Silent blocks

Set of two POWERFLEX polyurethane exterior silent blocks for the rear wishbone for a VOLKSWAGEN Transporter T4 from 1990 to 2003

Set of two POWERFLEX exterior polyurethane silent blocks for a 19 mm sway bar for a VOLKSWAGEN Transporter T25 from 1986 to 1992 from chassis n°24-G-118222->

Set of two polyurethane silent blocks for the front lower suspension arms
Position: in front of the wishbone.

For VOLKSWAGEN Transporter T4 from 1997 to 2003 from chassis n° 70-T-200001->.
including Synchro version (4x4).

Set of two polyurethane silent blocks for the front lower suspension arms
14 mm diameter.
Position: behind the wishbone.

For VOLKSWAGEN Transporter T4 from 1991 to 2003 since chassis N° 70-M-083343->

Set of two polyurethane silent blocks for the front upper suspension arms
Position: in front of the wishbone.

For VOLKSWAGEN Transporter T4 from 1990 to 2003, including Synchro version (4X4):

Set of two polyurethane silent blocks for the front upper suspension arms
Position: behind the wishbone.

For VOLKSWAGEN Transporter T4 from 1990 to 2003, including Synchro version (4X4):

Set of two POWERFLEX interior polyurethane silent blocks for a 19 mm sway bar for a VOLKSWAGEN Transporter T25 from 1986 to 1992 from chassis n°24-G-118222->

Set of two POWERFLEX interior polyurethane silent blocks for a 21 mm sway bar for a VOLKSWAGEN Transporter T25 from 1979 to 1985 up to chassis n°24-E-145000

Rear suspension arm silentbloc
Leftor right-hand side, sold per unit.
Position : outside the wishbone.

For VW Transporter T4 type 70/7D
All models 09/1990 ->06/2003
Including Syncro version (4 x 4).

For Passat 3 saloon 04/88 -> 09/93:
- 1.8 107hp (PF)
- 1.8 112hp (PB)
- 1.8 136hp (KR)
- 2.0 136hp (9A)

For Passat 3 estate 04/88 -> 09/93:
- 2.0 106hp (ACX)
- 2.0 115hp (2E)
- 2.8 174hp (AAA)

For Passat 3 Syncro versions 90->93:
- 1.8 160hp (PG)
- 2.0 115hp (2E, ADY, AGG)
- 2.9 190hp (ABV)

ForPassat 3 saloon or estate 10/93 -> 09/96:
- 1.6 100hp (AEK, AFT)
- 1.8 75hp (AAM)
- 1.8 90hp (ABS, ADZ)
- 1.9 turbo Diesel 75hp (AAZ)
-1.9 TDI 90hp (1Z, AHU)
- 1.9 TDI 110hp (AFN)
- 2.0 106hp (ACX)
-2.0 107hp (AEP)
- 2.0 115hp (2E, ADY, AGG)
- 2.0 150hp (ABF)
- 2.8174hp (AAA)

Left VEMOwishbonebracket for Seat Ibiza 6L up to chassis number 6L-8-200 000 :
- 1.2L 60hp from 06/2007 to 05/2008 (engine code BBM) -> up to chassis number 6L-8-209 000- 1.2L 64hp from 02/2002 to 06/2006 (AZQ and BME engine codes)- 1.2L 12V 70hp from 05/2006 to 11/2009 (engine code BXV)- 1.4L 16V 75hp from 02/2002 to 12/2007 (engine code BKY)- 1.4L 16V 86hp from 05/2006 to 11/2009 (engine code BXW)- 1.4L 16V 100hp from 02/2002 to 11/2009 (engine code BBZ)- 1.4L TDI 70hp from 05/2005 to 11/2009 (engine code BNM)- 1.4L TDI 75hp from 05/2002 to 12/2005 (engine code AMF)- 1.4L TDI 80hp from 06/2005 to 11/2009 (BMS and BNV engine codes)- 1.6L 101hp from 02/2003 to 11/2009 (engine code BAH)- 1.6L 16V 105hp from 11/2006 to 11/2009 (engine code BTS)- 1.8T FR 150hp from 12/2003 to 05/2008 (engine code BJX)- 1.9L SDI 64hp from 02/2002 to 12/2005 (engine code ASY)- 1.9L TDI 100hp from 02/2002 to 11/2009 (engine codes ATD, AXR and BMT)- 1.9L TDI 131hp from 02/2002 to 11/2009 (engine codes ASZ and BLT)- 2.0L 116hp from 04/2002 to 11/2009 (engine code BBX)

Rubber bumpers for left and right front axles. Sold in pairs.

For VW Combi Split T1
Years : 1950 ->07/1963
until chassis N°->1 144 281.

Kit of 4 nozzles in polyurethane. Easy replacement of the arm seals and internal bearings of the front axle body.

For VW Combi Split T1
Years: 03/1955 ->07/1963
Chassis no. 117 902 ->1 144 281.

Kit of 4 polyurethane nozzles. Easily replaces arm seals and front axle body internal bearings.

For VW Combi Split T1
Years: 08/1963 ->07/1967
Chassis N° 1 144 282 ->217 148 459.

POWERFLEX brand polyurethane front suspension arm silentblocs kit for BMW series 3 E46 :

- All models (except M3 and 4 wheel drive)

These reinforced models located on the rear part of the front axle wishbones (see number 1 on the diagram) offer better support guidance as well as increased longevity compared to an original version.

External diameter : 66 mm

ATTENTION : Check your diameter because there is a 60 mm assembly !

Sold by 2

These reinforced models located on the rear part of the front suspension arms (see number 1 on the diagram) offer a better guidance in support as well as an increased longevity compared to an original version

For Roadster (E85) and Coupé (E86):
- All models with 66mm diameter (except Z4 M)
Check your diameter because there is a 60mm assembly

Pair of eccentric silentblocs in the rear position of the front suspension triangle for BMW series 3 E46 4-wheel drive only:

Sedan:
- 325xi 4x4 192cv phase 2 from 01/2000 to 12/2004 (engine code M54B25)
- 330xi 4x4 231cv phase 1 from 09/1999 to 08/2001 (engine code M54B30)
- 330xi 4x4 231cv phase 2 from 09/2001 to 12/2004 (engine code M54B30)
- 330xd 4x4 184hp phase 1 from 01/2000 to 08/2001 (engine code M57D30)
- 330xd 4x4 204hp phase 2 from 09/2002 to 12/2004 (engine code M57D30TU)

Touring:
- 325xi 4x4 192hp phase 2 from 02/2000 to 05/2005 (engine code M54B25)
- 330xi 4x4 231hp phase 1 from 01/2000 to 08/2001 (engine code M54B30)
- 330xi 4x4 231cv phase 2 from 09/2001 to 05/2005 (engine code M54B30)
- 330xd 4x4 184hp phase 1 from 01/2000 to 08/2001 (engine code M57D30)
- 330xd 4x4 184hp phase 2 from 09/2001 to 03/2003 (engine code M57D30)
- 330xd 4x4 204hp phase 2 from 08/2002 to 05/2005 (engine code M57D30TU)

Assembly advice: the silentbloc must be fitted so that the eccentric pushes the arm towards the middle of the car. The outer bush of the silentbloc must be positioned so that the central bush of the eccentric is directed towards the inside of the vehicle while being aligned horizontally with the triangle.

Quantity required: 2 silentblocs per vehicle (right side and left side)
This product is sold by 2.

For Coupé & Cabriolet:
- M3 S54

Silentbloc de bras de suspension supérieur gauche ou droit sélection MECATECHNIC pour BMW série 5 E34 Berline et Touring :

Berline :
- 530i 188cv phase 1 du 06/1987 au 05/1990 (code moteur M30B30)
- 530i V8 218cv phase 1 du 08/1992 au 03/1994 (code moteur M60B30)
- 530i V8 218cv phase 2 du 04/1994 au 12/1995 (code moteur M60B30)  
- 535i 211cv phase 1 du 03/1987 au 04/1993 (code moteur M30B35)
- 540i V8 286cv phase 1 du 03/1992 au 03/1994 (code moteur M60B40)
- 540i V8 286cv phase 2 du 04/1994 au 12/1995 (code moteur M60B40)   
- 524td 115cv phase 1 du 07/1987 au 08/1991 (code moteur M21D24)   
- 525td 115cv phase 1 du 12/1992 au 03/1994 (code moteur M51D25)
- 525td 115cv phase 2 du 04/1994 au 11/1995 (code moteur M51D25)
- 525tds phase 1 143cv du 02/1990 au 03/1994 (code moteur M51D25)
- 525tds phase 2 143cv du 04/1994 au 12/1995 (code moteur M51D25)

Touring :
- 530i V8 218cv phase 1 du 05/1992 au 03/1994 (code moteur M60B30)
- 530i V8 218cv phase 2 du 04/1994 au 06/1996 (code moteur M60B30)        
- 540i V8 286cv phase 1 du 05/1993 au 03/1994 (code moteur M60B40)
- 540i V8 286cv phase 2 du 04/1994 au 06/1996 (code moteur M60B40)     
- 525td 115cv phase 1 du 11/1992 au 03/1994 (code moteur M51D25)
- 525td 115cv phase 2 du 04/1994 au 05/1996 (code moteur M51D25)   
- 525tds 143cv phase 1 du 07/1991 au 03/1994 (code moteur M51D25)
- 525tds 143cv phase 2 du 04/1994 au 06/1996 (code moteur M51D25)

Dimensions :
- Hauteur : 48mm
- Diamètre extérieur : 58mm
- Diamètre intérieur : 14mm

Quantité nécessaire par véhicule : 2

Ce produit est vendu à l'unité.

Eccentric silent-blocks for E36 M3