Coil over suspension kit

Front and rear threaded springs and shocks from SSP.

Compatible with Volkswagen Golf 3 and Vento
(Not suitable for Syncro or Estate versions)

Galvanised shock absorber body for good corrosion resistance.
Adjustable in height from -40 to -70 mm.
This non-adjustable fixed calibration kit is firm and sporty.

Combined front and rear coilovers and shocks from SSP.

Compatible with Volkswagen Golf 2 and Jetta 2
(Not suitable for Rally, Country, Syncro versions)

Galvanised shock absorber body for good corrosion resistance.
Adjustable in height from -40 to -70 mm.
This non-adjustable fixed calibration kit is firm and sporty.

The extremSport threaded suspension system for Golf 1 and Scirocco is adjustable in height and hardness. By equipping your vehicle with threaded suspension units, you ensure excellent roadholding.

Unlike standard suspension systems, this compact spring and shock absorber unit allows you to customize its settings:
- Adjustable hardness, 16 positions
- Height-adjustable from -40 to -80 mm
- TUV-approved

This automotive part can be used for :
- motorsports competition
- customization, as it allows the ride height to be adjusted to a low position, and for the mechanics enthusiast.

These eXtremSport threaded combinations are compatible with the following vehicle models:
- Golf 1 Sedan all models from 1974 to 1984

MECATECHNIC selection threaded combined suspension kit for BMW series 3 E36 Compact petrol and diesel:

- 316i 102 hp from 03/1994 to 12/1998 (engine code M43B16)
- 316i 105 hp from 01/1999 to 07/2000 (engine code M43B19)
- 318ti 140 hp from 08/1994 to 12/1995 (engine code M42B18)
- 318ti 140 hp from 01/1996 to 07/2000 (engine code M44B19)
- 318tds 90 hp from 03/1995 to 07/2000 (engine code M41D17)
- 323ti 170 hp from 06/1997 to 07/2000 (engine code M52B25)

The shock absorbers are adjustable in height from -40mm to -65mm for the front and from -30mm to -60mm for the rear (standard chassis in reference).
The calibration is fixed and not adjustable in hardness.
Cold wound springs
EPS powder coating
Galvanized shock absorbers

Adjustable stabilizer bar links for lowering are not included. We recommend that you order the reference BJ42243 in addition.

Kit including the 4 shock absorbers plus the springs, allows to lower the ground clearance of your vehicle up to -70mm, adjustment by wheels,

For A4 (B7):
- All models Saloon, Avant and Cabriolet
(including Quattro)

Kit including the 4 shock absorbers plus the springs, allows to lower the ground clearance of your vehicle up to -70mm, adjustment by wheels,

For A4 (B6) and (B7):
- All models Saloon, Avant and Cabriolet
(including Quattro)

Spring and shock absorber coilovers for Mazda MX-5 NB and NBFL

For NB and NBFL all models
Increased rigidity and lowered centre of gravity for top handling!

The coilover enables you to adjust the ride height of your MX-5. The shock absorber coilover has an adjustment ring that can lower the body from -20 to -70mm

The complete kit for the whole vehicle is fitted instead of the original shock absorbers, with the original cups and bearings
No modifications required, you can fit it with the original suspension again at any time!

For Golf 4 all engines except estate, 4 x 4 and cabriolet versions

For A3 (8L) except Quattro (4x4)
- 1.6
- 1.8
- 1.8 20V Turbo
- 1.9 TDi

Kit including 4 shock absorbers with springs adjustable in height up to - 70 mm,

For Ibiza from 1993 to 08/1999 :
- All models

For Polo 6N and Polo Classic / Variant 6KV from 1995 ->1999
Height-adjustable to -70 mm by thread

Combined front and rear coilovers and shocks from SSP.

Compatible with Volkswagen Golf 1 and Scirocco (except Caddy)

Galvanised shock absorber body for good corrosion resistance.
Adjustable in height from -40 to -70 mm.
This non-adjustable fixed calibration kit is firm and sporty.

Complete MTS TECHNIK Comfort Series height-adjustable threaded combination suspension kit for Volkswagen Golf 1 and Scirocco:

Golf 1 Sedan :
- All petrol and diesel models from 02/1974 to 12/1983 (including GTI)

Golf 1 Cabriolet :
- 1.5L, 1.6L, 1.8L from 01/1979 to 07/1993

Jetta 1 :
- All petrol and diesel models from 08/1979 to 2/1984

Scirocco 1 type 53 :
- 1.1L, 1.3L, 1.5L, 1.6L from 02/1974 to 03/1981

Scirroco 2 type 53B :
- All models from 04/1981 to 07/1992 (including 16S)

ATTENTION: Not suitable for Golf 1 Caddy. On the Golf 1 GTI model, the chassis is already lowered by -15mm compared with the standard chassis. This kit will therefore only allow -20mm front and -65mm rear lowering on GTI!

Kit includes :
- 2 twin-tube gas-hydraulic front shock absorbers, adjustable from -35mm to -80mm
- 2 rear twin-tube gas-hydraulic shock absorbers adjustable from -35mm to -80mm
(Lowering values given as an indication with standard chassis as reference)
- 4 springs
- Stops and dust covers
- Adjusting wrench
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Comfort Series kit have been specially designed to maintain maximum suspension comfort in all circumstances, without sacrificing roadholding.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable in hardness.
Shock absorber bodies are galvanized for corrosion resistance and longevity.

Front and rear suspension bearings are not included.
We advise you to replace them with new ones when you change the suspension.

Depending on your lowering settings and the type of rims you're using, you may need to fit spacers for a perfect fit.

This kit comes with a 2-year manufacturer's warranty.

Give your Golf 1 the best, with a high-quality MTS TECHNIK kit!

MTS TECHNIK threaded combination suspension kit for Volkswagen Transporter T25 T3
For VW Transporter T25, T3 all models from 1979 to 1992 except SyncroMax front load: 1300kgMax rear load: 1400kg
Height-adjustable shock absorbers from -40 to -120mm at front and -45 to -70mm at rear.The shock absorbers are twin-tube gas-hydraulic versions.Their setting is fixed, so their hardness cannot be adjusted.The MTS factory setting is firm, giving it a truly sporty feel.Shock absorber bodies are galvanized for corrosion resistance.Urethane shock absorber bumper
A guarantee of reliability, this MTS Technik kit is assembled with main springs developed and manufactured by EIBACH and is TÜV approved.

Complete height-adjustable threaded suspension kit for Skoda Fabia 6Y:

- All petrol and diesel models from 1999 to 2007

Kit includes :
- 2 front shock absorbers adjustable from -20mm to -70mm
- 2 rear shock absorbers adjustable from -20mm to -70mm
(Lowering values given as a guide with standard chassis as reference)
- 4 springs
- Adjustment key with lug

Front and rear suspension bearings are not included.
We recommend replacing them with new ones when replacing the suspension.

Depending on your lowering settings and the type of rims you're using, you may need to replace your sway-bar links with adjustable models, and fit spacers to ensure a perfect fit.

Complete BlueLine threaded combination kit for Bmw 3 Series :
- Compatible with all Bmw 3 Series F30 Sedan and F31 Touring versions from 02/2011 until 06/2019 except type IX and XD 4-wheel drive models.
Please note:
- Not suitable with the electronically adjustabledynamic shock absorber option.
- Complete kit includes front and rear shock absorbers and springs .
- Originalshock absorber cup compatible.
- Shock absorbers are height-adjustable from -35mm to -65mm for front and rear.
- Cold-coiled springs with EPS powder coating.

MTS TECHNIK COMFORT rangethreaded combination suspension kit for Volkswagen Polo 5
For VW Polo V (6R) all petrol and diesel models including Polo GTI and Polo WRC
COMFORT range: height-adjustable, with a softer setting than the STREET range for comfort and handling close to the original suspension.
Height-adjustable shock absorbers from -15 to -60mm.The shock absorbers are twin-tube gas-hydraulic versions.Their setting is fixed, so their hardness cannot be adjusted.Shock absorber bodies are galvanized for corrosion resistance.Urethane shock absorber stop
A guarantee of reliability, this MTS Technik kit is assembled with main springs developed and manufactured by EIBACH and is TÜV approved.

REDLINE threaded shock absorber kit for Volkswagen Polo 5
For VW Polo V (6R) all models from 2008 to 2017
Height-adjustable up to -20 to -55mm front and rear loweringThese shock absorbers are height-adjustable by means of a thread on the lower part of the spring, on the shock absorber body.
Galvanized shock absorbers, cold-coiled and powder-coated springsTÜV-approved

REDLINE threaded shock absorber kit for Volkswagen Golf 5
For VW Golf 5 : - Golf 5 Variant Petrol only- Golf 5 Plus Petrol only
Height-adjustable to -20 to -60mm at front and -30 to -60mm at rearThese shock absorbers are height-adjustable by means of a thread on the lower part of the spring, on the shock absorber body.
TÜV approved

REDLINE threaded shock absorber kit for Volkswagen Golf 5
For VW Golf 5 : - 4Motion all petrol and diesel models- Golf 5 Variant TDI only- Golf 5 Plus TDI only
Height-adjustable up to -20 to -60 mm at the front and -30 to -60 mm at the rearThese shock absorbers are height-adjustable by means of a thread on the lower part of the spring, on the shock absorber body.
TÜV approved