Silent blocks

Silentblocs POWERFLEX Black Series front lower control arms for Porsche 911 type 996:

- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera from 1998 to 2001
- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 3.6 Turbo - 420 hp (M96.70) from 2000 to 2005
- 996 3.6 Turbo X50 - 450 hp (M96.70) from 2001 to 2005
- 996 3.6 Turbo S - 450 hp (M96.70) from 2005
- 996 3.6 GT2 - 462 hp (M96.70SL) from 2001 to 2004
- 996 3.6 GT2 - 483 hp (M96.70SL) from 2005

This kit is suitable for the 2 front lower links (right-left) and allows front camber angle adjustment of 0.75° or less.

These black polyurethane block silents replace theoriginal ones. They are ideal for track use. They are stronger and stiffer than POWERFLEX Road Series. They offer very precise drivetrain guidance, so you can get the most out of your chassis. Ideal for time-hunting!

As the arm's original silent blocks are not available in detail, replacing them with these POWERFLEXs saves you having to replace the entire front arm.

Ref Powerflex: PFF57-801BLK

Set of two polyurethane silent blocks for the front upper suspension arms
Position: in front of the wishbone.

For VOLKSWAGEN Transporter T4 from 1990 to 2003, including Synchro version (4X4):

POWERFLEX rear arm silencer for Bmw 6 Series :

- Compatible with all Bmw 6 Series E63 Coupé and E64 Cabriolet versions from 05/2002 to 07/2010 including M6 version engine code s85.

These reinforced models offer improved guidance of the rear axle under load, as well as a longer service life than the original version.

Position 12 on diagram.

Sold in pairs.

These reinforced models offer better guidance of the rear axle under pressure as well as greater durability compared with the original part,
Position 15 on the diagram, located on the top of the integral link

For X5 (E53):
- All models

Kit of 4 nozzles in polyurethane. Easy replacement of the arm seals and internal bearings of the front axle body.

For VW Combi Split T1
Years: 03/1955 ->07/1963
Chassis no. 117 902 ->1 144 281.

These reinforced models offer better guidance of the rear axle under pressure as well as greater durability compared with the original part,
Position 15 on the diagram, located on the top of the integral link

For Saloon & Touring:
- All models, including M5

Front left rear lower link silentblock for:
- MX5 NC and NCFL

Original MAZDA part.

These polyurethane-reinforced models, located on the lower suspension arms of the front axle (see number 2 on the diagram), offer better downforce control and longer service life than the original version,

For E90, E91, E92

Silent axle block Meyle OE for BMW 5 Series E34 Sedan and Touring :

- Compatible with all Bmw 5 Series E34 Sedan and Touring models only petrol version from 4 to 8 cylinders including BMW 5 Series E34 m5.

This rear axle part offers optimized quality compared to the original, design defects are corrected, and it is stronger for better durability and improved roadholding.

Right rear bushing for front lower link on:
- MX5 NC and NCFL

Original MAZDA part.

Rubber stopper on rear suspension arm
Left or right, sold individually.
OriginalClassic Parts unit

For Kombi Split & Bay Window, 03/1955 ->07/1979

These reinforced models offer better guidance of the front axle under pressure as well as greater durability compared with the original part,
Position 2 on the diagram,

For E60 & E61:
- All models, including M5
(Except 4-wheel drive xi/xd version)

For E60 LCI & E61 LCI:
- All models, including M5
(Except 4-wheel drive xi/xd version)

Set of two POWERFLEX polyurethane exterior silent blocks for the rear wishbone for a VOLKSWAGEN Transporter T4 from 1990 to 2003

2 front anti-roll bar silentblocs for Porsche :
- 996 all versions from 1997 to 2005
- 986 Boxster and Boxster S from 1997 to 2004
- 987 Boxster and Boxster S from 2005 to 2008
- 987 Cayman and Cayman S from 2006 to 2008

For E36 all models except M3

Rear lower coupling arm bushes for:
- 986 Boxster all models from 1997 to 2004
- 987 Boxster and Cayman all models from 2005 to 2012
- 996 all models from 1998 to 2005
- 997 all models from 2005 to 2012 (excluding GT2-RS)

POWERFLEX rear sway bar silencers for Bmw 6 Series :

Bmw E63 :

- 630i 6 cyl 258hp from 02/2004 to 07/2007 (engine code n52b30a)
- 630i 6 cyl 272hp from 04/2006 to 07/2010 (engine code n53b30a)
- 630i 6 cyl 258hp from 05/2006 to 07/2010 (engine code n52b30n)

Please note! Not suitable for Bmw 6 Series E63 Coupé v8 and v10 engine versions and all Bmw 6 Series E64 Cabriolet versions.

Need 2 quantities per vehicle.

Sold individually.

For stabiliser bar with 18mm diameter

Silentbloc steering lever for Bmw 7 Series E38:

- Compatible with all Bmw 7 Series E38 petrol and diesel versions from 07/1993 to 07/2001 including 750i v12.

2 POWERFLEX Road Series silentblocs rear anti-roll bar N°4 for Porsche 911 type 964 C2 Tiptronic :

- 964 3.6 Carrera 2 Tiptronic from 1990 to 1994

These purple polyurethane silent blocks replace the original ones. They are perfectly suited for normal to sustained use on the road.

For stabilizer bar of diameter 19 mm

Quantity needed per vehicle : 1 Kit