Tail light gaskets

Pair of tube seals between headlights and fenders.

For VW Karmann-Ghia type 14
All Coupé and Cabriolet models.
Years : 08/1955 ->07/1974

Round joints for front flasher shells
between cabochons and bases.
Left and right, sold in pairs.

For VW Karmann-Ghia Type 14
Coupé and Cabriolet models
Years: 08/1959 ->12/1963
Chassis N° 2 528 668 ->6 016 120.

3rd brake light gasket for Mazda MX-5 NA

Fits all NA models

A damaged or cracked gasket enables water to seep into your boot and can cause damage to the body and the licence plate light wiring.

Original MAZDA part

Rear light cluster gasket for Mazda MX-5 NA

Suitable for all NA models with RHD or LHD

A worn gasket lets water seep into your boot through the rear light. Also remember to check the condition of your boot liner gasket

Original MAZDA part
Sold individually

Mazda MX5 NB NBFL rear wheel gasket

- If you notice water seeping into your boot from the rear lights, it is because these seals are worn.
- These gaskets go around the two attachment screws for the headlight unit
- Sold individually
- Two seals are required per light unit
- Original MAZDA part

For BMW series (02) from 09/73 to 07/77
(including 2002 Turbo)

4 self-adhesive seals for 2 indicators, left and right.
(2 between body and base 2 between base and glass)

For Combi Bay Window 08/1972 ->07/1979
from chassis N° 213 2000 001->

A license plate light gasket is a small but important component that fits between the license plate light housing and the body of your vehicle, usually around the light located at the rear of the vehicle to illuminate the license plate. The purpose of the gasket is to seal the area and protect the light from the ingress of water, dust and moisture, which can otherwise damage electrical components.
The gasket ensures that water, dust and other external elements do not penetrate the light housing. This prevents short-circuiting and corrosion of electrical components.Moisture can damage bulbs and other electrical components. The gasket prevents moisture from seeping in and damaging the license plate light.License plate illumination is essential if your license plate is to be visible at night, in compliance with regulations. A good gasket ensures that this illumination functions properly in difficult climatic conditions.
The gasket offers excellent resistance to weather, UV and humidity. These materials are also flexible, allowing the gasket to adapt to the contours of the light housing.
If you're replacing a worn gasket, start by removing the old one. It may become stuck over time. Take care not to damage the light housing or bodywork during this step.Clean the area where the gasket will be installed. Use a clean cloth to remove any dirt, rust or adhesive residues that may prevent the new gasket from adhering properly. The surface must be flat.Position the new gasket on the license plate light housing.Once the gasket is in place, return the license plate light to its original position and screw or re-fit the clips needed to hold the light in place.After installation, check that the light housing is correctly secured and that the gasket provides a perfect seal. Also check that the lighting is working properly.
Choose a good-quality gasket to ensure optimum sealing and long life. A poor seal can quickly deteriorate, especially if the vehicle is exposed to harsh weather conditions.As lighting seals can wear out over time, it's a good idea to check their condition regularly, especially if you notice lighting problems or signs of moisture inside the housing.
Suitable for VW Combi Bay Window from 08/1971 to 07/1979.

Shell-type front turn signal gaskets
between cabochons and bases.
Left and right, sold in pairs.

For VW :
- Type 3, ->07/1969

- Karmann-Ghia type 14, 08/1962->07/1969

Gasket between license plate light and hood.

For VW Karmann-Ghia type 14
All Coupé and Cabriolet models.
Years : 08/1955 ->07/1974

Left-hand rear indicator seal for Porsche :
- 964 Carrera 2 and Carrera 4 from 1989 to 1990

Right-hand rear indicator seal for Porsche :
- 964 Carrera 2 and Carrera 4 from 1989 to 1990

Joint d'éclairage de plaque.

Pour VW Coccinelle berline et cabriolet,
Années : 08/1957 ->07/1963
Châssis : 1 600 440 ->5 677 118

Joint pour verre / lentille d'éclairage de plaque d'immatriculation.

Pour VW Coccinelle berline et cabriolet,
Années : 08/1957 ->07/1963
Châssis: 1 600 440 ->5 677 118

Joint d'éclairage de plaque d'immatriculation .

Pour VW Coccinelleberline et cabriolet,
Années : 08/1963 ->07/1966
Châssis : 5 677 119->117 000 000

Registration plate light seal
German quality

For VW Beetle saloon and cabriolet,
Years: 08/1957 ->07/1963
Chassis: 1 600 440 ->5 677 118

Jointfor front indicators between lenses and bases.
Sold per unit, fitted onthe left or the right

For Combi Bay Window, 07/1967 ->07/1972
upto chassis no. ->212 2300 000.

Gasket between rear light base and fender for VW Cox from 08/1955 to 07/1961 and from chassis N° 929 746 to N° 4 010 994.

Left-hand rear light seal for Porsche 911, 930 and 912 :

-> Porsche 912 :
- 912 1.6 from 1969
- 912 E 2.0 from 1976

-> Porsche 911 :
- 911 2.0 T / E / S from 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989