Exhaust system joints

FEBI exhaust gasket for Bmw E3: - Compatible with all Bmw E3 versions from 08/1968 to 02/1977 including 3.3 Li engine code m30. Need 2 gaskets per vehicle. Sold individually.

Elringexhaust manifold gasket for Peugeot 306 S16 167cvs
Quality gasket for optimum exhaust gas tightness.
Assignments :- 306 S16 - 2.0 16V 1998cm3 167hp (XU10J4RS) phase 2 from 1997 to 1999- 306 S16 - 2.0 16V 1998cm3 167hp (XU10J4RS) phase 2.1 from 1999 to 2001

Victor Reinz exhaust manifold gasket for Bmw 02 Series:
- Compatible with all Bmw 02 Series E10 versions from 01/1968 to 07/1976 with 4-cylinder petrol engine code m10 except 2002 Turbo model.
Need 4 exhaust manifold gaskets for 1 vehicle.
Sold individually.

Set of 2 steel blanking pieces
Enables the heater vents to be closed-off
on 4 in 1 manifolds in
a twin-carburettor without heating configuration.
For Type 1 engines: 1200 ->1600 cc.

Exchanger seal for:
- 911 T, E and S 2.0 to 2.4 from 08/1966 to 07/1973
- 911 S 2.4 from 08/1971 to 07/1973
- 911, 911 S and 911 Carrera 2.7 from 08/1973 to 07/1975
- 911 SC and 911 Carrera 2.7 and 3.0 from 08/1975 to 07/1983

Quantity required per heating box: 3

German quality metal
original type clamp seals
for mounting and sealing exhaust pipes.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

Comes without seals for exhaust end fittings

Exhaust gasket between manifold and catalytic converter for Porsche 968 :

- 968 3.0 - 240hp (M44.43/M44.44) from 1992 to 1995
- 968 Club Sport 3.0 - 240hp (M44.43) from 1993 to 1995

Gasket sold individually. Two quantities are required per vehicle.

Metal exhaust gasket between catalytic converter and silencer for Porsche 968 :

- 968 3.0 - 240hp (M44.43/M44.44) from 1992 to 1995
- 968 Club Sport 3.0 - 240hp (M44.43) from 1993 to 1995

High-quality gasket and clamp kit for mounting a silencer , including :
- 2 cylinder head exhaust gaskets
- 2 single intake pipe heating gaskets
- 2 clamps

Silent block for CSP Super Competition exhaust
Sold individually, requires 2

Pre-silencer seal for:
- 924 2.0

Is assembled between the manifold and the intermediate silencer.

Febi exhaust gasket for Bmw E9: Bmw E9 : - 2.5 cs 6cyl 150hp from 05/1974 to 11/1975 (engine code m30)
- 2800 cs 6cyl 170hp from 12/1968 to 03/1971 (engine code m30)
- 3.0 cs 6cyl 180hp from 04/1971 to 11/1975 (engine code m30)
- 3.0 csi 6cyl 200hp from 02/1972 to 11/1975 (engine code m30)
- 3.0 csiL 6cyl 200hp from 01/1974 to 11/1975 (engine code m30)
- 3.0 csl 6cyl 206hp from 09/1972 to 06/1973 (engine code m30) Located between the manifold and the manifold downpipe . Need 2 per vehicle. Sold individually.

Triangular coupling seal between the manifold down pipe and the intermediate exhaust silencer.

For VW Transporter T4, Multivan, 09/1990 ->12/1995
up to chassis no. ->70-T-199 999.
Petrol engines:
- 2.0 84hp (AAC)
- 2.5 110hp (AAF, ACU, AEN)

For Utility VW LT, 08/1988 ->12/1995
- 2.4 Petrol 95hp (1E)

Seal between the manifold and the exhaust down pipe.

For VW Transporter T4, Multivan, 09/1990 ->12/1995:
- 2.0 84hp (AAC)
- 2.5 110hp (AAF)
- 2.5 110hp (ACU) up to ->03/1994
up to chassis no. ->70-R-090 000.

Exhaust manifold gasket for Peugeot 205

For Peugeot 205:
- 1.6 GT, XS 1580cm3 89hp (XU5M/Z) from 08/1992 to 07/1993
- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1985 to 07/1987
- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1987 to 07/1993
- 1.6 Automatic catalyzed 1580cm3 89hp (XU5M/Z) from 08/1993 to 08/1994
- 1.6 GTI 1580cm3 105hp (XU5J) from 03/1984 to 12/1986
- 1.6 GTI 1580cm3 115hp (XU5JA) from 03/1986 to 12/1986
- 1.6 GTI 1580cm3 115hp (XU5JA) from 01/1987 to 07/1992
- 1.9 GTI 1905cm3 130hp (XU9JA) from 01/1987 to 07/1992
- 1.9 GTI Catalyzed 1905cm3 122hp (XU9JA/Z) from 08/1992 to 12/1993
- 1.9 Gentry 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993

For Peugeot 205 Cabriolet :
- 1.6 CTI 1580cm3 115hp (XU5JA) from 08/1985 to 07/1990
- 1.9 CTI 1905cm3 130hp (XU9JA) from 08/1990 to 07/1991
- 1.9 CTI Catalyzed 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993

4 quantities required per collector
Sold individually

Exhaust manifold gasket for Bmw 3 Series:

Sedan and Touring :

- 316d 4cyl 2.0L 116hp from 06/2009 to 10/2011 (engine code N47D20)
- 318d 4cyl 2.0L 143hp from 11/2007 to 03/2010 (engine code N47D20)
- 318d 4cyl 2.0L 143hp from 09/2009 to 10/2011 (engine code N47D20TU)
- 320d ed 4cyl 163hp from 10/2009 to 11/2011(engine code N47D20TU)
- 320d 4cyl 177hp from 07/2007 to 03/2010 (engine code N47D20)
- 320d 4cyl 184hp from 09/2009 to 12/2011 (engine code N47D20TU)
- 320dxDrive 4cyl 177hp from 07/2007 to 02/2010 (engine code N47D20)
- 320dxDrive 4cyl 184hp from 09/2009 to 10/2011 (engine code N47D20TU)
- 325d 3.0L 204hp from 09/2009 to 05/2012 (engine code N57D30UL)
- 330d 245hp from 07/2007 to 12/2011 (engine code N57D30OL)
- 330dxDrive 245hp from 07/2007 to 05/2012 (engine code N57D30OL)

Coupé and Cabriolet :

- 320d 4cyl 177hp from 06/2005 to 02/2010 (engine code N47D20)
- 320d 4cyl 184hp from 11/2008 to 06/2013 (engine code N47D20TU)
- 320dxDrive 4cyl 184hp from 11/2008 to 06/2013 (engine code N47D20TU)
- 325d 3.0L 204hp from 09/2009 to 06/2013 (engine code N57D30UL)
- 330d 245hp from 07/2009 to 06/2013 (engine code N57D30OL)
- 330dxDrive 245hp from 02/2010 to 06/2013 (engine code N57D30OL)

ATTENTION! Not suitable for 2.0D engine code m47d20tu and 3.0D m57d30tu2.

Sold individually.

Need 2 quantities.

For a VOLKSWAGEN Transporter T4 from 1996 to 2003
From chassis 70-T-200 001->

- 2.0L petrol 84hp (AAC)
- 2.5L petrol 110hp (AEU, ACU)
- 2.5L petrol 115hp (AET, APL, AVT)
- 2.8L VR6 140hp (AES)
- 2.8L V6 204hp (AMV)

Seals

Kit of 2 steel plugs
To close heating outlets
on 4-in-1 manifolds when using dual carburetors
without reheating.
For Type 1 engines: 1200 ->1600cc.