Front & rear panel

Rear face bottom for Opel Ascona A

Opel Ascona A all models from 1970 to 1975

This galvanized steel repair sheet allows you to repair a the underbody below the taillights.

Front panel for Peugeot 106 phase 2 all models (1996-2003)
Front panel with headlamp plates and crossbar.

Front end for Volkswagen Golf 6
For VW Golf 6 saloon and estate :- 1.2 TSI 86hp (CBZA)- 1.2 TSI 105hp (CBZB)- 1.4 TSI 122hp (CAXA)- 1.4 TSI 160hp (CAVD, CNWA, CTHD)- 1.6 102hp (BSE, BSF, CCSA, CMXA)- 1.8 TSI 160hp (CDAA)- 2.0 GTI 200hp (CBFA, CCTA)- 2.0 GTI 210hp (CCZB)- 2.0 GTI 235hp (CDLG)- 2.0 R 4Motion 256hp (CDLC, CRZA)- 2.0 R 4Motion 265hp (CDLA)- 2.0 R 4Motion 270hp (CDLF)- 1.6 TDI 90hp (CAYB)- 1.6 TDI 105hp (CAYC)- 2.0 TDI 110hp (CBDC, CLCA)- 2.0 TDI 136hp (CBAA, CFFA)- 2.0 TDI 140hp (CBAB, CFFB, CJAA)- 2.0 TDI 170hp (CBBB, CFGB)
Front frame for radiator support

Sheet metal trim strip KT004 and KT005 Combi Split

Engine coolant radiator for Polo 6N2 with or without air conditioning:
- 1.4 TDi 75hp (AMF)

Replacement plate for windscreen aperture, to be welded.
Does not have water drainage grooves.

For VW Transporter T4, Multivan
Years: 02/1994 -> 06/2003
Chassis: from no. 70-R-080 424 ->

Right front panel bracket for Bmw 1 Series:
- Compatible with all Bmw 1 Series F20 and F21 versions from 07/2010 to 06/2019 including sport model type m135i and m140i.

Engine bonnet primed for storage, for Volkswagen Transporter T5 from 2009 to 2015,
from chassis 7H-A-050001->
or 7J-A-010001->

Spare wheel mounting plate for VW Beetle from 1961 to 07/1967.

Front V-brace for Bmw 3 Series :
- Compatible with all Bmw 3 Series F30 Sedan and F31 Touring versions from 02/2011 to 06/2019.
- V-shaped reinforcement bar between bumper and front panel.

Metal mounting support for LH headlamp for VOLKSWAGEN Transporter T4 from 1990 to 2003

Rear skirt in sheet metal to be welded and painted. Curved model with 1 left exhaust outlet. Original Volkswagen Classic Parts quality.
For VW Beetle 1600 catalytic injectionYears: since 1994since chassis N° 11-R-053 482

Rear face bottom for Opel Manta A

Opel Manta A all models from 1970 to 1975

This galvanized steel repair sheet allows you to repair a the underbody below the taillights.

Upper front panel fitting bracket for MX-5 NB and NBFL

- left or right-hand side
- Sold individually
- Original MAZDA part

Luggage compartment inner reinforcement plate (end panel)

For VW Kombi Bay WindowT2
Years: 08/1971 -> 07/1979
from chassis no. 212 2000 001 ->

For 430 x 322 mm radiator for 1 fan

Rear cover plate Left for AK350 and AK400

Front panel for Fiat 500 F and L (1965-1972)
For F and L models with "square" Fiat logo.
Made in Italy
Part covered with black protective paint, often scratched during transport/storage, must be removed before priming and painting.Made from old molds, adjustments may be necessary to fit your vehicle perfectly.
Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

Sheet metal repair strip on outer front valance for Brazilian VW Combi Split from 1957 to 1975.
High-quality sheet metal part.

For VW Combi Split Brazil (1957-1975)