Exhaust system joints

Provides a seal between the manifold and the Turbo,

For E60 & E61:
- 520 d M47N2
- 525 d M57N
- 530 d M57N

For E60 LCI & E61 LCI:
- 520 d M47N2

Seals between the exhaust manifold and the cylinder head,

For E90 & E91:
- 318 d M47N2
- 320 d M47N2
- 325 d M57N2
- 330 d/xd M57N2

For E92 & E93:
- 325 d M57N2
- 330 d M57N2
- 330 xd M57N2 (E92 only)

Seals between the exhaust manifold and the cylinder head,

For E90 LCI & E91 LCI:
- 325 d M57N2

Seals between the exhaust manifold and the cylinder head,

For Saloon & Touring:
- 520 d M47
- 525 d M57
- 530 d M57

Seals between the exhaust manifold and the cylinder head,

For E60 & E61:
- 520 d M47N2
- 525 d M57N
- 530 d M57N
- 530 d/xd M57N2

For E60 LCI & E61 LCI:
- 520 d M47N2
- 525 d/xd M57N2
- 530 d/xd M57N2

Exhaust gasket for Renault Clio Williams.

Located between the catalytic converter and the exhaust intermediate.

Assignments:
- 2.0 Williams C57M 1998cm3 150hp (F7R700) phase 1 from 1993 to 1994
- 2.0 Williams C57M 1998cm3 150hp (F7R700) phase 2 from 1994 to 1996

Provides a seal between the manifold and the Turbo,

For Saloon & Touring:
- 318 d M47N
- 320 d M47N
- 330 d/xd M57N

For Coupé & Convertible:
- 320Cd M47N
- 330 Cd M57N (Coupé only)

For Compact:
- 318 td M47N
- 320 td M47N

Seals between the exhaust manifold and the cylinder head,

For Saloon & Touring:
- 318 d M47 & M47N
- 320 d N47 & M47N
- 330 d/xd M57 & M57N

For Coupé & Convertible:
- 320Cd M47N
- 330 Cd M57N

For Compact:
- 318 td M47N
- 320 td M47N

On an air-cooled VW engine, the seal between the heater box and the exhaust is an essential part of the heating system. This joint is located between the exhaust manifold and the pipe that feeds the heater, helping to prevent exhaust gas leaks into the passenger compartment.
The heater box on a Bay Window Combi uses the heat generated by the engine and exhaust to heat the interior of the vehicle. This system is called hot-air heating. The gasket prevents exhaust gases from entering the heating system and contaminating the air inside the vehicle.
If the gasket is worn, cracked or loose, exhaust gases can seep into the cabin, which is dangerous for passengers (carbon monoxide emissions).A defective gasket can lead to a loss of heating system efficiency.A damaged gasket can allow exhaust gases to escape, creating an unpleasant odor inside the Combi.
If you regularly experience problems with heat in your Combi, this may be linked to a fault in the heating system, including the gasket between the heater box and the exhaust.
This gasket is suitable for VW Combi Bay Window engine Type 4 :- 1700 (CA, EA) from 08/71 to 12/74- 1800 (AP, AN, AT, EC) from 08/73 to 07/75- 2000 (CJ) from 08/76 to 07/79
Also suitable for VW 412

Heater seal between the intake pipe and the exhaust. Left or right side, sold individually.

For VW Beetle, Karmann-Ghia & Camper
with engines:
- Moulded base 25/30hp
- 1200 up to no. ->3 972 440.
Years: until ->07/1964.
Chassis:up to no. ->6 502 399.

Exhaust manifold gasket for Peugeot 205 with Talbot E1, F1, G1, J2, Y2 engine
Assignments :
1.3, Year of manufacture 02.1984 - 10.1987, 1294 ccm, 62 HP1.5, Year of construction 02.1984 - 10.1987, 1442 ccm, 86 CH1.1 XA, Year of construction 07.1987 - 10.1988, 1118 ccm, 54 CH1.2, Construction year 01.1987 - 12.1990, 1204 ccm, 64 CH1.3, Year of construction 08.1990 - 07.1992, 1294 ccm, 64 CH1.4, Year of construction 06.1987 - 12.1989, 1442 ccm, 86 CH

Triangular metal manifold gasket for 55mm diameter exhaust:Thickness: 1.6mmInside diameter: 55mmMounting center distance diameter: 88.90mmDistance between fixing screws: 77mmMounting hole diameter: 9mm

Corteco exhaust manifold gasketfor Peugeot 306 S16 ACAV 150-155cvs Quality gasket for optimum exhaust gas tightness. Applications :- 306 S16 - 2.0 16V 1998cm3 155hp (XU10J4R) ACAV phase 1 from 1993 to 1994- 306 S16 - 2.0 16V 1998cm3 150hp (XU10J4R) ACAV phase 1 from 1994 to 1997

Seals

Copper seals between cylinder head and exhaust.
Improved temperature resistance.
Inside diameter: 42 mm (1-5/8 inches)
For Type 1 engines with large Sport exhaust

Original type bigger metal gasket
For sporty exhaust
Interior diameter: 36 mm

Seal between the silencer and the intake twin-heat pipe
For Beetle 1303 with 1300 AR type engine.

Seal between manifold and heater unit or final silencer
Distance between axes: 70 mm
Interior diameter: 45 mm
4 required for one engine, sold per unit.

For Beetle USA, 08/1974 ->12/1975
1600 cc (AJ) L-Jetronic injection engine
- Manual gearbox, 08/1974 ->12/1975 no. 000 001 ->071 682.
- Automatic gearbox, 08/1974 ->09/1974 no. 000 001 ->012 504.

Seal between pipe and EGR filter
for Beetle USA version from 08/1974->
with 1600 injection engine.

Catalytic converter mounting clamp and seal.

For VW Beetle USA version from 08/1974->
with 1600 injection engine L-Jetronic.