Front & rear panel

Lower front panel for BMW 3 Series E30:

Sedan :

- 316 1.8L 90hp phase 2 from 09/1987 to 07/1988 (engine code M10B18)
- 316i 102hp phase 2 from 07/1987 to 12/1990 (engine code M40B16)
- 318i 115hp phase 2 from 09/1987 to 04/1991 (engine code M40B18i)
- 320i 6cyl 129hp phase 2 from 09/1987 to 02/1991 (engine code M20B20)
- 325i 6cyl 170hp phase 2 from 09/1987 to 01/1991 (engine code M20B25)
- 325ix 6cyl 170hp phase 2 from 09/1987 to 12/1990 (engine code M20B25)

Touring :

- 316i 102hp from 06/1991 to 02/1994 (engine code M40B16)
- 318i 115hp from 02/1989 to 02/1994 (engine code M40B18)
- 320i 6cyl 129hp from 01/1988 to 04/1991 (engine code M20B20)
- 325i 6cyl 170hp from 07/1987 to 04/1993 (engine code M20B25)
- 325ix cat. 6cyl 170hp from 01/1988 to 12/1992 (engine code M20B25)

Coupé :

- 316 1.8L 90hp phase 2 from 09/1987 to 07/1988 (engine code M10B18)
- 316i 102hp phase 2 from 09/1987 to 04/1991 (engine code M40B16)
- 318i 115hp phase 2 from 09/1987 to 04/1991 (engine code M40B18i)
- 318is 136hp phase 2 from 02/1989 to 05/1991 (engine code M42B18)
- 320i 6cyl 129hp phase 2 from 09/1987 to 04/1991 (engine code M20B20)
- 325i 6cyl 170hp phase 2 from 09/1987 to 03/1991 (engine code M20B25)
- 325ix 6cyl 170hp phase 2 from 09/1987 to 02/1991 (engine code M20B25)

Cabriolet :

- 318i 115hp from 07/1990 to 04/1993 (engine code M40B18)
- 320i 6cyl 129hp from 10/1990 to 01/1993 (engine code M20B20)
- 325i 6cyl 170hp from 10/1990 to 01/1993 (engine code M20B25)

WARNING: Not suitable for M3 or diesel versions!

Over the course of its life, the front end of your BMW usually shows signs of rust, impacts and other knocks.

The lower part of the front panel is delivered in stock black paint. It will need to be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

This metal front body panel is called "adaptable" because it does not come from the manufacturer.

Suitable for all Audi A4 models with air conditioning, 4-cylinder Petrol engine and automatic gearbox

Face avant nue,

Pour A3 (8L) :
- Tous modèles du 10/2000 ->05/2003

Outer plate under boot (skirt)

For Combi Bay Window 08/1971 ->07/1979
since chassis no. 212 2000 001->

This quality lower front valance located under the bumper is compatible for BMW 5 series E28 petrol phase 2 from 09/1984:

- 518i 4cyl 105hp from 09/1984 to 12/1987 (engine code M10B18)
- 520i 6cyl 125hp from 09/1984 to 12/1987 (engine code M20B20)
- 525e 6cyl 2.7L 125hp from 09/1984 to 12/1987 (engine code M20B27)
- 525i 6cyl 150hp from 09/1984 to 11/1987 (engine code M30B25)
- 528i 6cyl 184hp from 09/1984 to 12/1987 (engine code M30B28)

ATTENTION: Not suitable for diesel version or for 535i, M5, M535i and M-Technic!

Over the course of its life, the front end of your BMW usually suffers from rust, impacts and various shocks.

The front valance is supplied bare, without covers, and in stock black paint. It will need to be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

This metal front body panel is called "adaptable" because it does not come from the manufacturer.

For 2 fans

Mini Austin frontpanel :
- Compatible with all Mini Austin models from 01/1981 to 05/2000 except Club Man.
This body panel is delivered in storage paint. It will need to be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

For Polo 9N3 from chassis 9N-5-500 001-> for vehicles with air conditioning.

The Combi's weld-on front panel is a part of the bodywork that often requires repair or replacement when damaged, rusted or worn. This part refers to the front section of the body, around the bumper, headlights and grilles, which can be replaced or repaired by welding.When properly repaired, the front end will contribute to the longevity and functionality of your vehicle.
This complete front panel is suitable for first-generation VW Combi Bay Window from 08/1967 to 07/1972 up to chassis no. 213 2300 000.High-quality product.

Front panel with metal lock seat for Polo 86C from 08/1990->

BMW 3 Serieslower front panel:
Bmw 3 Series E30 Convertible:
- 318i 115hp from 07/1990 to 04/1993 (engine code M40B18)- 320i 6cyl 129hp from 10/1990 to 01/1993 (engine code M20B20)- 325i 6cyl 170hp from 10/1990 to 01/1993 (engine code M20B25)
Not suitable for Bmw 3 Series E30 Type M3.
Over the course of its life, the front end of your BMW usually shows signs of rust, impacts and various shocks.
The lower part of the front panel is delivered in stock black paint. It will need to be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

Sheet metal set for rebuilding the complete front end of a first-generation VW Combi Bay Window. Kit includes:1 x KT2002: front panel (211 805 035 J)1 x KT2010: 2 blinker plates (211 805 050)1 x KT20200: lower front panel (211 805 038)
For VW Combi Bay Window T2 from 08/1967 to 07/1972 up to chassis no. 213 2300 000.

Left front headlight cover for Peugeot 206 all models (1998-2012)
Not suitable for 206 +

Lower metal cross-member to support the engine coolant radiator for Polo 86C from 08/1990->

External repair plate, lower left front corner, door pillar, weld-on for VW Transporter T25 / T3, Bus, Van, Caravelle, Carat, Joker, Syncro (4 x 4) from 05/1979 to 07/1992.

Front outerbody panel for VW Beetle from 1961 to 07/1967.

Cowl cross member for Bmw 1 Series:
- Compatible with all Bmw 1 Series F20 and F21 versions from 07/2010 to 06/2019.

Engine bonnet primed for storage, for Volkswagen Transporter T5 from 2003 to 2009,
up to chassis ->7H-A-050000
or ->7J-A-010000

Headlamp housing, for the driver side,

For E60 & E61:
- All models, including M5

For E60 LCI & E61 LCI:
- All models, including M5