Exhaust system joints

Manifold seal for:
- 924 S
- 944 2.5 and 2.7
- 944 2.5 S and 3.0 S2
- 968

Exhaust gasket for Peugeot 205 with TU engine
A "steel wool" typesealing ring that makes the connection between the front exhaust pipe and the intermediate pipe.
Assignments :- 1.0 XL, GL, Junior 954cm3 45hp (TU9) from 08/1987 to 07/1992- 1.0 XE, XR, Junior catalyzed 954cm3 50hp (TU9M/Z) from 08/1992 to 07/1995- 1.1 GL, XL, GR, XR 1124cm3 55hp (TU1) from 08/1987 to 07/1992- 1.1 XE, GE, XL, GL, XR, GR catalysed 1124cm3 60hp (TU1M/Z) from 08/1992 to 07/1995- 1.3 Rallye 1294cm3 103hp (TU24) from 08/1987 to 07/1992- 1.4 GR, SR, XR 1360cm3 65hp (TU3) from 08/1987 to 07/1988- 1.4 GR, SR, XR 1360cm3 69hp (TU3A) from 08/1988 to 07/1990- 1.4 GR, SR, XR 1360cm3 75hp (TU3F2) from 08/1990 to 07/1992- 1.4 GR, SR, XR Catalyzed 1360cm3 75hp (TU3M/Z) from 08/1992 to 12/1998- 1.4 GT, XS 1360cm3 85hp (TU3S) from 08/1987 to 07/1992
205 Cabriolet:- 1.1 CJ 1124cm3 55hp (TU1) from 08/1987 to 07/1992- 1.1 CJ Catalyzed 1124cm3 60hp (TU1M/Z) from 08/1992 to 07/1995- 1.4 CJ 1360cm3 65hp (TU3) from 08/1987 to 07/1988- 1.4 CJ 1360cm3 69hp (TU3A) from 08/1988 to 07/1990- 1.4 CJ 1360cm3 75hp (TU3F2) from 08/1990 to 07/1992- 1.4 Cabriolet 1360cm3 75hp (TU3M/Z) from 08/1992 to 07/1995

For Golf 5:
- 1.9 TDi 90hp(BRU, BXF)
- 1.9 TDi 105hp (BKC, BXE)
- 2.0 SDi 75hp (BDK)

For Corrado:
- 2.0 16s 136hp (9A)

For Golf 2:
- 1.8 108hp (PF)
- 1.8 16s 129hp (PL)
- 1.8 16s 139hp (KR) ifsubsequently fitted catalytic converter

Dimensions: 79 x 56 x 15 mm
for exhaust connection : 60 -> 60 mm

Kit of 2 steel plugs
To close heating outlets
on 4-in-1 manifolds when using dual carburetors
without reheating.
For Type 1 engines: 1200 ->1600cc.

For Audi A3 type 8P:
- 1.9 TDi 105hp (BKC, BXE)
- 2.0 TDi 136hp (AZV)
- 2.0 TDi 140hp (BKD)
- 2.0 TDi 170hp (BMN)

For Audi A3 Sportback type 8PA:
- 1.9 TDi 105hp (BKC, BXE)
- 2.0 TDi 136hp (AZV, CBAA)
- 2.0 TDi 140hp (BKD)
- 2.0 TDi 163hp (BUT)
- 2.0 TDi 170hp (BMN, CBBB)

Ajusa exhaust catalyst gasket for Bmw z4:
Bmw z4 E85 Roadster :
- 2.2i 170hp phase 1 from 12/2002 to 11/2005 (engine code M54B22)- 2.5i 192hp phase 1 from 04/2002 to 11/2005 (engine code M54B25)- 3.0i 231hp phase 1 from 04/2002 to 11/2005 (engine code M54B30)
Need 2 catalytic converter gaskets per vehicle.
Sold individually.

Ring gasket seal between the down pipe (KC27202) and the silencer (KC27200). Dimensions: 60/60 mm

For VW Transporter T25/T3, Bus,
Caravelle, Joker, Syncro (4 x 4).
Years: 08/1989 ->07/1992
Chassis no. L-000 001 ->N-015 000.
Engine: 1.6 Turbo-Diesel 70hp (JX)

Comes without seals for exhaust end fittings

El Ring turbogasket for Bmw 1 Series :
Bmw 1 Series F20 :
- 114d 4cyl 95hp from 07/2012 to 02/2015 (engine code n47n)- 114d 4cyl 95hp from 07/2014 to 05/2015 (engine code n47n)- 116de 4cyl 116hp from 09/2011 to 02/2015 (engine code n47n)- 116d 4cyl 116hp from 12/2010 until 02/2015 (engine code n47n)- 118d 4cyl 143cv from 07/2010 until 02/2015 (engine code n47n)- 118xd 4cyl 143hp from 11/2012 to 02/2015 (engine code n47n)
Bmw 1 Series F21 :
- 114d 4cyl 95hp from 07/2012 to 02/2015 (engine code n47n)- 114d 4cyl 95hp from 07/2012 to 02/2015 (engine code n47n)- 116de 4cyl 116hp from 12/2011 to 02/2015 (engine code n47n)- 116d 4cyl 116hp from 01/2012 to 02/2015 (engine code n47n)- 118d 4cyl 143cv from 07/2010 until 02/2015 (engine code n47n)- 118xd 4cyl 143cv from 11/2012 until 02/2015 (engine code n47n)

Please note
- Not suitable for 120D and 120XD engine code n47n.
- Only one turbo seal required for 1 engine.

For Passat 3 (35i) from 10/93->:
- 1.8 75hp (AAM)
- 1.8 90hp (ABS,ADZ)

For Passat 4 (3B2, 3B5):
- 1.6 100hp (AHL) up ->04/98

For Passat 5 (3B3, 3B6):
- 1.9 TDi 100hp (AVB)
- 1.9 TDi 130/131hp (AVF, AWX)
- 2.0 115hp (AZM) up ->04/02
- 2.0 TDi 136hp (BGW, BHW)

For New Beetle (1C, 9C, 1Y):
- 1.4 75hp (BCA)

Seal between the exhaust manifold and the outlet tube
For Passat 3 92 ->97:
- 1.8 75 hp (AAM)
- 1.8 90 hp (ABS, ADZ)
(catalytic and non-catalytic since chassis 31-N-240 001->)

Exhaust gasket between the silencer and the catalyst for Porsche Boxster 987 :

- 987 2.7 Boxster phase 1 - 240 hp (M96.25) from 2005 to 2006
- 987 3.2 Boxster S phase 1 - 280 hp (M96.26) from 2005 to 2006
- 987 2.7 Boxster phase 1 - 245 hp (M97.20) from 2007 to 2008
- 987 3.4 Boxster S phase 1 - 295 hp (M97.21) from 2007 to 2008
- 987 3.4 Boxster RS 60 Spyder - 303 hp (M97.22) of 2008
- 987 2.9 Boxster phase 2 - 255 hp (MA1.20) from 2009 to 2012
- 987 3.4 Boxster S phase 2 - 310 hp (MA1.21) from 2009 to 2012
- 987 3.4 Boxster Spyder - 320 hp (MA1.21) from 2010 to 2012

Quantity per car : 2

Sold individually

Located at the outlet of the catalytic converter, for connection with the exhaust line,

For Saloon & Touring:
- 320 i M52
- 323i M52 (Saloon only)
- 328 i M52

For Coupé:
- 320 Ci M52
- 323Ci M52
- 328Ci M52

For convertible:
- 323Ci M52

This exhaust flange gasket for Citroën ID (1965-1975) is a reproduction.
This exhaust flange gasket for ID is located at the end of the manifold before the double primary tube, and is compatible with all models from vintage 65 onwards.

Connecting tube ring for Porsche 911 with injection and with exchanger Type RS11272 :

- 911 2.7 from 1975 to 1977
- 911 2.7 S from 1975 to 1977
- 911 Carrera 2.7 from 1975 to 1977
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

Mounts at the fitting on the connecting tube.

Gasket between exhaust manifold and cylinder head.

Compatible with Skoda Octavia type 1U:
- 1.8 125hp (AGN)
- 1.8 Turbo 150hp (AGU, ARX, ARZ, AUM)
- 1.8 Turbo 180hp (AUQ)

Exhaust seal between cylinder head exit and right-handheater box (cylinder 1 or 4). 2 required per engine, sold individually.

For VW Kombi Bay Window T2 engine type 4:
- 2000 (CJ), 08/1978 ->07/1979
From chassis no. 219 2000 001->

For VW Transporter T25/T3, Type 4 engines:
- 2000 (CU, CV), 05/1979 ->12/1982

Febi exhaust gasket for Bmw E9: Bmw E9 : - 2.5 cs 6cyl 150hp from 05/1974 to 11/1975 (engine code m30)
- 2800 cs 6cyl 170hp from 12/1968 to 03/1971 (engine code m30)
- 3.0 cs 6cyl 180hp from 04/1971 to 11/1975 (engine code m30)
- 3.0 csi 6cyl 200hp from 02/1972 to 11/1975 (engine code m30)
- 3.0 csiL 6cyl 200hp from 01/1974 to 11/1975 (engine code m30)
- 3.0 csl 6cyl 206hp from 09/1972 to 06/1973 (engine code m30) Located between the manifold and the manifold downpipe . Need 2 per vehicle. Sold individually.