Front & rear panel

Signal horn bracket for Volkswagen Passat B3 and B4.

Lower central section of the short front panel,
for 3-part version with radiator grille and
square indicators (AC0), phase 1.
Original Volkswagen Classic Parts.

For Transporter T4, Multivan, Bus,
California, Syncro (4 x 4)
Years: 09/1990 ->09/1994
from chassis no.->70-S-010 965.

Lower metal cross-member to support the engine coolant radiator for Polo 86C from 08/1990->

This pair of sheet metal plugs can be used to fill turn signal holes to age a 72 ->79 Combi front end. Ideal for repairing an older 68 ->71 model to complement a front panel Ref: KT2002.

For VW Combi Bay Window T2a
Years: 08/1967 ->07/1972

Front outer panel without raised base for the location ofthe VW logo.

For VW Kombi Bay Window T2
Years: 08/1972 -> 07/1979
From chassis no. 213 0000 001 ->

This panel may be suitable for older models 68 -> 71 by covering the indicator light holes with shuttersref.: KT2010, and welding an older panel bottom ref.: KT20200.

Pour Corrado, tous moteurs sauf VR6

Habillage de bas de face avant longue, version avec calandre et clignotants arrondis (AC1). Modèle sans trou de lave-phares.

Pour Transporter T4, Multivan, Caravelle, 01/1996 ->04/2003
châssis N° 70-T-200 000 ->70-3-200 000.

Horn bracket for VW Cox from 08/1959 to 07/1973.This bracket can only be fitted to versions with single-blade bumpers.Not suitable for versions with rectangular bumpers.

Right-hand bottom section of short front panel under headlamp, for version in 3 parts with radiator grille and square indicators phase 1 (AC0). Model without hole for headlamp washer.

For Transporter T4, 09/1990 ->09/1994
since chassis No. ->70-S-010 965.

Rear skirt in sheet metal to be welded and painted. Curved model with 1 left exhaust outlet. Original Volkswagen Classic Parts quality.
For VW Beetle 1600 catalytic injectionYears: since 1994since chassis N° 11-R-053 482

Tôle de fermeture avant gauche pour VOLKSWAGEN Transporter T4 de 1991 à 2003.

Guidage d'air sous capot moteur pour VOLKSWAGEN Transporter T4 TDi face avant arrondie code PR-AC1

Jupe avant extérieure de réparation en tôle pour VW Combi Split Brésilien de 1957 à 1975.
Modèle hauteur 10 cm.
Pièce de tôlerie de qualité supérieure.

WARNING: not suitable for Diesel and 16V Audis

WARNING: notsuitable for Diesel, 6-cylinder, Coupé and Cabriolet Audis

Suitable for all Audi A4 models with air conditioning, 4-cylinder Petrol engine and automatic gearbox

DANSK Rear cross member of the engine, exterior part only, for Porsche 912, 911 and 930 :

-> Porsche 912 :
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989

Front panel for Fiat 500 F and L (1965-1972)
For F and L models with "square" Fiat logo.
Made in Italy
Part covered with black protective paint, often scratched during transport/storage, must be removed before priming and painting.Made from old molds, adjustments may be necessary to fit your vehicle perfectly.
Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

DANSK Rear cross member of the engine, exterior part only, for Porsche 911 and 912 until 1973 :

-> Porsche 912 :
- 912 1.6 from 1966 to 1969

-> Porsche 911 :
- 911 2.0 from 1965 to 1967
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973

This rear closure panel for Renault 4L (10/1961-01/1994) - central section is actually higher quality than the original.

This metal panel for the rear crossmember on a Renault 4L is made in Europe from electro-galvanised steel sheets. Located between the two rear rails of the chassis, it has higher corrosion resistance compared to the original sheet metal.