Silent blocks

2 POWERFLEX Road Series silentblocs front anti-roll bar N°1 for Porsche 911 type 964 :

- 964 3.6 Carrera 2 from 1989 to 1994
- 964 3.6 Carrera 4 from 1989 to 1994

These purple polyurethane silent blocks replace the original ones. They are perfectly suited for normal to sustained use on the road.

For stabilizer bar of diameter 20 mm

Quantity needed per vehicle : 1 Kit

Set of 2 heavy duty silentblocks located on the rear swing arm of the Mazda RX-8

- Position 4 on the diagram (see photo)

Complete kit for left and right arms
Fits all Mazda RX-8 models

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span and fitting them with half-silentblocks is much easier.

Set of 2 heavy duty silentblocks located on the rear anti-roll bar of the Mazda MX-5 NC and NCFL

- Position 8 on the diagram (see photo)

For 12mm anti-roll bar

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span

2 rear anti-roll bar bushes for:
- 996
- 986 Boxster

Suitable for Audi A4 (B5) from 1994 to 2001 and Audi A6 (C5) from 1998 to 2005, all versions including 'S' and 'RS' series.

Rear lower coupling arm bushes for:
- 986 Boxster all models from 1997 to 2004
- 987 Boxster and Cayman all models from 2005 to 2012
- 996 all models from 1998 to 2005
- 997 all models from 2005 to 2012 (excluding GT2-RS)

POWERFLEX silentblocks on rear guide arm for Bmw 7 series:

- Compatible with all Bmw 7 Series E65 and E66 versions from 02/2000 to 10/2006 including Alpina B7 engine code n62.

These reinforced models offer better rear axle guidance and longer life than the original version.

Position 13 on diagram.

Sold in pairs.

Front inner anti-roll bar bush for Porsche 924 :

- 924 2.5 S - 150 hp from 1986 to 1987
- 924 2.5 S - 160 hp from 1988

Only for Porsche 924 with M030 sport chassis

For stabilizer bar of 23 mm

Quantity required per vehicle : 2

Sold individually

4 Powerflex Black Series front anti-roll bar drop link bushes for:
- 911 from 1965 to 1973
- 912
- 914

Upper rear suspension leaf support for Porsche 924 :
- 924 2.0 - 125 hp from chassis number : 92481 00777 (Europe)92482 01226 (USA Canada)92483 30099 (Japan)- 924 2.5 S - 150 hp (M44.07/M44.08) from 1986 to 1987- 924 2.5 S - 160 hp (M44.09/M44.10) from 1988- 924 2.0 Turbo - 170 hp (M31.01) from 1979 to 1980- 924 2.0 Turbo - 177 hp (M31.03) from 1981 to 1985- 924 2.0 Carrera GT - 210 hp (M31.50) from 1981
Please note: this part is not suitable for the very first 924s (1976-1977), which have a different rear axle.
Quantity required per vehicle: 2

For models with 20.7 mm anti-roll bar (code 0BE)

Rear wishbone bushes for:

- 993 from 1994 to 1998

Inner rear suspension arm bushes for:
- 996 all models from 1998 to 2005
- 997 all models from 2005 to 2012

Front wishbone silencer BGA right for Bmw 3 Series: - Compatible with all Bmw 3 Series E46 Sedan, Touring, Compact, Coupé and Cabriolet versions from 11/1999 to 09/2006 except 4-wheel drive type ix and Bmw E46 M3 engine code s54. Not suitable with option S338A chassis Sport M II.

These reinforced polyurethane models located in the centre of the rear axle support (see number 25 on the diagram) offer better guidance and increased durability compared to an original version

For Roadster (E85)->09/06:
- 2.2 i M54
- 2.5 i M54
- 2.5 i N52
- 2.5 si N52
- 3.0 i M54
- 3.0 si N52 (all years)

For Coupé (E86):
- 3.0 si N52 (all years)

2 rear anti-roll bar bushes for:
- 996
- 986 Boxster

These reinforced models located on the upper front axle control arms on the left or right chassis (inner) side (see No. 17 on the diagram) offer better guidance under pressure as well as greater durability compared with the original part

For E36 except Compact:
- 316 to 328 Petrol and Diesel including M3

These bushes allow the trailing arm to be fitted on the suspension arm

To replace the original rubber and improve front axle guidance
Easy to assemble thanks to 2-part design

For E39:
- Touring, all models
- Saloon 530 d 184/193hp up to ->03/99 with manual gearbox

Improve rear axle performance for better road handling.
To replace original silent blocks reference 33311094036

Easy to assemble thanks to 2-part design

Set of two polyurethane silent blocks for the front lower suspension arms
Position: in front of the wishbone.

For VOLKSWAGEN Transporter T4 from 1990 to 1996 up to chassis N° ->70-T-199999.
including Synchro version (4 x 4).