Exhaust system joints

For Golf 4:
- 1.8 Turbo 150hp (AGU, ARZ, AUM)
- 1.8 Turbo 180hp (AUQ)

For Passat 4 (3B2, 3B5):
- 1.8 115 hp (AFY)
- 1.8 125hp (ADR, APT, ARG)
- 1.8 Turbo 150hp (AEB, ANB, APU)

For Passat 5 (3B3, 3B6) up to 04/02:
- 1.8 Turbo 150 hp (AWT)
- 1.8 Turbo 170hp (AWM)

Triangular gasket between intake and exhaust manifolds for Citroën Traction 11hp.
This 3rd generation gasket is designed for 72x100 and 78x100 engines.
Unlike the 1st and 2nd generation gasket, this gasket is drilled in the center.
Compatible models:- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B from 02/1939 to 1941, Engine, type 11cv perfo 1911cc (56cv)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 02/1939 à 1941, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 02/1945 à 01/1955, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 02/1945 à 01/1955, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11C Commercial 11 "Performance", type 11B from 03/1954 to 1957, Engine, type 11cv D 1911cc (59hp)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 02/1955 à 02/1956, Moteur, type 11cv D 1911cc (59cv)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 02/1955 à 07/1957, Moteur, type 11cv D 1911cc (59cv)

This metal manifold gasket for Renault 4 (10/1961-05/1986) - Billancourt is true to the original.

This manifold gasket for R4 is compatible with all Billancourt engine models type 690, 680-01, 680-02, 800-01; 800-02, 800-05, B1B, 839-06.
You will need 2 per car.

Compatible models:

- R4 type R1120 : 10/1961 to 09/1971
- R4 super type R1122 : 03/1962 to 09/1962
- R4 type R1123 : 12/1963 to 05/1986
- R4 super type R1124 : 09/1962 to 12/1963
- R4 Export/L/TL type R1126: 09/1971 to 07/1982
- R4 Safari type R1129: 09/1975 to 07/1978

- R4 4CV van R2102: 10/1961 to 03/1966
- R4 4CV van type R2104: 02/1965 to 03/1966
- R4 4CV van R2105: 03/1966 to 09/1971
- R4 5CV van type R2106: 03/1966 to 05/1986
- R4 Elevated van type R2108: 10/1972 to 07/1975
- R4 4HP van F4 type R2109: 09/1971 to 07/1982
- R4 Van F4 type R2391: 09/1972 to 05/1986
- R4 Van 4HP glazed F4 type R2392: 09/1973 to 07/1982

Pre-silencer seal for:

- 924 2.0

Is assembled between the manifold and the intermediate silencer.

Exhaust gasket located on underbody tube flanges for Citroën Traction since 06/1936.
Centre distance: 70mm
Compatible models:- Traction Avant 11A Berline 4 portes 11CV, type 11A de 06/1936 à 02/1937, Moteur, type 11cv 1911cc (46cv)- Traction Avant 11A Faux-Cabriolet (Coupé) 11CV, type 11A from 06/1936 to 02/1937, Engine, type 11cv 1911cc (46cv)- Traction Avant 11A Roadster (convertible) 11HP, type 11A from 06/1936 to 02/1937, Engine, type 11hp 1911cc (46hp)- Traction Avant 11A Conduite intérieure 11CV rallongée, type 11A de 06/1936 à 02/1937, Moteur, type 11cv 1911cc (46cv)- Traction Avant 11A Familiale 11CV extended, type 11A from 06/1936 to 02/1937, Engine, type 11cv 1911cc (46cv)- Traction Avant 11A coupé de ville 11CV rallongée, type 11A de 06/1936 à 02/1937, Moteur, type 11cv 1911cc (46cv)- Traction Avant 11A Commercial 11CV extended, type 11A from 06/1936 to 02/1937, Engine, type 11cv 1911cc (46cv)- Traction Avant 11AL Berline 4 portes 11CV "légère", type 11AL de 06/1936 à 02/1937, Moteur, type 11cv 1911cc (46cv)- Traction Avant 11AL Faux-Cabriolet (Coupé) 11HP "light", type 11AL from 06/1936 to 02/1937, Engine, type 11hp 1911cc (46hp)- Traction Avant 11AL Roadster (Cabriolet) 11HP "light", type 11AL from 06/1936 to 02/1937, Engine, type 11hp 1911cc (46hp)- Traction Avant 11AM Berline 4 portes 11CV "légère", type 11AM de 02/1937 à 1937, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11AM Faux-Cabriolet (Coupé) 11CV "light", type 11AM from 02/1937 to 1937, Engine, type 11cv perfo 1911cc (56cv)- Traction Avant 11AM Roadster (Convertible) 11HP "light", type 11AM from 02/1937 to 1937, Engine, type 11hp perfo 1911cc (56hp)- Traction Avant 11B Berline 4 portes 11CV, type 11B de 02/1937 à 02/1939, Moteur, type 11cv 1911cc (46cv)- Traction Avant 11B Faux-Cabriolet (Coupé) 11HP, type 11B from 02/1937 to 02/1938, Engine, type 11hp 1911cc (46hp)- Traction Avant 11B Roadster (convertible) 11HP, type 11B from 02/1937 to 02/1939, Engine, type 11hp 1911cc (46hp)- Traction Avant 11BL Berline 4 portes 11CV "légère", type 11BL de 02/1937 à 02/1939, Moteur, type 11cv 1911cc (46cv)- Traction Avant 11BL Faux-Cabriolet (Coupé) 11HP "light", type 11BL from 02/1937 to 02/1938, Engine, type 11hp 1911cc (46hp)- Traction Avant 11BL Roadster (convertible) 11HP "light", type 11BL from 02/1937 to 02/1939, Engine, type 11hp 1911cc (46hp)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 02/1939 à 1941, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 02/1939 à 1941, Moteur, type 11cv perfo 1911cc (56cv)1911cc (5- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 02/1945 à 01/1955, Moteur, type 11cv perfo 6cv)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 02/1945 à 01/1955, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11C Commercial 11 "Performance", type 11B from 03/1954 to 1957, Engine, type 11cv D 1911cc (59hp)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 02/1955 à 02/1956, Moteur, type 11cv D 1911cc (59cv)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 02/1955 à 07/1957, Moteur, type 11cv D 1911cc (59cv)

Ring gasket seal between the down pipe (KC27302) and the silencer (KC27300). Dimensions: 50/45/42 mm

For VW Transporter T25/T3
Bus, Caravelle, Joker.
Years: 08/1985 ->07/1992
Chassis no. G-000 001 ->N-015 000.
Engine: 1.7 Diesel 57hp (KY)

Upper intake manifold gasket VICTOR REINZ for Porsche 911 type 996 Carrera 2, 4 and 4S from 1998 to 2005 :
- 996 phase 1 3.4 Carrera from 1998 to 2001- 996 phase 1 3.4 Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 Carrera from 2002 to 2005- 996 phase 2 3.6 Carrera 4 from 2002 to 2005- 996 phase 2 3.6 Carrera 4S from 2002 to 2005
The gasket is sold individually and 6 quantities are required per vehicle.

Joint between the front manifold outlet pipe and the catalytic converter.
For Golf 3 saloon, estate, cabriolet & Vento 92 ->98:
- 1.6 100hp (AEK, AFT, AKS)
- 1.9 Diesel 64hp (1Y)
- 1.9 SDI 64hp (AEY)
- 1.9 turbo-Diesel 75hp (AAZ)
- 1.9 TDI 90hp (1Z)

Dimensions: 79 x 56 x 15 mm
for exhaust connection : 60 -> 60 mm

For Polo 6N1:
- 1.6 120hp (AJV)
- 1.7 SDi 57hp and 60hp (AHG, AKU)
- 1.9 SDi 64hp (AEF, AGD)

For Polo 6N2:
- 1.0 50hp (ALD, AUC)
- 1.4 54hp (AKP)
- 1.4 60hp (AKK, AUD)
- 1.4 75hp (AHW, APE, AUA)
- 1.4 100hp (AFK, AQQ, AUB)
- 1.6 125hp (ARC, AVY)
- 1.7 60hp (AKU)
- 1.9 Diesel 64hp (AEF, AGD, ASX)

For Polo Classic 6V2:
- 1.4 60hp (AKK, ANW, AUD)
- 1.4 75hp (APE, AUA)
- 1.7 60hp (AKW)
- 1.9 Diesel 64hp (1Y, AEY)
- 1.9 SDi 68hp (AGP, AQM)

For Polo 9N1:
- 1.4 75hp (AUA, BBY, BKY)
- 1.4 100hp (BBZ)
- 1.9 SDi 64hp (ASY)

For Polo 9N3:
- 1.9 SDi 64hp (ASY)

Left gasket on heat exchanger for VW Combi Bay Window from 1973 to 07/1979 with Type 4 engine from chassis no. 214 2057 730.

Ajusa exhaust catalyst gasket for Bmw 5 Series:
Bmw 5 Series E39 Sedan :
- 520i 2.2L 170hp phase 2 from 03/2000 to 07/2003 (engine code M54B22)- 525i 192hp phase 1 from 11/1999 to 08/2000 (engine code M54B25)- 525i 192hp phase 2 from 09/2000 to 07/2003 (engine code M54B25)- 530i 231hp phase 2 from 03/2000 to 07/2003 (engine code M54B30)
Bmw 5 Series E39 Touring :
- 520i 2.2l 170hp phase 2 from 04/2000 to 12/2003 (engine code M54B22)- 525i 192hp phase 1 from 11/1999 to 08/2000 (engine code M54B25)- 525i 192hp phase 2 from 09/2000 to 12/2003 (engine code M54B25)- 530i 231hp phase 1 from 11/1999 to 08/2000 (engine code M54B30)- 530i 231hp phase 2 from 09/2000 to 12/2003 (engine code M54B30)
Warning! Not suitable for m52tu engine.
2 catalytic converter gaskets required per vehicle.
Sold individually.

Catalytic converter outlet gasket for Mazda RX-8

For RX-8 all models from 2003 to 2012

This metal gasket creates an airtight seal between the catalytic converter and the intermediate exhaust

Inside diameter: 65mm
Outside diameter: 82mm
Thickness: 14mm

Intake and exhaust manifold gasket for Renault 5

For Renault 5 :
- Renault 5 LS (R1224) from 04/1974 to 06/1975 - Cléon Fonte 1289cm3 64hp (810-725)
- Renault 5 TS (R1224/R1394) from 07/1975 to 12/1984 - Cléon Fonte 1289cm3 64hp (810-725)
- Renault 5 TL (R1222/R1392) from 01/1972 to 12/1984 - Cléon Fonte 956cm3 46hp (689-710)
- Renault 5 TL (R1227/R1397) from 07/1979 to 12/1984 - Cléon Fonte 1108cm3 45hp (688-713)
- Renault 5 GTL (R1225) from 02/1976 to 06/1979 - Cléon Fonte 1289cm3 64hp (810-726)
- Renault 5 GTL (R1226/R1395) from 07/1979 to 12/1984 - Cléon Fonte 1108cm3 45hp (688-713)
- Renault 5 1300 Automatic (R1225/R1395) from 01/1978 to 01/1981 - Cléon Fonte 1289cm3 64hp (810-729)
- Renault 5 1400 Automatic (R1229/R1399) from 02/1981 to 12/1984 - Cléon Fonte 1397cm3 63hp (847-712)
- Renault 5 TX Automatic (R1229/R1399) from 02/1981 to 12/1984 - Cléon Fonte 1397cm3 63hp (847-712)

Original quality manifold gasket

For BMW:
- E30 316i, 318i, engine M10
- E30 325i/e
- E28 518, 518i, 525e
- E34 520i, 525i, engine M20

Gasket between the exhaust manifold on the cylinder head and the exhaust downpipe. For versions with a rectangular flange.

For Golf 1:
- 1.5 50hp (CK) up to ->07/79
- 1.5 65hp (GH) from 79 ->80
- 1.5 70hp (FH, FK) up to ->07/79
- 1.5 70hp (JB) from 79 ->80
- 1.5 85hp (FD) up to ->07/79
- 1.6 65hp (FV) from 79 ->80
- 1.6 75hp (FP) up to ->07/79
- 1.7 78hp (EN)

For Passat type 32/33:
- 1.5 85hp (ZC)
- 1.6 75hp (YN)
- 1.6 85hp (YP)
- 1.6 110hp (YS)

For Passat type 32B:
- 1.3 60hp (EP)
- 1.6 65hp (WP)
- 1.6 75hp (DT, JU, WV, WY, YN)
- 1.6 85hp (YP)
- 1.8 87hp (RM)
- 1.8 90hp (DS, JV)

For BMW E21:
- All models

Gasket between exhaust manifold and cylinder head.

Compatible with Seat Ibiza type 6L:
- 1.4 75hp (BBY, BKY)
- 1.4 86hp (BXW)
- 1.4 100hp (AUB, BBZ)

Gasket seal between the front tube manifold outlet and the catalytic converter.
For Passat 3 (35i) 04/88 ->12/96:
- 1.6 72 - 75hp (RF, 1F)
- 1.8 75hp (AAM)
- 1.8 90hp (RP, ABS, ADZ) up to chassis no. ->3A-S-225 000

Dimensions: 66 x 40/45 x 16 mm
for exhaust coupling: 50 -> 45/42 mm

Gasket between exhaust manifold and turbo.

Compatible with Seat Leon type 1M:
- 1.8 Turbo 180hp (AJQ, APP, ARY, AUQ)
- 1.8 Turbo 210hp (AMK)
- 1.8 Turbo 225hp (BAM)