Coil over suspension kit

Height-adjustable shock absorbers + springs, fixed setting.
Lowering: front: 30-65 mm / rear: 35-60 mm.

Passat 3B / 3BG (Except 4-Motion)

MTS TECHNIK threaded combination suspension kit STREET range for Golf 2 Syncro and G60
For VW Golf 2 all Syncro petrol and diesel models , including G60Not suitable for Golf 2 Country
STREET range: Firm setting for sporty driving on the road
Height-adjustable shock absorbers from -25 to -80 mm.The shock absorbers are twin-tube gas-hydraulic versions.Their setting is fixed, so hardness cannot be adjusted.The MTS factory setting is firm, giving it a truly sporty feel.Shock absorber bodies are galvanized for corrosion resistance.A guarantee of reliability, this MTS Technik kit is assembled with main springs developed and manufactured by EIBACH and is TÜV approved.

MTS TECHNIK threaded combination suspension kit COMFORT range for Volkswagen Golf 2
For VW Golf 3 Sedan and Convertible all models except Syncro
COMFORT range: Height-adjustable, with a softer setting than the STREET range for comfort and handling close to the original suspension.
Height-adjustable shock absorbers from -25 to -80mm approx.The shock absorbers are twin-tube gas-hydraulic versions.Their setting is fixed, so their hardness cannot be adjusted.Shock absorber bodies are galvanized for corrosion resistance.Urethane shock absorber stop
A guarantee of reliability, this MTS Technik kit is assembled with main springs developed and manufactured by EIBACH and is TÜV approved.

Complete MTS TECHNIK Comfort Series height-adjustable threaded combination suspension kit for Volkswagen Golf 1 and Scirocco:

Golf 1 Sedan :
- All petrol and diesel models from 02/1974 to 12/1983 (including GTI)

Golf 1 Cabriolet :
- 1.5L, 1.6L, 1.8L from 01/1979 to 07/1993

Jetta 1 :
- All petrol and diesel models from 08/1979 to 2/1984

Scirocco 1 type 53 :
- 1.1L, 1.3L, 1.5L, 1.6L from 02/1974 to 03/1981

Scirroco 2 type 53B :
- All models from 04/1981 to 07/1992 (including 16S)

ATTENTION: Not suitable for Golf 1 Caddy. On the Golf 1 GTI model, the chassis is already lowered by -15mm compared with the standard chassis. This kit will therefore only allow -20mm front and -65mm rear lowering on GTI!

Kit includes :
- 2 twin-tube gas-hydraulic front shock absorbers, adjustable from -35mm to -80mm
- 2 rear twin-tube gas-hydraulic shock absorbers adjustable from -35mm to -80mm
(Lowering values given as an indication with standard chassis as reference)
- 4 springs
- Stops and dust covers
- Adjusting wrench
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Comfort Series kit have been specially designed to maintain maximum suspension comfort in all circumstances, without sacrificing roadholding.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable in hardness.
Shock absorber bodies are galvanized for corrosion resistance and longevity.

Front and rear suspension bearings are not included.
We advise you to replace them with new ones when you change the suspension.

Depending on your lowering settings and the type of rims you're using, you may need to fit spacers for a perfect fit.

This kit comes with a 2-year manufacturer's warranty.

Give your Golf 1 the best, with a high-quality MTS TECHNIK kit!

STREET range MTS TECHNIK threaded combination suspension kit for Audi A4 (B7)
For Audi A4 (B7) all models with permissible front axle load greater than 1081kg (check vehicle tare plate):- Quattro sedan only- Estate (Avant) including Quattro- Cabriolet including Quattro
STREET range: Firm setting for sporty road driving
Height-adjustable shock absorbers from -35 to -65 mm for front and rear.The shock absorbers are twin-tube gas-hydraulic versions.Their setting is fixed, so their hardness cannot be adjusted.The MTS factory setting is firm, giving it a truly sporty feel.Shock absorber bodies are galvanized for corrosion resistance.A guarantee of reliability, this MTS Technik kit is assembled with springs developed and manufactured by EIBACH and is TÜV approved.
This kit comes with a 2-year manufacturer's warranty.

REDLINE threaded shock absorber kit for Audi A3 (8P)
For Audi A3 (8P) :- Quattro all models- Sportback all TDI models- Sportback Quattro all models- Cabriolet all TDI models
Height-adjustable to -20 to -60mm at front and -30 to -60mm at rearThese shock absorbers are height-adjustable by means of a thread on the lower part of the spring, on the shock absorber body.
TÜV approved

Complete MTS TECHNIK Sport Series height-adjustable threaded combination suspension kit for Volkswagen Golf 1 and Scirocco:

Golf 1 Sedan :
- All petrol and diesel models from 02/1974 to 12/1983 (including GTI)

Golf 1 Cabriolet :
- 1.5L, 1.6L, 1.8L from 01/1979 to 07/1993

Jetta 1 :
- All petrol and diesel models from 08/1979 to 2/1984

Scirocco 1 type 53 :
- 1.1L, 1.3L, 1.5L, 1.6L from 02/1974 to 03/1981

Scirroco 2 type 53B :
- All models from 04/1981 to 07/1992 (including 16S)

ATTENTION: Not suitable for Golf 1 Caddy. On the Golf 1 GTI model, the chassis is already lowered by -15mm compared with the standard chassis. This kit will therefore only allow -20mm front and -65mm rear lowering on GTI!

Kit includes :
- 2 twin-tube gas-hydraulic front shock absorbers, adjustable from -35mm to -80mm
- 2 rear twin-tube gas-hydraulic shock absorbers adjustable from -35mm to -80mm
(Lowering values given as an indication with standard chassis as reference)
- 4 springs
- Stops and dust covers
- Adjusting wrench
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 2 versions (Street and Sport). The springs in this Sport Series kit have been specially designed to offer maximum sportiness without compromise, the ideal cocktail for club outings or track days.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable in hardness.
Shock absorber bodies are galvanized for corrosion resistance and longevity.

Front and rear suspension bearings are not included.
We advise you to replace them with new ones when you change the suspension.

Depending on your lowering settings and the type of rims you're using, you may need to fit spacers for a perfect fit.

This kit comes with a 2-year manufacturer's warranty.

Give your Golf 1 the best, with a high-quality MTS TECHNIK kit!

Coilover Kit MTS Technik for Mazda MX-5 II (NB), lowering the front axle between 20-80 mm, and rear between 20-80 mm. Dedicated for the years of: 01/98 - 10/05, for the engine version: 1.6 / 1.8.

Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Adjustable Shock Absorbers protected by a double layer of gold zinc and adjustments made of anodized aluminum guaranteeing increased corrosion resistance.
Coilover Kit includes springs made by Eibach, the world leader in the sports springs industry.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
The use of twin-tube technology guarantees stable shock absorber performance.

Complete MTS TECHNIK height-adjustable Street Series threaded combination suspension kit for BMW 5 series E28 4 and 6 cylinders with standard chassis or sport suspension and 55 mm diameter strut:
- 518 man. 4cyl carbu 90hp from 11/1980 to 09/1984 (engine code M10B18)- 518i 4cyl 105hp from 05/1981 to 12/1987 (engine code M10B18)- 520i 6cyl 125hp from 11/1980 to 12/1987 (engine code M20B20)- 525e 6cyl 2.7L 125hp from 11/1982 to 12/1987 (engine code M20B27)- 525i 6cyl 150hp from 02/1981 to 11/1987 (engine code M30B25)- 528i 6cyl 184hp from 09/1980 to 12/1987 (engine code M30B28)- 535i 6cyl 3.4L 218hp from 12/1984 to 12/1987 (engine code M30B34)- 524d 6cyl 84hp from 05/1986 to 12/1987 (engine code M21D24)- 524td 6cyl 115hp from 10/1982 to 12/1987 (engine code M21D24T)
ATTENTION: Not suitable for M5 and M535i with M-Tech body kit or for models with air suspension!
Kit includes :- 2 front twin-tube gas-hydraulic shock absorbers adjustable from -25mm to -110mm (with adjustable suspension bearings)- 2 rear twin-tube gas-hydraulic shock absorbers, adjustable from -25mm to -90mm(Lowering values given as an indication with standard chassis as reference)- 4 springs- Stops- Adjusting wrenches- Top mounting nuts and washers
This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Street Series kit strike the perfect balance between comfort and sportiness.
These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.Their setting is fixed, not adjustable in hardness.Height adjustment is independent of spring preload and therefore does not interfere with spring characteristics. This ensures high-performance cushioning in all circumstances, right down to the lowest levels of lowering.Adjustable cup springs enable custom camber adjustment. shock absorber bodies are galvanized for corrosion resistance and long life.
INFORMATION: the original front struts will need to be modified for installation (installation manual supplied). Depending on the lowering value adopted and the type of rims used, spacers may need to be fitted.
This kit comes with a 2-year manufacturer's warranty with no mileage limit.
Give your E28 the best, with a top-quality MTS TECHNIK kit!

Complete MTS TECHNIK Sport Series height-adjustable threaded combination suspension kit for BMW 5 series E28 4 and 6 cylinders with standard chassis or sport suspensions and strut diameter 55 mm :

- 518 man. 4cyl carbu 90hp from 11/1980 to 09/1984 (engine code M10B18)
- 518i 4cyl 105hp from 05/1981 to 12/1987 (engine code M10B18)
- 520i 6cyl 125hp from 11/1980 to 12/1987 (engine code M20B20)
- 525e 6cyl 2.7L 125hp from 11/1982 to 12/1987 (engine code M20B27)
- 525i 6cyl 150hp from 02/1981 to 11/1987 (engine code M30B25)
- 528i 6cyl 184hp from 09/1980 to 12/1987 (engine code M30B28)
- 535i 6cyl 3.4L 218hp from 12/1984 to 12/1987 (engine code M30B34)
- 524d 6cyl 84hp from 05/1986 to 12/1987 (engine code M21D24)
- 524td 6cyl 115hp from 10/1982 to 12/1987 (engine code M21D24T)

ATTENTION: Not suitable for M5 and M535i with M-Tech body kit or for models with air suspension!

Kit includes :
- 2 front twin-tube gas-hydraulic shock absorbers adjustable from -25mm to -110mm (with adjustable suspension bearings)
- 2 rear twin-tube gas-hydraulic shock absorbers, adjustable from -25mm to -90mm
(Lowering values given as an indication with standard chassis as reference)
- 4 springs
- Stops
- Adjusting wrenches
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Sport Series kit have been specially designed to offer maximum sportiness without compromise, the ideal cocktail for club outings or track days.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable for hardness.
Height adjustment is independent of spring preload and therefore does not interfere with spring characteristics. This ensures high-performance cushioning in all circumstances, right down to the lowest levels of lowering.
Adjustable cup springs enable custom camber adjustment.
shock absorber bodies are galvanized for corrosion resistance and longevity.

INFORMATION: the original front struts will need to be modified for installation (installation manual supplied). Depending on the lowering value adopted and the type of rims used, spacers may need to be fitted.

This kit comes with a 2-year manufacturer's warranty with no mileage limit.

Give your E28 the best, with a top-quality MTS TECHNIK kit!

Blue Line threaded combination kit for Mini :
Mini R55 Clubman :
- Cooper 1.6L 120hp from 10/2006 to 07/2010 (engine code N12B16)- Cooper S 1.6L 175hp from 10/2006 to 07/2010 (engine code N14B16)- Cooper S JCW 1.6L 211hp from 11/2007 to 07/2010 (engine code N14B16)- Cooper d 1.6L 109hp from 11/2006 to 07/2010 (engine code W16D16)- One 1.4L 95hp from 08/2008 to 02/2010 (engine code N12B14)- Cooper 1.6L 122hp from 03/2009 to 06/2014 (engine code N16B16)- Cooper S 1.6L 184hp from 06/2009 to 06/2014 (engine code N18B16)- Cooper S JCW 1.6L 211hp from 01/2010 to 06/2012 (engine code N14B16)- Cooper S JCW 1.6L 211hp from 11/2011 to 06/2014 (engine code N18B16)- Cooper SD 2.0L 143hp from 05/2009 to 06/2014 (engine code N47C20)- Cooper D 1.6L 112hp from 04/2009 to 06/2014 (engine code N47C16)- Cooper D 2.0L 112hp from 11/2010 to 06/2014 (engine code N47C20)- One 1.6L 98hp from 03/2009 to 06/2014 (engine code N16B16)- One D 1.6L 90hp from 01/2010 to 06/2014 (engine code N47C16)
Worth knowing:
- Front and rear adjustment range from 25 to -55 mm

Threaded combination kit for Peugeot 206 all models
Combined front and rearthreaded springs and shock absorbers.
Adjustable up to -50mm at the front, height adjustment at the rear via torsion bars.
Suitable for all models, 3 or 5-door, station wagon, including S16, GTI, RC.

REDLINE threaded shock absorber kit for Volkswagen Touran
For VW Touran (1T) all TDI models from 2003 to 2015
Height-adjustable down to -20 to -60mm at front and -30 to -60mm at rearThese shock absorbers are height-adjustable by means of a thread on the lower part of the spring, on the shock absorber body.
TÜV approved

REDLINE threaded shock absorber kit for SEAT Leon 3 (5F)
For SEAT Leon 3 (5F) all models with torsion rear axle
On the Leon 3, smaller engines have a torsion rear axle, while more powerful engines have a multi-link rear axle. We recommend that you check your vehicle before ordering.
Not suitable for models equipped with DCC (Electronic Suspension Control).
Height-adjustable to -35 to -65mm at front and -40 to -65mm at rearThese shock absorbers are height-adjustable by means of a thread on the lower part of the spring, on the shock absorber body.
TÜV approved

REDLINE threaded shock absorber kit for Audi A4 (B6)
For Audi A4 (B6) :- Sedan Quattro all models- Avant (Estate) all models- Front Quattro all models- Cabriolet all models- Cabriolet Quattro all models
Height-adjustable to -30 to -60mm at front and -40 to -60mm at rearThese shock absorbers are height-adjustable by means of a thread on the lower part of the spring, on the shock absorber body.
Galvanized shock absorbers with powder-coated cold-coiled springs
TÜV-approved

REDLINE threaded shock absorber kit for Audi A4 (B7)
For Audi A4 (B7) saloon all petrol and diesel models except QuattroNot suitable for Quattro and Estate versions
Height-adjustable to -30 to -60mm at front and -40 to -60mm at rearThese shock absorbers are height-adjustable by means of a thread on the lower part of the spring, on the shock absorber body.
Galvanized shock absorbers with powder-coated cold-coiled springs
TÜV-approved

REDLINE threaded shock absorber kit for Audi A4 (B7)
For Audi A4 (B7) :- Sedan Quattro all models- Avant (Estate) all models- Avant Quattro all models- Cabriolet all models- Cabriolet Quattro all models
Height-adjustable to -30 to -60mm at front and -40 to -60mm at rearThese shock absorbers are height-adjustable by means of a thread on the lower part of the spring, on the shock absorber body.
Galvanized shock absorbers with powder-coated cold-coiled springs
TÜV-approved

REDLINE threaded shock absorber kit for Volkswagen Golf 7
For VW Golf 7 sedan all models with torsion rear axle and front axle with maximum load 965kg
On the Golf 7, smaller engines have a torsion rear axle, while more powerful engines have a multi-link rear axle. We recommend that you check this on your vehicle before ordering.
The permissible front load can be found on the vehicle's tare plate.
Not suitable for models equipped with DCC (Electronic Suspension Control)
Height-adjustable to -35 to -65mm at front and -40 to -65mm at rearThese shock absorbers are height-adjustable by means of a thread on the lower part of the spring, on the shock absorber body.
TÜV approved

REDLINE threaded shock absorber kit for SEAT Leon 3
For SEAT Leon 3 (5F) all models with multi-link rear axle
On the Leon 3, smaller engines have a torsion rear axle, while more powerful engines have a multi-link rear axle. We recommend that you check your vehicle before ordering.
Not suitable for models equipped with DCC (Electronic Suspension Control).
Height-adjustable to -35 to -65mm at front and -40 to -65mm at rearThese shock absorbers are height-adjustable by means of a thread on the lower part of the spring, on the shock absorber body.
TÜV approved

REDLINE threaded shock absorber kit for Volkswagen Golf 5
For VW Golf 5 : - Golf 5 Variant Petrol only- Golf 5 Plus Petrol only
Height-adjustable to -20 to -60mm at front and -30 to -60mm at rearThese shock absorbers are height-adjustable by means of a thread on the lower part of the spring, on the shock absorber body.
TÜV approved