Drive shaft support

For E46 Sedan from 02/98 ->04/05 and Touring from 10/99 ->02/05 :
- 316 i 1.9 105hp (engine M43) manual gearbox 04/99->
- 316 i 1.8 115hp (engine N42) automatic gearbox 05/01->
- 318 i 1.9 118hp (engine M44) manual gearbox 04/99 ->01
- 318 i 2.0 143hp (N42 engine) manual gearbox

For E46 Sedan from 02/98 ->04/05 :
- 316 i N42 Manual gearbox 05/01->
- 318 i N42 Manual gearbox 03/01->
- 325 xi M54
- 330 xi M54
- 330 xd M57

Central driveshaft bearing for Bmw 7 Series:

- Compatible with all Bmw 7 Series E23 versions from 10/1976 to 06/1986 including 745i engine code m30.

Suitable for manual and automatic gearboxes.

For E36 Coupé from 03/92 ->04/99:
- All models, except M3

For E36 Cabriolet from 03/93 ->04/99:
- All models, except M3

For E36 Compact from 03/94 ->08/00:
- 316 i 1.6 (engineM43) automatic gearbox
- 316 i 1.9 (M43 engine) automatic gearbox
- 323Ti

For E12 :
- For all models
(Please note that there are 2 mountings, check your original part number before ordering)

For E28:
- 518 M10 (manual gearbox only)
- 518 i M10 (manual and automatic gearbox)
-520 i M20 (manual and automatic gearbox)
- 524 d M21 (manual gearbox only)
- 524 td M21 (manual and automatic)
- 525 e M20 (manual and automatic)
- 525 i M30 (automatic gearbox only)
- 528 i M30 (automatic gearbox only)
- 535 i M30 (5-speed Sport gearbox and automatic only)
- M535i M30 (5-speed Sport gearbox and automatic only)

Driveshaft bearing support with its bearing,
for Mercedes E Class Type W124 Saloon:
- 260 E 4-Matic 16hp (124 226)
- 280 E 193hp (124 028)
- 300 E 180/190hp (124 030), 4-Matic (124 230)
- 320 E 220hp (124 032)
- 250 Turbo D 126hp (124 128)
- 300 D 113hp (124 130), 4-Matic (124 330)
- 300 D 136hp (124 131)
- 300 Turbo D 147hp (124 133), 4-Matic (124 333)

For Mercedes E Class Type S124 Estate:
- 280 TE 193hp (124 088)
- 300 TE 180hp (124 090), 4-Matic (124 290)
- 250 T Turbo D 126hp (124 188)
- 300 TD 113hp (124 190), 136hp (124 191)
- 300 T Turbo D 147hp (124 193), 4-Matic (124 393)

For Mercedes E Class Type A124 Cabriolet:
- 300 CE 231 (124 061)

For Mercedes E Class Type C124 Coupé:
- 300 CE 180hp (124 050)
- 320 CE 220hp (124 052)

For E36 Compact:
- 316 i 1.9 / 1.6 automatic gearbox
- 318 ti M44 /M42 automatic gearbox
- 323 ti

For E36 Coupé:
- 316 i automatic gearbox
- 318 is M42 manual gearbox
- 318 is M44 automatic gearbox
- 320 i M50 / M52 automatic gearbox
- 325 i automatic gearbox
- 325 i from 12/94->, manual gearbox
- 323 i and 328 i

For E36 Cabriolet:
- 318 i automatic gearbox
- 320 i M52 / M50 automatic gearbox
- 323i
- 325 i automatic gearbox
- 325 i from 12/94->, manual gearbox

For E36 Saloon:
- 316 i and 318 M40
- 323 i, 328 i
- 316i and318 i M43 automatic gearbox
- 318 is M44 / M42 automatic gearbox
- 320 i M50 / M52 automatic gearbox
- 325 i manual gearbox
- 325 i up to->11/90, automatic gearbox
- 325 tds / td manual gearbox

For E36 Touring, automatic gearbox:
- 316 i, 318 i, 320 i automatic gearbox
- 323 i, 328 i
- 325 tds

FEBI Driveshaft Mount and Bearing for Bmw 6 Series:

Bmw E63 :

- 630i 6 cyl 258hp from 02/2004 to 07/2007 (engine code n52b30a)
- 630i 6 cyl 272hp from 04/2006 to 07/2010 (engine code n53b30a)
- 630i 6 cyl 258hp from 05/2006 to 07/2010 (engine code n52b30n)

Bmw E64 :

- 630i 6 cyl 258hp from 03/2004 to 07/2007 (engine code n52b30a)
- 630i 6 cyl 272hp from 04/2006 to 07/2010 (engine code n53b30a)
- 630i 6 cyl 258hp from 05/2006 to 07/2010 (engine code n52b30n)

This high quality transmission support offers greater durability and is an ideal replacement for the original part.

FEBI driveshaft support and bearing for Bmw 6 Series:

Bmw E24 :

- 628 csi 184hp from 05/1982 to 05/1987 automatic gearbox (engine code m30)
- 635 csi 218hp from 05/1982 to 04/1989 automatic gearbox (engine code m30)

Intermediate transmission bearing with bearing,

For E81 & E87 LCI:
- 116 d N47
- 116 i 1.6 N43 & N45N
- 116 i 2.0 N43
- 118 d N47
- 118 i N43 & N46N
- 120 d N47
- 120 i N43 & N46N
- 123 d N47S (from 03/09 for manual transmission)
- 130 i N52N

For E82 & E88:
- 118 d N47
- 118 i N43 & N46N (E88 only)
- 120 d N47
- 120 i N43 & N46N
- 123 d N47S (from 03/09 for manual transmission)
- 125 i N52N
- 135 i N54 (automatic transmission only, from 09/07)

For E87:
- 116 i N45
- 118 d M47N2
- 118 i N46
- 120 d M47N2
- 120 i N46
- 130 i N52

Intermediate drive shaft bearing,

For E60 & E61:
- 525 d M57N with manual transmission
- 525 d M57N with automatic transmission up to ->12/06
- 530 d M57N & M57N2
- 530 xd M57N2 with manual transmission
- 530 xd M57N2 with automatic transmission up to ->03/06
- 535 d M57N
- 540 i N62N with manual transmission (E60 only)
- 540 i N62N with automatic transmission up to ->03/06 (E60 only)
- 545 i N62
- 550 i N62N

For E60 LCI & E61 LCI:
- 525 d/xd M57N2 with manual transmission
- 530 d M57N2
- 530 xd M57N2 with manual transmission
- 535 d M57N2
- 540 i N62N with manual transmission (E60 only)
- 550 i N62N

ForE36 Coupé from 03/92 ->04/99:
- 318 is
- 320 i
- 325 i

ForE36 Cabriolet from 03/93 ->04/99:
- 318 i
- 320 i
- 325 i

For Saloon & Touring:
- 540i M60

For E46 Sedan :
- 318 d M47

For E46 Saloon from 07/97 ->09/02:
- 318 D 2.0 115hp (M47 / M47N)
- 320 D 2.0 136hp (M47 / M47N)
- 320 D 2.0 150hp (M47 / M47N)

For E46 Touring from 06/98 ->09/01:
- 318 D 2.0 115hp (M47 / M47N)
- 320 D 2.0 136hp (M47 /M47N)
- 320 D 2.0 150hp (M47 / M47N)

For E46 Compact from 05/00 -> 12/04:
- 318 TD 2.0 115hp (M47N)
- 320 TD 2.0 150hp (M47N)

Transmission drive plate for Citroën Traction 11 CV since March 1950.
This gearbox output plate connects the drive shafts to the gearbox. Designed for Citroën Traction 11 CV with type B gearbox.
Suitable for 10( 16 splines) screws.
Dimensions: 79x70x39mm
Compatible models :- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 03/1950 à 01/1955, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 03/1950 à 01/1955, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11C Commercial 11 "Performance", type 11B from 03/1954 to 1957, Engine, type 11cv D 1911cc (59hp)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 02/1955 à 02/1956, Moteur, type 11cv D 1911cc (59cv)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 02/1955 à 07/1957, Moteur, type 11cv D 1911cc (59cv)

Topran driveshaft bearing andbracket for Bmw 5 Series:
Bmw 5 Series E34 Sedan:
- 518i 4cyl 113hp phase 1 from 04/1989 to 05/1994 (engine code M40B18)- 520i 129hp phase 1 from 06/1987 to 04/1990 (engine code M20B20)- 520i 150hp phase 1 from 05/1990 to 08/1992 (engine code M50B20)- 520i 150hp phase 1 from 09/1992 to 03/1994 (engine code M50B20TU)- 520i 150hp phase 2 from 04/1994 to 12/1995 (engine code M50B20TU)- 525i 170hp phase 1 from 06/1987 to 04/1990 (engine code M20B25)- 525i 192hp phase 1 from 05/1990 to 08/1992 (engine code M50B25)- 525i 192hp phase 1 from 09/1992 to 03/1994 (engine code M50B25TU)- 525i 192hp phase 2 from 04/1994 to 12/1995 (engine code M50B25TU)- 525ix 192hp phase 1 from 04/1991 to 08/1992 (engine code M50B25)- 525ix 192hp phase 1 from 09/1992 to 03/1994 (engine code M50B25TU)- 525ix 192hp phase 2 from 04/1994 to 12/1995 (engine code M50B25TU)- 530i 188hp phase 1 from 06/1987 to 05/1990 (engine code M30B30)- 530i V8 218hp phase 1 from 08/1992 to 03/1994 (engine code M60B30)- 530i V8 218hp phase 2 from 04/1994 to 12/1995 (engine code M60B30)- 535i 211hp phase 1 from 03/1987 to 04/1993 (engine code M30B35)- 3.6L 6cyl 315hp phase 1 from 04/1988 to 04/1992 (engine code S38B36)- 3.8L 6cyl 340hp phase 1 from 07/1991 to 03/1994 (engine code S38B38)- 3.8L 6cyl 340hp phase 2 from 04/1994 to 07/1995 (engine code S38B38)

Bmw 5 Series E34 Touring:
- 520i 150hp phase 1 from 11/1990 to 08/1992 (engine code M50B20)- 520i 150hp phase 1 from 09/1992 to 03/1994 (engine code M50B20TU)- 520i 150hp phase 2 from 04/1994 to 06/1996 (engine code M50B20TU)- 525i 192hp phase 1 from 12/1990 to 08/1992 (engine code M50B25)- 525i 192hp phase 1 from 09/1992 to 03/1994 (engine code M50B25TU)- 525i 192hp phase 2 from 04/1994 to 06/1996 (engine code M50B25TU)- 525ix 192hp phase 1 from 07/1991 to 08/1992 (engine code M50B25)- 525ix 192hp phase 1 from 09/1992 to 03/1994 (engine code M50B25TU)- 525ix 192hp phase 2 from 04/1994 to 03/1996 (engine code M50B25TU)- 530i V8 218hp phase 1 from 05/1992 to 03/1994 (engine code M60B30)- 530i V8 218hp phase 2 from 04/1994 to 06/1996 (engine code M60B30)- 3.8L 6cyl 340hp phase 1 from 03/1992 to 03/1994 (engine code S38B38)- 3.8L 6cyl 340hp phase 2 from 04/1994 to 08/1995 (engine code S38B38)

Intermediate driveshaft bearing for VW LT from 1996 to 2006.

Drive shaft support
Comes with the roller bearing.
Inner diameter: 30mm

Suitable for BMW 5 Series E39
- Saloon 11/95 ->06/03
523 i

- Touring (Estate) 01/97 ->05/04
523 i

Driveshaft support with its bearing, MEYLE Original Quality, for Mercedes W123 Saloon, S123 Estate and C123 Coupé