stock black paint according to our suppliers' deliveries. It must be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

This is an "adaptable" quality part, as it does not come from the original manufacturer.

Right front wheel arch side plate for VOLKSWAGEN Combi SPLIT from 03/1955 to 07/1967.

DANSK Rear right fender indicator bracket for Porsche 911, 912 and 930 from 1969 :

-> Porsche 912 :
- 912 1.6 of 1969
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.0 T / E / S of 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1977
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989

Lower front wing repair panel for MX-5 NA

For NA all models
Left side (driver)

The MX-5 NA is prone to sill corrosion. To effectively stop its progression, you often have to cut out the part affected by the corrosion and weld on a new panel
This galvanised steel panel enables you you to make this repair at a lower cost

Right rear fender contourrepair sheet for Fiat 500 F, L and R (1965-1975)
For models listed below:- Fiat 500 F from 1965 to 1968- Fiat 500 L from 1968 to 1972- Fiat 500 R from 1972 to 1975
Right side (passenger)Italian manufacture
Part covered with black protective paint, often scratched during transport/storage, must be removed before priming and painting.Made from old molds, adjustments may be necessary to fit your vehicle perfectly.
Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

Left Rear Fender Corner for Ford Capri 2 and 3

Ford Capri IIall models 1974-1978
Ford Capri IIIall models 1978-1986
Left (driver's) Side
This repair sheet made of galvanized steel allows you to repair arear fender bottom that has been damaged by corrosion at a lower cost.

Left rearwing repairplate for Mercedes-Benz C-Class:
- Compatible with all Mercedes-Benz C-Class w203 Sedan versions from 05/2000 to 02/2007 including Sport model type 55 AMG.
Please note! Not suitable for s203 Estate.

Right rear wing end for Fiat 500

For the models listed below:
- Fiat 500 F from 1965 to 1968
- Fiat 500 L from 1968 to 1972
- Fiat 500 R from 1972 to 1975

Right side (passenger)

This fender repair sheet enables you to replace only the rear fender end at a lower cost if it is corroded.

Made from old molds, adjustments may be necessary to fit your vehicle perfectly.

Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

Repair plate on left rear fender flange in front of wheel arch for Brazilian VW Combi from 1957 to 1975.
Preformed sheet metal, to fit.

This rear wing fixing screw is compatible with all Citroën ID sedans from 05/1967.
This stainless steel screw is M12x1.25.
This screw is different from pre-May 1967 models, which had a flanged head.
Compatible models:ID 19/20 Sedans (1985cc) - (05/1967-1971)

Lower front wing repair panel for Mazda MX-5 NA

For NA all models
Right side (passenger)

The MX-5 NA is prone to sill corrosion. To effectively stop its progression, you often have to cut out the part affected by the corrosion and weld on a new panel
This galvanised steel panel enables you you to make this repair at a lower cost

Right Rear Fender Cornerfor Opel Ascona A

Opel Ascona A all models from 1970 to 1975
Right side (passenger)

This repair sheet made of galvanized steel allows you to repair arear fender bottom damaged by corrosion at a lower cost.

This rear wing clip for 2cv saloons attaches the bottom of the rear wing on the body.

Tôle de réparation du coin inférieur d'aile arrière gauche pour VW Combi Split Brésilien de 1957 à 1975.
Pour modèles à petits feux et petits parechocs.

Lower rear left panel repair panel for VOLKSWAGEN Transporter T25/T3 from 1979 to 1992 including syncro.

Right rear wheel arch for Renault 5 (1972-1984)

For Renault 5 all 2-door models from 1972 to 1984
Except for specific Turbo bodies
Right side (passenger)

This high-quality electro-galvanized rear fender repair sheet for Renault 5 will replace a rear fender arch damaged by impact or corrosion.

Lower right front fender repair sheet for Mercedes E-Class W210
For repairing the lower part of the fender in the area of the side strip
Suitable for sedan and station wagon

Right rearwing repairplate for Mercedes-Benz C-Class:
- Compatible with all Mercedes-Benz C-Class w203 Sedan versions from 05/2000 to 02/2007 including Sport model type 55 AMG.
Please note! Not suitable for s203 Estate.

Left rear wheel arch for Renault 5 (1972-1984)
For Renault 5 all 2-door models from 1972 to 1984Except for specific Turbo bodiesLeft side (driver)
This rear fender repair plate for Renault 5 is made of electro-galvanized sheet metal, and will enable you to replace a rear fender arch damaged by impact or corrosion.
Storage marks may be present on the item.

Replacement plate for right front wing lining for Mercedes W123 Saloon, S123 Estate and C123 Coupé

This part is located between the front panel and the suspension shaft