Jacks

Gas shock absorber for tailgate,

For A3 (8P) since 24.05.2004:
- All 3 door models

Gas shock absorber for tailgate,

For A3 (8P):
- All Sportback models

For A3 (8L) up to chassis 8L-2-009 000

The tailgate actuator is essential to ensure that the tailgate opens and holds securely. If your actuator is defective or worn, it's important to replace it quickly to prevent the tailgate from falling out or becoming difficult to open.This cylinder is fitted with a piston which, when compressed, releases a gas to exert a lifting force.They are often used on heavier tailgates or doors with integrated windows, providing more power to hold the tailgate in place.To fit, remove the old cylinder, using a screwdriver or wrench to remove the clips that hold the cylinder in place. Beware of residual pressure if the cylinder is still under tension.To install the new cylinder, place it in the mounting brackets and clip into place. Check that the actuator is correctly installed and working before closing the tailgate.
This 910 Newton tailgate actuator fits VW Transporter T4 Multivan, Kombi, California, Syncro (4x4) from 08/1992 to 06/2003 from chassis no. 70-N-151782.
Need 2 per vehicle, sold individually.Economical version, good value for money

Hydro-Lift jack for tailgate
2 required per vehicle, sold per unit.
Original Volkswagen Classic Parts.

For VW Transporter T4 type 70, Bus
Multivan, California, Syncro (4 x 4)
Years: 09/1990 ->07/1992
up to chassis no.->70-N-151 781.

Tailgate spring cylinder for VW Transporter T25 / T3 from 05/1979 to 07/1992.Need 2 per vehicle, sold individually.Original Volkswagen Classic Parts (Original equipment brand Stabilus)

Fixing pin for tailgate jack on Multivan / Caravelle or side panel on pickup / Doka for VW Transporter T25 from 05/1979 to 07/1992.

Reinforced front hood cylinder 20% more powerful than standard for Porsche 911 type G from 1974 to 1989 :
- 911 2.7 from 1974 to 1977- 911 S 2.7 from 1974 to 1977- 911 Carrera 2.7 from 1974 to 1976- 911 Carrera 3.0 from 1976 to 1977- 911 SC 3.0 from 1978 to 1983- 911 Carrera 3.2 from 1984 to 1989
- 911 Turbo 3.0 from 1975 to 1977- 911 Turbo 3.3 from 1978 to 1989
2 cylinders are required for the vehicle.
Not recommended for lightweight composite/kevlar carbon hoods.
Sold individually

Ridex hood jack for Bmw 5 Series:
- Compatible with all Bmw 5 Series E34 Sedan and Touring versions from 09/1988 to 12/1996 including model 540i engine code m60.
Need 2 cylinders per vehicle.
Sold individually.

Ball pin flap support for tailgate for Golf Mk2, Golf Mk3, Passat B3, Passat B4, Polo Mk1, Transporter T2, Transporter T3 and Transporter T4.

Also suitable for: Golf Mk3 Syncro, Golf Mk3 Variant, Jetta Mk2, Passat B3 und B4 Syncro and Transporter T3 Syncro.

Front hood jack for Porsche Boxster type 981 from 2013 to 2016 :

- 981 2.7 Boxster - 265 hp (MA1.22) from 2013 to 2016
- 981 3.4 Boxster S - 315 hp (MA1.23) from 2013 to 2016
- 981 3.4 Boxster GTS - 330 hp (MA1.23) from 2015 to 2016
- 981 3.8 Boxster Spyder - 375 hp (MA1.24) from 2016

The cylinder is sold individually , and two quantities are required per vehicle.

Front hood cylinder for Porsche Cayman type 981 from 2014 to 2016:

- 981 2.7 Cayman - 275 hp (MA1.22) from 2014 to 2016
- 981 3.4 Cayman S - 325 hp (MA1.23) from 2014 to 2016
- 981 3.4 Cayman GTS - 340 hp (MA1.23) from 2015 to 2016
- 981 3.8 Cayman GT4 - 385 hp (MA1.24) from 2015 to 2016

The cylinder is sold individually and two quantities are required per vehicle.

Front hood jack for Porsche 911 type 991 from 2012 to 2020 :

- 991 Carrera - 3.4 350hp (A104) from 2012 to 2016
- 991 Carrera 4 - 3.4 350hp (A104) from 2013 to 2016
- 991 Carrera S - 3.8 400hp (A103) from 2012 to 2016
- 991 Carrera 4 S - 3.8 400hp (A103) from 2013 to 2016
- 991 Carrera GTS - 3.8 430hp (A103) from 2015 to 2016
- 991 Carrera 4 GTS - 3.8 430hp (A103) from 2015 to 2016

- 991 Carrera - 3.0 370hp (DCKA) from 2017 to 2019
- 991 Carrera 4 - 3.0 370hp (DCKA) from 2017 to 2019
- 991 Carrera T - 3.0 370hp (DCKA) from 2018 to 2019
- 991 Carrera S - 3.0 420hp (DCHA) from 2017 to 2019
- 991 Carrera 4S - 3.0 420hp (DCHA) from 2017 to 2019
- 991 Carrera GTS - 3.0 450hp (DCJA) from 2017 to 2019
- 991 Carrera 4 GTS - 3.0 450hp (DCJA) from 2017 to 2019

- 991 Turbo - 3.8 520hp (A171) from 2014 to 2016
- 991 Turbo S - 3.8 560hp (A171) from 2014 to 2016
- 991 Turbo - 3.8 540hp (DABA) from 2017 to 2019
- 991 Turbo S - 3.8 580hp (DBCA) from 2017 to 2019

- 991 GT2 RS - 3.8 700hp (DHNA) from 2018
- 991 GT3 3.8 - 476hp (A175) from 2014 to 2017
- 991 GT3 4.0 - 500hp (DGGA) from 2018 to 2020
- 991 GT3 RS 4.0 - 507hp (A176) from 2015 to 2018
- 991 GT3 RS 4.0 - 520hp (DGGB) from 2018 to 2020

- 991 R 4.0 - 507hp (A176) from 2016

The cylinder is sold individually , and two quantities are required per vehicle.

Ridex Trunk Jack for Bmw 1 Series:
- Compatible with all Bmw 1 Series F20 and F21 versions from 07/2010 to 06/2019.
Need 2 trunk jacks for 1 vehicle.
Sold individually.

For Scirocco 16V and Storm versions,
from chassis 53-E-000 001-> up to chassis ->53-H-060 000

For Scirocco GT, GTX versions
from chassis 53-G-000 001 up to chassis ->53-H-060 000

For Scirocco all versions,
from chassis 53-J-000 001->

1500N tailgate cylinder for VW Transporter T5 since 2010 from chassis n°WV1ZZZ7HZA-200001 with PR codes :A9A+5NC, 5NJ

Stabilus TrunkJack for Bmw 3 Series: Bmw 3 Series E30 Cabriolet: - 320i 6cyl 129hp from 05/1986 to 09/1990 (engine code M20B20)- 325i 6cyl 170hp from 05/1989 to 09/1990 (engine code M20B25)- 318i 115hp from 07/1990 to 04/1993 (engine code M40B18)- 320i 6cyl 129hp from 10/1990 to 01/1993 (engine code M20B20)- 325i 6cyl 170hp from 10/1990 to 01/1993 (engine code M20B25)- M3 cat. 215hp from 03/1990 to 06/1991 (engine code S14) Need 2 cylinders per vehicle. Sold individually.

Vaicotailgate jack for Peugeot 205 all models except cabriolet and utility vehicles
Top quality
Sold individually
Fits all 3-door and 5-door models, including GTI and Rallye.
Not suitable for convertible or utility models.

For VOLKSWAGEN Transporter T6

Front hood cylinder MECATECHNIC selection for BMW 5 Series E39 Sedan and Touring from 02/1995 to 12/2003:

- All models

Piston rod diameter: 8mm
Diameter of fixing points: 16.5mm
Case diameter: 19mm
Force: 680 Newton
Length: 333mm
Stroke length: 100mm
Housing length: 170.5mm

Need 2 engine hood cylinders per vehicle

This product is sold individually.

Original OEM BMW reference: 51238174866