Side skirt

Part referred to as adaptable as it is not supplied by the manufacturer.
Quality item.

Part referred to as adaptable as it is not supplied by the manufacturer.
Quality item.

Not suitable for Cabriolet

Part said to be "adaptable" because it does not come from the manufacturer.
Quality item.

Repair plate for the left-hand rocker panel.Outer part located under the door to be welded.
Suitable for VW Type 3 all models from 04/1967 to 07/1973.

Part referred to as adaptable as it is not supplied by the manufacturer.
Quality item

Right-hand side sill.
Weld-on replacement part made of sheet metal.

Compatible with Volkswagen Polo 6N1 and 6N2 3-door until ->10/2000.

(Not suitable for 6N2 GTi model)

Suitable for all Golf 2 models
Two needed per vehicle

Left side sill made of sheet metal.
Includes the part that rises up to the front and rear door sills.

Suitable for Volkswagen Passat type 35i phase 2 from 10/1993->, Saloon or estate

Right-hand exterior sill in sheet metal.
Includes the part that rises up to the front and rear door sills.

Suitable for Volkswagen Passat type 35i phase 2 from 10/1993->, Saloon or estate

Rear chassis reinforcement plate for Fiat 500 F, L and R (1965-1975)
This reinforcement is located at the level of the jack support.
Can be mounted on left or right.
Made in Italy
For models listed below:- Fiat 500 F from 1965 to 1968- Fiat 500 L from 1968 to 1972- Fiat 500 R from 1972 to 1975
Made from old molds, adjustments may be necessary to fit your vehicle perfectly.
Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

Passenger-side metal rocker panel right for Audi A4 B5 Sedan and Avant:

- All models from 11/1994 to 09/2001

Sheet thickness: 1 mm

The right-hand sill sheet metal is delivered bare or in black stock paint, depending on the availability of our suppliers. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.

This external part of the weld-on door sill is "adaptable", as it does not come from the manufacturer.

Right-hand rear inner rocker panel for Fiat 500 F, L and R (1965-1975)

For models listed below:
- Fiat 500 F from 1965 to 1968
- Fiat 500 L from 1968 to 1972
- Fiat 500 R from 1972 to 1975

Italian manufacture

Made from old molds, adjustments may be necessary to fit your vehicle perfectly.

Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

Left inner rocker panel next to floor including jack support. Thick top quality as original for VW Transporter T25/T3, Bus, Van, Caravelle, Carat, Joker, Syncro (4x4) from 05/1979 to 07/1992

Jack support cover for Mercedes Pagoda

For Mercedes SL W113 Pagode all models :
- 230 SL ( 113.042) from 07/1963 to 01/1967
- 250 SL (113.043) from 12/1966 to 01/1968
- 280 SL (113.044) from 01/1968 to 03/1971

This rubber cover for the jack support hole is suitable for the left or right side.
Sold individually

Straight reinforcement angle for VW Combi Bay Window from 08/1967 to 07/1979.

These rocker covers for Citroën DS (1965-1972) - Polished stainless steel are a quality remanufacture.

This set of rocker panels for DS Pallas includes the 2 right and left side elements. In polished stainless steel, it was originally offered on DS Pallas, but is compatible with most first- and second-generation sedans.

These rocker covers for Citroën ID (1965-1972) - Polished stainless steel are a quality remanufacture.

This set of rocker panels for DS Pallas includes the 2 right and left side elements. In polished stainless steel, it was originally offered on DS Pallas, but is compatible with most first- and second-generation ID sedans.