Transmission shaft

With automatic gearbox from 01/95->
- 2.4 V6 Petrol
- 2.8174 hp (AAH)
- 2.8 193 hp (ACK/ALG/AMX)
- 2.5 V6 TDi 150 hp (AFB/AKN) from 09/97 ->

With automatic gearbox from 01/95->
- 2.4 V6 Petrol
- 2.8 174hp(AAH)
- 2.8 193 hp (ACK/ALG/AMX)
- 2.5 V6 TDi 150 hp (AFB/AKN) from 09/97 ->
(Not suitable for Quattro versions)

Front right hand drive shafton axle for BMW X5 series E53:

- All models (from April 2000)

Length = 994 mm
Internal gearing on the wheel side = 27
External gearing on the wheel side = 30

This output shaft is a new part without exchange (does not require the return of your old part)

Suitable for passenger side installation.

For X5 E53:
- 3.0d M57
- 3.0i M54
- 4.4i M62
- 4.6is M62

For Roadster & Coupé:
- All models including "M version"

Located between the drive shaft and the centre of the flex disc,

For E90, E91, E92 & E93:
- All models (including xi/xd and M3)

For E90 LCI, E91 LCI, E92 LCI & E93 LCI:
- All models (including xi/xd and M3)

Is located in the centre of the flex disc,

For Roadster (E85) and Coupé (E86):
- All models including Z4 M

Located at the start of the axle near the transmission shaft,

For E81, E87, E87 LCI & E88:
- All models

For E82:
- All models including E82 M
- 135 TDi 130hp from 03/08)

Withmanualgearbox from 01/95 ->
- 1.9 TDi 115 hp (AJM) up to 01/99
-2.5 V6 TDi 150 hp (AFB/AKN) including Quattro

With manual gearbox from 01/95 ->
- 2.4 163hp (AJG)
- 2.4 165hp (AGA / ALF)
- 2.6 150hp (ABC)
- 2.8 174hp (AAH)
- 2.8 193hp (ACK /ALG /AMX)
(Not suitable for Quattro versions)

With manual gearbox from 01/95 ->
- 1.9 TDi 75 hp (AFF)
- 1.9 TDi90 hp(1Z/AHU)
- 1.9 TDi 110 hp (AFN/AVG) including Quattro

Withmanual gearbox from 01/95 ->
- 1.9 TDi 75 hp (AFF)
-1.9 TDi 90 hp (1Z/AHU)
- 1.9 TDi 110 hp (AFN/AVG) including Quattro

Driveshaft for Porsche 924 from 1976 to 1985 with manual gearbox :
- 924 2.0 - 125 hp (XJ/XK) from 1976 to 1985- 924 2.0 Turbo - 170 hp (M31.01) from 1979 to 1980- 924 2.0 Turbo - 177 hp (M31.03) from 1981 to 1985
The driveshaft is supplied complete with assembly kit.

This new transmission shaft for Renault 4 from August 1973 to 1992 - 665mm 23/22 is faithful to the original.

This drive shaft for R4 with Cléon engine has 23 and 22 splines.

Compatible models:
- R4 GTL type R1128 : 01/1978 to 12/1993
- R4 Savane type R112C : 09/1986 to 12/1993
- R4 Raised van type R2108 : 10/1972 to 07/1975
- R4 F6 extended van type R2370 : 05/1975 to 11/1985
- R4 F6 Pick up type 3C2370 : 07/1978 to 11/1985
- R4 Long glass van R2430 : 05/1975 to 07/1978
- R4 F4 type R210B : 09/1981 to 05/1990
- R4 F4 station wagon type 239B : 09/1981 to 05/1990

With manual gearbox from 01/95 ->
- 1.6 100hp (ADP / AHL / ANA )
- 1.6 102hp (ALZ)
- 1.8 / 1.8 20V and 1.8T Quattro (except AFY / ADR / AEB engines)

With manual gearbox from 01/95 ->
- 1.6 100hp (ADP/AHL / ANA )
- 1.6 102hp (ALZ)
- 1.8 / 1.8 20V and 1.8T Quattro (except AFY / ADR / AEB engines)

For Audi 80 with manual gearbox from 11/91->
- 1.9 TDi 90hp (1Z)

New passenger-side right front drive shaft for Audi A3 8P with 6-speed manual gearbox:

- 3.2L FSI V6 Quattro 250hp (BUB, BMJ, BDB)
- 2.0L TDI Quattro 140hp (BKD, BMM)
- 2.0L TDI Quattro 170hp (BMN)

Supplied complete with gearbox-side gasket and hardware (6 screws and the base mounting screw).

Technical specifications:
- Length: 601mm
- Number of teeth on wheel side: 36

This new cardan shaft is sold without instructions and without exchange of your old part.

FEBIdriveshaft centering bush for Bmw 6 Series:

- Compatible with all Bmw 6 Series E24 versions from 10/1975 to 06/1989 including Bmw E24 M6 engine code s38.

This sleeve is pressed into the rear part of the gearbox output flange at the flector and allows correct alignment of thelongitudinal shaft (the rod at the end of the transmission shaft is inserted into this centering sleeve).

Without it, theshaft will not be correctly aligned and will cause strong vibrations in the chassis.

Right front driveshaft for 5-speed manual gearbox only for VW Transporter T5 from 2010 to 2015:From chassis no. WV1ZZZ7HZA-200001 or no. WV1ZZZ7JZA-200001 :- 2.0 TDi 84hp (CAAA)- 2.0 TDi 102hp (CAAB)- 2.0 TDi 114hp (CAAD)
This driveshaft is sold on exchange. The deposit will be refunded on return of your old drive shaft to our premises.