Transmission shaft

Located at the start of the axle near the transmission shaft,

For E81, E87, E87 LCI & E88:
- All models

For E82:
- All models including E82 M
- 135 TDi 130hp from 03/08)

Front left hand drive shafton axle for BMW X5 series E53:

- All models (from April 2000)

Length = 588 mm
External gearing on the wheel side = 30

This output shaft is a new part without exchange (does not require the return of your old part)

Suitable for driver's side installation.

For Audi A3 8L with manual gear box from 10/96 ->
- 1.8 125hp (AGN / APG)
- 1.8T 150hp (AGU / AQA / ARZ) up to chassis ->8L-X-001445

Length: 818 mm

Cardan joint on gearbox and hub side for Porsche 914 from 1970 to 1976 :
- 914-4 1.7 - 80 hp (022-W) from 1970 to 1973- 914-4 1.7 - 80 hp (022-EA) from 1972 to 1973- 914-4 1.7 - 72 hp (022-EB) from 1972 to 1973- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976- 914-6 2.0 - 110 hp (901.36/37/38/39) from 1970 to 1972
Quantities required per vehicle: 4

RCA right front drive shaft for Volkswagen Scirocco 3
For VW Scirocco 3 manual gearbox :- 2.0 TDI 136hp (CFHB)- 2.0 TDI 140hp (CBDB, CFHC)- 2.0 TDI 150hp (CUUB)- 2.0 TDI 170hp (CBBB, CFGB)- 2.0 TDI 177hp (CFGC)- 2.0 TDI 184hp (CUWA, CUXA)- 2.0 TSI 180hp (CULA)- 2.0 TSI 210hp (CCZB)- 2.0 TSI 220hp (CULC)- 2.0 TFSI 200hp (CAWB)- 2.0 R 256hp (CDLC)- 2.0 R 265hp (CDLA)- 2.0 R 280hp (CDLK)
Right side (passenger)
This new driveshaft is sold without deposit and without exchange of your old part.

FEBI driveshaft centering bush for Bmw 7 Series:

Bmw E65 :

- 760i 12 cyl 445hp from 02/2002 to 07/2008 (engine code n73b60a)
- Alpina B7 8 cyl 500hp from 03/2006 to 01/2008 (engine code n62)
- 730d 6 cyl 231hp from 02/2005 to 07/2008 (engine code m57d30tu2)
- 740d 8 cyl 258hp from 11/2001 to 02/2005 (engine code m67d40)
- 745d 8 cyl 330hp from 07/2004 to 07/2008 (engine code m67n)

Bmw E66 :

- 760Li 12 cyl 445hp from 02/2002 to 07/2008 (engine code n73b60a)
- 730Ld 6 cyl 231hp from 03/2005 to 07/2008 (engine code m57d30tu2)

This bushing is pressed into the rear part of the gearbox output flange at flector level, and ensures correct alignment of thelongitudinal shaft (the pin at the end of the transmission shaft is inserted into this centering bushing).

Without it, the shaft will not be correctly aligned and will cause strong vibrations in the chassis.

Nylonprotective cap for Citroën DS transmission shaft bearing.

Mecatechnic selection of passenger-side right-hand drive shafts for MINI II R50 Sedan with manual gearbox until 06/2004 :

- Cooper 1.6L 116hp from 09/2000 to 06/2004 (engine code W10B16)
- One 1.6L 90hp from 09/2000 to 06/2004 (engine code W10B16)

ATTENTION: Not suitable for models from 07/2004!

Features :
- Length: 890 mm
- Number of teeth on wheel side: 26
- Number of gearbox-side teeth: 22
- Wheel-side ball joint diameter: 78
- Gearbox-side ball joint diameter: 70

This complete driveshaft is sold new without exchange of your old part.

This cardan shaft mounting bolt for Mehari - M9X35mm - Bichromate is of superior quality to the original.
Its Bichromaté surface treatment guarantees better-than-original durability.The cardan shafts are mounted on the gearbox using 4 bolts from 1961 to 1973 and 6 bolts from 1973 to 1990.Check your assembly before ordering.

This cardan joint replacement kit for 2cv before 1970 is a quality reproduction.

It is compatible with all 2cv models and derivatives with single and double universal joints.
It allows the replacement of the crosspiece on the wheel side as well as on the gearbox side.

this set contains:
- 1 crosspiece
- 1 grease gun
- 4 circlips

For Audi A3 8L withmanual gearbox from 12/98 ->
- 1.8T 150 hp from chassis 8L-X-001446->
- 1.8T 180 hp (AJQ/APP/ARY)

Short right front driveshaft (passenger side) for Citroën DS from 1965.
New drive shaft for right front wheel, for Citroën DS produced from 1965 onwards.This model features a short driveshaft on the passenger side. It is fitted with "modern" bellows, offering better sealing and durability than the original models.A brand-new, ready-to-install part, perfectly compatible with the transmission systems of post-1965 DS models.
Perfect for restoration or routine maintenance, this driveshaft offers reliability and driving comfort, while respecting the mechanical specificities of vintage models.

New gearbox shaft - left or right

Compatible with Mercedes W123 Saloon:
- 200 94/109hp (123 020/123 220)
- 230 109hp (123 023)
- 230 E 136hp (123 223) until ->02/1985
- 280 156hp (123.030)
- 280 E 185hp (123 033) until ->02/1985
- 200 D 55hp (123 120)
- 220 D 60hp (123 126)
- 240 D 72hp (123 123) until ->02/1985
- 300 D 80/88hp (123 130) until ->02/1985
- 300 TD 125hp (123 133) until ->02/1985

For Mercedes S123 Estate:
- 200 T 101hp (123 280)
- 230 T 109hp (123 083)
- 230 TE 136hp (123 283)
- 280 TE 185hp (123 093)
- 240 T D 72hp (123 183)
- 300 T D 80/88hp (123 190)
- 300 T Turbo Diesel 125hp (123 193)

For Mercedes C123 Coupe:
- 230 C 109hp (123 043)
- 230 CE 136hp (123 243) until ->08/1985
- 280 C 156hp (123 050) until ->07/1979

For Golf 4 with manual gearbox:
- 1.8 petrol
- 1.9 TDi 90hp, 100hp and 110hp
- 2.0 petrol

For New Beetle with manual gearbox:
- 1.9 TDi 90hp and 110hp
- 2.0petrol

With manual gearbox from01/95 ->
- 1.8 115 hp (AFY)
- 1.8 125 hp (ADR)
- 1.8T 150 hp (AEB/ARK/APU)
(Not suitable for Quattro versions)

New cardan joint sold without exchange

With automatic gearbox from 01/95->
- 2.4 V6 Petrol
- 2.8174 hp (AAH)
- 2.8 193 hp (ACK/ALG/AMX)
- 2.5 V6 TDi 150 hp (AFB/AKN) from 09/97 ->

For Audi A3 8L with manual gear box from 10/96 ->
- 1.8 125hp (AGN / APG)
- 1.8T 150hp (AGU / AQA / ARZ) up to chassis ->8L-X-001445

Mecatechnic selection for MINI II R50, R53 Sedan and R52 Convertible with manual gearbox:

R50 Sedan :
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

R52 Cabriolet :
- Cooper S manu. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2008 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2008 (engine code W11B16)

R53 Sedan :
- Cooper S 1.6L 170hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 09/2006 (engine code W11B16)

Features :
- Length: 590 mm
- Number of wheel-side teeth: 26
- Number of gearbox-side teeth: 34
- Wheel-side ball joint diameter: 82
- Gearbox-side ball joint diameter: 78

This complete driveshaft is sold new without exchange of your old part.