Side skirt

Inner stiffener behind the rocker panel under the side doors, loading side, left or right-hand.
Top quality reproduction with sheet metal 1 mm thick

For Combi Split 1950 ->07/1967

Outer rocker panel + inner stiffener welded under the side doors, loading side, left or right-hand.

For Combi Split 1950 ->07/1967

Outer shell
Left or right side without door.
Repair height: approx. 20 cm

For Combi Split 1950 ->07/1967

Angle stiffener plate behind the rocker panel
Left or right-hand side under floor between the jack supports
Top quality reproduction with 1 mm thick plate

For Combi Split 1950 ->07/1967

Made from aluminium Billet by EMPI
- Attractive: adds an attractive finish to jack holes
- Use: protects the jack holes from mud and rust
- Practical: removes the wheel trims without damaging the 2 built-in claws.

For Beetle, Karmann-Ghia & Combi

Right-side underbody repair plate for English version. Suitable for repairing part of the right-hand underbody of single- or double-cab Pick-up versions in left-hand drive for VW Transporter T25/T3, Bus, Van, Caravelle, Carat, Joker, Syncro (4x4) from 05/1979 to 07/1992.Length: approx. 130 cm

Leftrocker panel for Bmw 3 Series:
- Compatible with all Bmw 3 Series E30 Sedan and Touring versions from 07/1981 to 07/1994.
Sheet metal for rocker panels.

Right outer rocker panel for Fiat 500 F, L and R (1965-1975)
For models listed below:- Fiat 500 F from 1965 to 1968- Fiat 500 L from 1968 to 1972- Fiat 500 R from 1972 to 1975
Right side (passenger)Italian manufacture
Part covered with black protective paint, often scratched during transport/storage, must be removed before priming and painting.Made from old molds, adjustments may be necessary to fit your vehicle perfectly.
Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

Left outer rocker panel for Fiat 500 F, L and R (1965-1975)
For models listed below:- Fiat 500 F from 1965 to 1968- Fiat 500 L from 1968 to 1972- Fiat 500 R from 1972 to 1975
Left side (driver)Italian manufacture
Part covered with black protective paint, often scratched during transport/storage, must be removed before priming and painting.Made from old molds, adjustments may be necessary to fit your vehicle perfectly.
Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

Right-hand jack support for Fiat 500 F, L and R (165-1975)

mounts on right (passenger) side

Made in Italy

For models listed below:
- Fiat 500 F from 1965 to 1968
- Fiat 500 L from 1968 to 1972
- Fiat 500 R from 1972 to 1975

Made from old molds, adjustments may be necessary to fit your vehicle perfectly.

Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

Right-hand innerrocker panel for Mini Austin:
- Compatible with all Mini Austin versions from 09/1958 to 06/1994 including Cooper S 77hp.
This body panel is delivered in storage paint. It will need to be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

Couleur : noir satin

Left front rocker panel for Volkswagen Karmann Ghia type 14 (08/1959-)

Item 04

Right front rocker panel for Volkswagen Karmann Ghia type 14 (08/1959-)

Item 05

Ref. 06

Ref. 07

Ref. 08

Ref. 09

Porsche 911 Turboleft sill cover decoration :
- 911 Turbo 3.3 from 1978 to 1989
Sheet metal in storage paint, to be sanded and primed before painting.
Obturator (17), rubber strip (8) and screws (on the diagram in the third illustration photo) not supplied.

M5 typerocker panel for Bmw 5 Series:
- Compatible with all Bmw 5 Series E34 Sedan and Touring versions from 07/1987 to 06/1996, all engines included.