Front & rear panel

The Combi's weld-on front panel is a part of the bodywork that often requires repair or replacement when damaged, rusted or worn. This part refers to the front section of the body, around the bumper, headlights and grilles, which can be replaced or repaired by welding.When properly repaired, the front end will contribute to the longevity and functionality of your vehicle.
This complete front panel is suitable for first-generation VW Combi Bay Window from 08/1967 to 07/1972 up to chassis no. 213 2300 000.High-quality product.

Central connection plate for front panel bottom for Mercedes W123 Saloon, S123 Estate and C123 Coupé.

Radiator support plate for Mercedes W123

For Mercedes W123 all models from 1976 to 1986
Sedan, Estate, Coupé

Front cross member for water-cooled VW Bay Window Combi from 1980 to 2014.

Front end for Volkswagen Golf 6
For VW Golf 6 saloon and estate :- 1.2 TSI 86hp (CBZA)- 1.2 TSI 105hp (CBZB)- 1.4 TSI 122hp (CAXA)- 1.4 TSI 160hp (CAVD, CNWA, CTHD)- 1.6 102hp (BSE, BSF, CCSA, CMXA)- 1.8 TSI 160hp (CDAA)- 2.0 GTI 200hp (CBFA, CCTA)- 2.0 GTI 210hp (CCZB)- 2.0 GTI 235hp (CDLG)- 2.0 R 4Motion 256hp (CDLC, CRZA)- 2.0 R 4Motion 265hp (CDLA)- 2.0 R 4Motion 270hp (CDLF)- 1.6 TDI 90hp (CAYB)- 1.6 TDI 105hp (CAYC)- 2.0 TDI 110hp (CBDC, CLCA)- 2.0 TDI 136hp (CBAA, CFFA)- 2.0 TDI 140hp (CBAB, CFFB, CJAA)- 2.0 TDI 170hp (CBBB, CFGB)
Front frame for radiator support

Upper front panel fitting bracket for MX-5 NB and NBFL

- left or right-hand side
- Sold individually
- Original MAZDA part

Lower front bulkhead for MX5 NB NBFL

- Front lower engine bulkhead, between bumper and engine
- Original MAZDA part

Upper front panel for MX-5 NB NBFL

Suitable for all E36 models including M3

Front end of high-end manufacture for BMW Series 02 E10 phase 2 from 09/1973 to 07/1977:

Berline:
- 1602 85hp phase 2 from 09/1973 to 10/1975 (engine code M116)
- 1802 90hp phase 2 from 09/1973 to 05/1975 (engine code M10B18)
- 1802A auto phase 2 90hp from 07/1974 to 09/1974 (engine code M10B18)
- 1502 1.6l 75hp phase 2 from 11/1974 to 07/1977 (engine code M115)
- 2002 100hp phase 2 from 09/1973 to 11/1975 (engine code M05)
- 2002A auto 100hp phase 2 from 09/1973 to 06/1975 (engine code M05)
- 2002tii 130hp phase 2 from 09/1973 to 11/1975 (engine code M15)

Touring :
- 1802 90hp phase 2 from 09/1973 to 04/1974 (engine code M10B18)
- 2002 100hp phase 2 from 09/1973 to 04/1974 (engine code M05)
- 2002tii 130hp phase 2 from 09/1973 to 04/1974 (engine code M15)

Baur Targa convertible:
- 2002 100hp phase 2 from 09/1973 to 12/1975 (engine code M05)

Throughout its life, the front end of your BMW usually accuses the presence of rust and various shocks. It is not removable, its replacement requires unpointing the old one and welding the new one, making sure that everything is aligned properly.

The front front is delivered bare in black storage paint. Before final painting, it is essential to treat and prepare it with the aim of preventing corrosion from reappearing.

Give your E10 a high quality body part!"

This metal front body panel for BMW E10 is said to be "adaptable" because it is not from the manufacturer.

This quality front skirt located under the bumper is compatible for BMW 3 series E30 phase 2 diesel :

Sedan :
- 324d 6cyl 86hp phase 2 from 09/1987 to 12/1990 (engine code M21D24)
- 324td 6cyl 115hp phase 2 from 02/1987 to 12/1990 (engine code M21D24)

Touring :
- 324td 6cyl 115hp from 01/1988 to 05/1993 (engine code M21D24)

WARNING: Not suitable for petrol versions!

Over the course of its life, the front end of your BMW usually shows signs of rust, impacts and various shocks.

The lower part of the front panel is delivered in black storage paint. It will need to be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

This metal front body panel is called "adaptable" because it does not come from the manufacturer.

Rear sheet metal skirt to be welded and painted (supplied with a weldable primer finish). Model for long boot with outlets for the exhaust. Thick, superior quality sheet metal plate with a design that is very faithful to the original.

For VW Beetle Saloon & Cabriolet
Years: 08/1960 -> 07/1966
Chassis no. 3 192 507 ->116 999 000.

Quality part, referred to as adaptable as it is not supplied by the vehicle manufacturer.

Engine hood for VW Transporter T4, Multivan, California from 01/1996 to 06/2003 from chassis no. 70-T-200001Models with long, rounded nose (type AC1) from 01/1996 to 06/2003

Complete DANSK rear panel for Porsche 914-4 and 914-6:
- 914-4 1.7 - 80 hp (022-W) from 1970 to 1973- 914-4 1.7 - 80 hp (022-EA) from 1972 to 1973- 914-4 1.7 - 72 hp (022-EB) from 1972 to 1973- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976- 914-6 2.0 - 110 hp (901.36/37/38/39) from 1970 to 1972
Due to the production method of this part, "waves" may appear on the sheet metal. It may be necessary to rework the sheet metal to obtain a perfect finish.

Reinforcement sheet metal plate for front sub-frame.
Inside part of the front panel.

Good quality sheet metal part

For VW Split Bus T1, Bully Brazil (1957-1975)

Sheet metal front repair panel for pre-1967 Split Screen Camper Brazil (1957-1975)
Section under the windscreen to the bottom of the nose.
Model with indicator holes.
Superior quality sheet metal part by the company BBT

Left-hand closing plate on front crossmember, retractable at bottom of frontfor VW Transporter T25 / T3, Bus, Van, Caravelle, Carat, Joker, Syncro (4 x 4) from 05/1979 to 07/1992.Original Volkswagen Classic Parts.

Sheet metal for repairing upper front skirt.
15 cm model with cut-out around the nose.
Superior quality panel.

For VW Combi Split Brazil (1957-1975)

External repair plate, lower right corner of front panel, door pillar, weld-on for VW Transporter T25 / T3, Bus, Van, Caravelle, Carat, Joker, Syncro (4 x 4) from 05/1979 to 07/1992