Floor

Suitable for:
- Golf 1 Saloon and Cabriolet
- Caddy
- Jetta
- Sirocco

Fire wall between the engine compartment and the cab
Specific for Golf 2 G60 Rallye (4 x 4) with left-hand drive

Rear Quarter Floor for Mercedes

For Mercedes SL R107 all models from 1971 to 1989
Does not fit SLC C107 Coupe
Right Side (Passenger)

This sheet metal floor repair replaces the floor under the passenger seat of the SL R107 that may be affected by corrosion.

Rear Quarter Floor for Mercedes

For Mercedes SL R107 all models from 1971 to 1989
Does not fit SLC C107 Coupe version
Left side (driver)

This sheet metal floor repair replaces the floor under the driver's seat of the SL R107 that may be affected by corrosion.

Partition panel for fuel tank compartment for VW Combi Split Pick-up from 03/1955 to 07/1967.

Plate connecting the spare wheel support under the body for VOLKSWAGEN Transporter T4 from 1991 to 1996

Engine compartment bulkhead for VW Combi Split from 08/1963 to 07/1967.

Trunk Floor rear with the spare wheel housing for BMW 02 Series E10:

Berline:
- 1600-2 85hp phase 1 from 03/1966 to 03/1971 (engine code M116)
- 1602 85hp phase 1 from 04/1971 to 08/1973 (engine code M116)
- 1602 85hp phase 2 from 09/1973 to 10/1975 (engine code M116)
- 1600ti 105hp phase 1 from 09/1967 to 12/1968 (engine code M116)
- 1802 90hp phase 1 from 04/1971 to 08/1973 (engine code M10B18)
- 1802 90hp phase 2 from 09/1973 to 05/1975 (engine code M10B18)
- 1802A auto phase 2 90hp from 07/1974 to 09/1974 (engine code M10B18)
- 1502 1.6l 75hp phase 2 from 11/1974 to 07/1977 (engine code M115)
- 2002 100hp phase 1 from 01/1968 to 08/1973 (engine code M05)
- 2002ti 120hp phase 1 from 09/1968 to 04/1972 (engine code M05)
- 2002A auto 100hp phase 1 from 01/1969 to 08/1973 (engine code M05)
- 2002tii 130hp phase 1 from 04/1971 to 08/1973 (engine code M15)
- 2002 100hp phase 2 from 09/1973 to 11/1975 (engine code M05)
- 2002A auto 100hp phase 2 from 09/1973 to 06/1975 (engine code M05)
- 2002tii 130hp phase 2 from 09/1973 to 11/1975 (engine code M15)
- 2002Turbo 170hp from 07/1973 to 07/1975 (engine code M31)

Cabriolet:
- 1600-2 85hp from 01/1968 to 06/1971 (engine code M116)
- 2002 100hp from 01/1971 to 06/1971 (engine code M05)

Cabriolet Baur Targa:
- 2002 100hp phase 1 from 06/1971 to 08/1973 (engine code M05)
- 2002 100hp phase 2 from 09/1973 to 12/1975 (engine code M05)

The corrosion in the trunk floor of the E10, is unfortunately a "classic" of the model.
This very high quality remanufacturing part will offer you the best solution to restore your 02'.

Spare wheel bin in the bottom of trunk for BMW 02 Series E10:

Berline:
- 1600-2 85hp phase 1 from 03/1966 to 03/1971 (engine code M116)
- 1602 85hp phase 1 from 04/1971 to 08/1973 (engine code M116)
- 1602 85hp phase 2 from 09/1973 to 10/1975 (engine code M116)
- 1600ti 105hp phase 1 from 09/1967 to 12/1968 (engine code M116)
- 1802 90hp phase 1 from 04/1971 to 08/1973 (engine code M10B18)
- 1802 90hp phase 2 from 09/1973 to 05/1975 (engine code M10B18)
- 1802A auto phase 2 90hp from 07/1974 to 09/1974 (engine code M10B18)
- 1502 1.6l 75hp phase 2 from 11/1974 to 07/1977 (engine code M115)
- 2002 100hp phase 1 from 01/1968 to 08/1973 (engine code M05)
- 2002ti 120hp phase 1 from 09/1968 to 04/1972 (engine code M05)
- 2002A auto 100hp phase 1 from 01/1969 to 08/1973 (engine code M05)
- 2002tii 130hp phase 1 from 04/1971 to 08/1973 (engine code M15)
- 2002 100hp phase 2 from 09/1973 to 11/1975 (engine code M05)
- 2002A auto 100hp phase 2 from 09/1973 to 06/1975 (engine code M05)
- 2002tii 130hp phase 2 from 09/1973 to 11/1975 (engine code M15)
- 2002Turbo 170hp from 07/1973 to 07/1975 (engine code M31)

Cabriolet:
- 1600-2 85hp from 01/1968 to 06/1971 (engine code M116)
- 2002 100hp from 01/1971 to 06/1971 (engine code M05)

Cabriolet Baur Targa:
- 2002 100hp phase 1 from 06/1971 to 08/1973 (engine code M05)
- 2002 100hp phase 2 from 09/1973 to 12/1975 (engine code M05)

The spare wheel housing is accompanied by rampant corrosion on the 02'. Difficult to form without time and the right tools, this new body part is a so-called "adaptable" part of very high quality. It will save you a considerable amount of time, for a high level rendering in your restoration.

Lower hinge mounting on
swivelling spare wheelholder.
Repair kit containing:
- 1 mounting
- 1 hook
- 1 spring
- 1 tightening pin
- 1 Allen bolt M8 x 20

For VW TransporterT25 / T3
Syncro version (4 x 4)
10/1984 ->07/1992

Tube for repairing central underfloor heating pipe
Diameter: 70 mm
Length: 1270 mm

For VW Combi Split, 1950 ->07/1967

Inner longitudinal chassis plate at front right for VW Combi Split from 03/1955 to 07/1967.

DANSK Rear right seat pan for Porsche 911 and 912 from 1965 to 1972 :

-> Porsche 912 :
- 912 1.6 from 1966 to 1969
- 912 E 2.0 from 1976

-> Porsche 911 :
- 911 2.0 from 1965 to 1967
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973

Ideal for the restoration of the backseat floor

Welded rear floor panel.
Located above the engine compartment.
With this repair element, you opt for an easier, faster and higher-quality restoration.
The sheet is protected by a weldable anti-rust primer which can be painted after a light sanding for adhesion.

For VW Combi Split Bus (03/1955-07/1963)

Due to its size, this item is available for pick-up at the Wambrechies store counter only. You can also send your transport for collection.

Floor plate on rear axle.
With this repair element, you opt for an easier, faster and higher-quality restoration.
The sheet metal is protected by a weldable anti-rust primer, which can be painted after a light sanding for adhesion.

Suitable for VW Combi Split (03/1955-07/1967)

Due to its size, this item is available for pick-up at the Wambrechies store counter only. You can also arrange for your transporter to be collected.

Inner longitudinal chassis plate at front left for VW Combi Split from 03/1955 to 07/1967.

This chassis repair trim for Renault 4L (10/1961-01/1994) is high quality.

This chassis repair panel for Renault 4L is compatible with all models. Made of 0.8mm thick electro-galvanised steel sheet metal, it is higher quality than the original panel.

This shaped trim gives you a durable repair without having to replace the whole chassis, if the corrosion is not too extensive.

DANSK rear trunk floorpan for Porsche 914-4 and 914-6 :

- 914-4 1.7 - 80 hp (022-W) from 1970 to 1973
- 914-4 1.7 - 80 hp (022-EA) from 1972 to 1973
- 914-4 1.7 - 72 hp (022-EB) from 1972 to 1973
- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976
- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976
- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974
- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976
- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976
- 914-6 2.0 - 110 hp (901.36/37/38/39) from 1970 to 1972

DANSK floorpan battery box with bumper support for Porsche 356 B T5 :

- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

Also suitable for Carrera versions

DANSK floorpan battery box with support for Porsche 356 B T6 and C :

-> Porsche 356 B T6 :
- 356 B 1600 - 60 hp (616/1) from 1962 to 1963
- 356 B 1600 S - 75 hp (616/12) from 1962 to 1963
- 356 B 1600 Super 90 - 90 hp (616/7) from 1962 to 1963

-> Porsche 356 C :
- 356 C 1600 - 75 hp (616/15) from 1964 to 1965
- 356 SC 1600 - 95 hp (616/16) from 1964 to 1965

Also suitable for Carrera versions